周正干 ZHOU Zhenggan

出生年月
1967.05
籍贯
湖南

职称
教授
学历
研究生

电话
**
办公室


系别
机电工程系
职务

电子信箱
zzhenggan@buaa.edu.cn
传真


个人主页

◆学习经历

09/1983-07/1987哈尔滨工业大学机械工程系机械制造工艺及设备专业本科生
09/1987-01/1990哈尔滨工业大学机械工程系机械制造学科硕士研究生
01/1990-03/1993哈尔滨工业大学机械工程系机械制造学科博士研究生

◆工作经历

05/1993-05/1995北京航空航天大学制造工程系机械制造博士后流动站博士后
06/1995-04/1998北京航空航天大学制造工程系机电控制及自动化教研室，副教授
04/1998-06/2002北京航空航天大学机械工程及自动化学院，副教授
07/2002-今 北京航空航天大学机械工程及自动化学院，教授
其中：
04/1997-07/1997美国佛罗里达州立大学访问
11/1997-11/1998韩国高等技术研究院制造技术部访问研究员

◆研究领域

超声探测与成像，自动化检测技术与装置

◆荣誉及奖励

1992年获中国航天工业总公司科技进步二等奖

◆开授课程

本科生课程：测试技术基础
研究生课程：现代无损检测技术

◆教学及科研成果

近期从事的科研项目
1. 超声扫描轨迹生成方法研究及相控阵超声成像实验分析，工信部项目，2017-2020
2. 电能源安全性评估与故障无损检测技术，国家部委项目，2017-2020
3. 梯度材料增材制造阵列超声检测技术研究，国家部委项目，2017-2020
4. 固相焊接阵列超声检测技术研究，国家部委项目，2017-2020
5. 复杂型面扩散焊阵列超声检测技术研究，国家声学重点实验室基金项目，2018-2019
6. 钛合金增材制造整体叶轮盘的阵列超声检测技术研究，国家部委项目，2018-2021
7. 钛合金增材制造阵列超声检测技术研究，国家自然科学基金项目，2018-2021
8. 环形阵列超声检测技术及其在钛合金增材制造构件质量检测中的应用，商飞创新基金项目，2019-2020
9. 多界面粘接结构低频阵列超声检测技术，国家行业基金项目，2020-2021
10. 多界面粘接质量检测仿真技术，国家行业项目，2020-2021
近期发表的文章
1. 周正干, 孙广开. 先进超声检测技术的研究应用进展[J].机械工程学报, 2017,53(22):1-10.
2. 周正干, 李文涛, 李洋, 高翌飞. 相控阵超声水浸C扫描自动检测系统的研制[J].机械工程学报,2017,53(12):28-34.
3. 周正干, 李尚凝, 李洋. 相控阵超声检测方案设计关键技术及其在航空航天领域的应用[J]. 南京航空航天大学学报, 2017,49(04):461-467.
4. 周正干，李文涛. 航空航天领域中先进超声检测技术的发展和应用[J]. 航空制造技术，2018，61(19):34-44.
5. Kuanshuang Zhang, Zhenggan Zhou. Quantitative Characterization of Disbonds in Multilayered Bonded Composites Using Laser Ultrasonic Guided Waves[J]. NDT & E International, 2018, 97:42-45.
6. Zhenggan Zhou, Shangning Li, Yang Li, et al. Research on Total Focusing Method Based on Ultrasonic Annular Phased Array [C]. The 12th European Conference on Non-Destructive Testing, 2018.06.
7. Wentao Li, Zhenggan Zhou, Yang Li. Application of ultrasonic array method for the inspection of tc18 addictive manufacturing titanium alloy [J]. Sensors, 2019,19(20):4371.
8. Wentao Li, Zhenggan Zhou, Yang Li. Inspection of butt welds for complex surface parts using ultrasonic phased array [J]. Ultrasonics, 2019(96):75-82.
9. Yang Li, Zhenggan Zhou, Jun Wang. Analysis of linear non-destructive testing and evaluation methods for thin-walled structure inspection using ultrasonic array [J]. Coatings, 2019,62(14):28-39.
10. 李洋, 周正干. 基于全矩阵数据的阵列超声检测与评价技术研究和应用概述[J]. 航空制造技术, 2019,62(14):28-39.


◆学术与社会服务
中国机械工程学会无损检测分会副主任委员、中国声学学会检测声学分会委员


Curriculum Vitae (CV)

