Dinesh Bhatia 助理教授
航空学院 / 理工学院



联系方式 办公室
海洋楼205（左间）

校园
University of Nottingham Ningbo China

地址
199 Taikang East Road, Ningbo, 315100, China

电话
+86 574 8818 8735

邮箱
Dinesh.Bhatia@nottingham.edu.cn



学历
PhD- Kingston University London, U.K.
MSc- University of Brighton, U.K.
BEng- Pune University, India

个人简介
Dr Dinesh Bhatia is an Assistant Professor at the School of Aerospace Engineering at UNNC. His main area of research is Aerodynamics with special emphasis on drag reduction and flow control. His research includes the study of biomimetic inspired novel surface features to delay boundary layer transition and reduce drag. Currently, he is undertaking research on surface coatings to reduce drag.
Prior to his joining UNNC, Dr Bhatia worked at the Military Technological College, Oman as a Lecturer in Aeronautical Engineering. He also worked as a Marie Curie Research Fellow in Aerodynamics and as a Design Engineer in Motorsports.
Outside of work, he is very passionate about the environment and likes to participate in causes that assist the sustainable development of our planet.


教学
Aerospace Aerodynamics


发表文章
D. Bhatia, G.J. Yang, J. Sun, J. Wang, Effect of Leading Edge Geometry on Boundary Layer Transition-An Experimental Approach, Appl. Mech. Mater. 590 (2014) 53–57. doi:10.4028/www.scientific.net/AMM.590.53.
D. Bhatia, G. Yang, J. Sun, J. Wang, P. Barrington, H. Li, Effects of Different Geometries of leading edge on Boundary Layer Transition, in: 54th AIAA Aerosp. Sci. Meet., American Institute of Aeronautics and Astronautics, Reston, Virginia, 2016. doi:10.2514/6.2016-1549.
G. Li, D.Bhatia, X. Min, J. Wang, Grid convergence analysis for MUSCL-based numerical scheme in shockwave-containing flows – 1^stInt PMAE Conf, Hong Kong, 2018