黄诺帝 副教授
所在系所智能制造与信息工程研究所
办公电话
通讯地址机械与动力工程学院A楼733室
电子邮件nhuang@sjtu.edu.cn
个人主页


教育背景 2010.09-2017.03 上海交通大学机械工程专业，博士
2015.08-2016.08 佐治亚理工学院机械工程系，联合培养博士
2006.09-2010.06 武汉大学机械设计制造及其自动化专业，学士

工作经历 2020.04至今 上海交通大学机械与动力工程学院，长聘教轨副教授
2019.01-2020.02 多特蒙德工业大学ISF研究所，洪堡****/博士后
2017.04-2020.04 武汉大学动力与机械学院，博士后

研究方向 数字化智能化制造：
1. 数字化测量
2. 加工-测量一体化制造
3. 机床误差识别与补偿

科研项目 2021.01-2024.12 国家自然科学基金面上项目“基于加工-测量-仿真一体化的薄壁件切削变形与颤振自适应闭环控制”，负责人
2020.11-2022.10 上海市浦江人才计划D类，负责人
2020.02-2021.12 上海航天科技创新基金“基于高效三维几何原位测量的多轴数控加工过程优化”，负责人
2019.07-2020.04 博士后科学基金特别资助项目“基于三维原位测量的薄壁件切削变形识别、预测与补偿”，负责人
2019.01-2020.12 华中科技大学数字制造装备与技术国家重点实验室开放课题，负责人
2019.01-2020.12 中南大学高性能复杂制造国家重点实验室开放课题，负责人
2018.01-2019.04 博士后科学基金面上项目“深腔结构件插铣加工机理及其工艺规划”，负责人
2018.01-2020.12 自然科学基金青年科学基金“面向接触式原位测量的复杂曲面加工精度检测方法研究”，负责人

代表性论文专著 [1] Huang X, Wu S, Liang L, Li X, Huang N*. Efficient trochoidal milling based on medial axis transformation and inscribed ellipse[J]. The International Journal of Advanced Manufacturing Technology, 2020: 1-8.
[2] Huang N*, Krebs E, Baumann J, Zhou Y, Wu S, Biermann D. Experimental investigation on influence of engagement angle and tool geometry on plunge milling[J]. The International Journal of Advanced Manufacturing Technology, 2020, https://doi.org/10.1007/s00170-020-05480-x.
[3] Huang N*, Krebs E, Baumann J, Wirtz A, Jaeger M E, Biermann D. A universal pocket plunge milling method to decrease the maximum engagement angle[J]. Journal of Manufacturing Science and Engineering, 2020, 142(8): 081005 .
[4] Huang N, Jin Y, Lu Y, Yi B, Li X, Wu S*. Spiral toolpath generation method for pocket machining[J]. Computers & Industrial Engineering, 2020, 139: 106142.
[5] Huang N, Jin Y, Li X, Liang L, Wu S*. Identification of integrated geometric errors of rotary axis and setup position errors for 5-axis machine tools based on machining test[J]. The International Journal of Advanced Manufacturing Technology, 2019, 102(5-8): 1487-1496.
[6] Huang N, Jin Y, Lu Y, Li X, Wu S*. Plunge milling with constant scallop height by adaptively modifying the step interval for pocket wall[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(1-4): 203-208.
[7] Huang N, Yin C, Liang L, Hu J, Wu S*. Error compensation for machining of large thin-walled part with sculptured surface based on on-machine measurement[J]. The International Journal of Advanced Manufacturing Technology, 2018, 96(9-12): 4345-4352.
[8] Huang N, Lynn R, Kurfess T*. Aggressive Spiral Toolpaths for Pocket Machining Based on Medial Axis Transformation[J]. Journal of Manufacturing Science and Engineering, 2017, 139(5): 051011.
[9] Huang N*, Zhang S, Bi Q, Wang Y. Identification of geometric errors of rotary axes on 5-axis machine tools by on-machine measurement[J]. The International Journal of Advanced Manufacturing Technology, 2016, 84(1-4): 505-512.
[10] Huang N, Bi Q, Wang Y*. Identification of two different geometric error definitions for the rotary axis of the 5-axis machine tools[J]. International Journal of Machine Tools and Manufacture, 2015, 91: 109-114.
[11] Huang N, Jin Y, Bi Q*, Wang Y. Integrated post-processor for 5-axis machine tools with geometric errors compensation[J]. International Journal of Machine Tools and Manufacture, 2015, 94: 65-73.
[12]Huang N, Bi Q, Wang Y*, Sun C. 5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement[J]. International Journal of Machine Tools and Manufacture, 2014, 84: 1-8.

软件版权登记及专利 *一种基于轮廓中轴线的型腔高效螺旋铣削刀具路径规划方法. 发明专利, 4.9
*House of quality for federated manufacturing APPs. 美国专利, USA1

学术兼职 International Journal of Machine Tools and Manufacture，Measurement，International Journal of Advanced Manufacturing Technology，IEEE Access等期刊审稿人

荣誉奖励 *2018.07 德国洪堡基金会洪堡****
*2018.03 上海交通大学优秀博士学位论文提名