Prof. Dr. Zhenggan Zhou obtained his BSc and PhD in Mechanical Manufacturing at the Harbin Institute of Technology, Harbin, P. R. China in 1987 and 1992 respectively. He was promoted as an associate professor in 1995 and a full professor in 2002 at the Beihang University. Dr. Zhou now leads a team consisting of 4 Research fellows and 8 PhD students in the area of Ultrasonic Testing. He has obtained research funds from National Natural Science Foundation of China, Chinese government and industries. He maintains diverse and active research in the area of Ultrasonic C-Scan, Phased Array Ultrasonic Testing, Air-coupled Ultrasonic Testing, Laser Ultrasonic Testing, Infrared Thermal Wave Testing, Material Characterization with Ultrasonic, etc. He has been rewarded the Second Class Prize of Science and Technology Progress by Ministry of Astronautics, China in 1994. He has published over 150 papers in Chinese or English in the above areas. A list of key references is included at the bottom of the page. He is a Vice Chairman of the Chinese Society of Nondestructive Testing.
Selected publications:
1. Li, Honggang, Zhou Zhenggan. Air-coupled ultrasonic signal processing method for detection Stomata defects in materials. NDT & E INTERNATIONAL, 92:167-176, 2017.08.
2. Sun Guangkai, Qu Daoming, Zhou Zhou, Zhenggan. Detection of interfacial debonding in epoxy resin-bonded lead-steel structure using laser ultrasonics. MATERIALS TESTING, 59(9): 755-762, SEP 2017.
3. Li, Honggang, Zhou Zhenggan. Air-Coupled Ultrasonic Signal Processing Method for Detection of Lamination Defects in Molded Composites. JOURNAL OF NONDESTRUCTIVE EVALUATION, 36(3), SEP 2017.
4. Li, Honggang, Zhou Zhenggan. Application of P4 Polyphase codes pulse compression method to air-coupled ultrasonic testing systems. ULTRASONICS, 78:57-69, JUL 2017
5. Sun Guangkai, Zhou Zhenggan. Ultrasonic imaging of particle distribution in SiCp/Al composites. MATERIALS TESTING, 59(2):166-171, FEB 2017
6. Zhang Kuanshuang, Zhou Zhenggan, Ma Liyin. Research on a laser ultrasound method for testing the quality of a nuclear radiation protection structure. MEASUREMENT SCIENCE AND TECHNOLOGY, 28(2), FEB 2017
7. Zhang Kuanshuang, Zhou Zhenggan, Ma Liyin. Characterization of disbonds in a nuclear radiation protection structure using laser ultrasonics. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 31(11):1264-1278, 2017
8. Sun Guangkai, Zhou Zhenggan. Characterization of delaminations in composite laminates by laser ultrasonics. MATERIALS TESTING, 58(10):877-886, 2016
9. Sun Guangkai, Zhou Zhenggan. Non-contact detection of delamination in layered anisotropic composite materials with ultrasonic waves generated and detected by lasers. OPTIK, 127(16):6424-6433, 2016
10. Sun Guangkai, Zhou Zhenggan, Li Guangkai, Zhou Wenbin. Development of an optical fiber-guided robotic laser ultrasonic system for aeronautical composite structure testing. OPTIK, 127(12):5135-5140, 2016
11. Zhang Kuanshuang, Zhou Zhenggan, Zhou Jianghua, Sun Guangkai. Characteristics of laser ultrasound interaction with multi-layered dissimilar metals adhesive interface by numerical simulation. APPLIED SURFACE SCIENCE, 353:284-290, OCT 30 2015
12. Zhou Zhenggan, Zhang Kuanshuang, Zhou Jianghua, Sun Guangkai, Wang Jie. Application of laser ultrasonic technique for non-contact detection of structural surface-breaking cracks. OPTICS AND LASER TECHNOLOGY, 73:173-178, OCT 2015
13. Ma Baoquan, Zhou Zhenggan, Zhao Hanxue, Zhang Dongmei, Liu Weiping. Characterisation of inclusions and disbonds in honeycomb composites using non-contact non-destructive testing techniques. INSIGHT, 57(9):499-507, SEP 2015
14. Zhang Kuanshuang, Zhou Zhenggan, Zhou Jianghua. Application of laser ultrasonic method for on-line monitoring of friction stir spot welding process. APPLIED OPTICS, 54(25):7483-7489, SEP 1 2015
15. Zhou Zhenggan, Sun Guangkai, Chen Xiucheng, Wang Jie. Detection of drilling-induced delamination in aeronautical composites by noncontact laser ultrasonic method. APPLIED OPTICS, 53(12):2656-2663, APR 20 2014
16. Xu Na, Zhou Zhenggan. Numerical simulation and experiment for inspection of corner-shaped components using ultrasonic phased array. NDT & E INTERNATIONAL, 63:28-34, APR 2014
17. Zhou Zhenggan, Ma Baoquan, Jiang Jingtao, Yu Guang, Liu Kui, Zhang Dongmei, Liu Weiping. Application of wavelet filtering and Barker-coded pulse compression hybrid method to air-coupled ultrasonic testing. NONDESTRUCTIVE TESTING AND EVALUATION, 29(4):297-314, 2014
18. Sun Guangkai, Zhou Zhenggan. Application of laser ultrasonic technique for non-contact detection of drilling-induced delamination in aeronautical composite components. OPTIK, 125(14):3608-3611, 2014
19. Sun Guangkai, Zhou, Zhenggan, Chen Xiucheng, Wang Jie. Ultrasonic characterization of delamination in aeronautical composites using noncontact laser generation and detection. APPLIED OPTICS, 52(26):6481-6486, SEP 10 2013