周进雄，教授，博士生导师，教育部新世纪优秀人才，哈佛大学访问****
Prof. Jinxiong Zhou, Phd., Supervisor of Phd student; Recipient of New Century Talents, MOE(2006); Visiting Schoar of Harvard University (2006.11-2007.11)
教育经历
l 西北工业大学飞机系飞行器结构强度专业本科生(1990.9-1994.7)
l 西北工业大学飞机系固体力学专业硕士研究生(1994.9-1995.9)
l 西北工业大学飞机系固体力学专业博士研究生(1995.9-1998.10)
工作经历
l中国铁道科学研究院铁道
l 西安交通大学建筑工程与力学学院理论力学教研室讲师(2000.12-2001.5)
l 西安交通大学建筑工程与力学学院理论力学教研室副教授(2001.6-2002.12)
l 西安交通大学建筑工程与力学学院理论力学教研室主任、副教授(2003.1-2005.6)
l 西安交通大学航天航空学院航天航空系副主任、副教授(2005.7 -2006.11)
l 哈佛大学工程与应用科学学院(Harvard School of Engineering and Applied Sciences)访问****(2006.11-2007.11，合作者美国工程院院士锁志刚(Z. Suo)教授)
l 西安交通大学航天航空学院航天航空系副主任、教授(2007.7-2008.3)
l 西安交通大学航天航空学院空天工程系系主任、教授、博士生导师(2008.4-2012.2)
l 香港大学机械工程系访问教授(2009.1-2009.3)
l 西安交通大学航天航空学院航空工程系教授、博士生导师(2012.3-至今)
荣誉称号
2004年西安交通大学能源与动力工程学院优秀基础课教师奖
2006年霍英东教育基金会第十届高等院校青年教师奖(三等奖,编号103122)
2006年入选"教育部新世纪优秀人才支持计划"(NCET-06-0850)
2007年入选西安交通大学首届"青年教师培养计划"
2017年被聘为振动工程学报编委
联系方式
Email:jxzhouxx@mail.xjtu.edu.cn;
办公室：教一楼北425室
QQ: (拉球初****)，微信：Jinxiong_Zhou，拉球初****。
个人简介(BIO of PI) - 周 进雄基本信息
周进雄，教授，博士生导师，教育部新世纪优秀人才，哈佛大学访问****
Prof. Jinxiong Zhou, Phd., Supervisor of Phd student; Recipient of New Century Talents, MOE(2006); Visiting Schoar of Harvard University (2006.11-2007.11)
教育经历
l 西北工业大学飞机系飞行器结构强度专业本科生(1990.9-1994.7)
l 西北工业大学飞机系固体力学专业硕士研究生(1994.9-1995.9)
l 西北工业大学飞机系固体力学专业博士研究生(1995.9-1998.10)
工作经历
l中国铁道科学研究院铁道
l 西安交通大学建筑工程与力学学院理论力学教研室讲师(2000.12-2001.5)
l 西安交通大学建筑工程与力学学院理论力学教研室副教授(2001.6-2002.12)
l 西安交通大学建筑工程与力学学院理论力学教研室主任、副教授(2003.1-2005.6)
l 西安交通大学航天航空学院航天航空系副主任、副教授(2005.7 -2006.11)
l 哈佛大学工程与应用科学学院(Harvard School of Engineering and Applied Sciences)访问****(2006.11-2007.11，合作者美国工程院院士锁志刚(Z. Suo)教授)
l 西安交通大学航天航空学院航天航空系副主任、教授(2007.7-2008.3)
l 西安交通大学航天航空学院空天工程系系主任、教授、博士生导师(2008.4-2012.2)
l 香港大学机械工程系访问教授(2009.1-2009.3)
l 西安交通大学航天航空学院航空工程系教授、博士生导师(2012.3-至今)
荣誉称号
2004年西安交通大学能源与动力工程学院优秀基础课教师奖
2006年霍英东教育基金会第十届高等院校青年教师奖(三等奖,编号103122)
2006年入选"教育部新世纪优秀人才支持计划"(NCET-06-0850)
2007年入选西安交通大学首届"青年教师培养计划"
2017年被聘为振动工程学报编委
联系方式
Email:jxzhouxx@mail.xjtu.edu.cn;
办公室：教一楼北425室
QQ: (拉球初****)，微信：Jinxiong_Zhou，拉球初****。
论文著作(Publications) - 周 进雄List of publications
Book Chapters
1. 周进雄，张陵译，机构动态仿真－使用MATLAB和Simulink (译著)，西安交通大学出版社出版，西安，2002年9月.
2. 陈花玲，周进雄著，介电弹性体智能材料力电耦合性能及其应用，科学出版社，北京，书号：ISBN978-7-03-053004-2，2017年6月。
Journal Papers and citations
ReseacherID on Publons:https://publons.com/researcher/**/jinxiong-zhou/
Google Scholar citations (total citations over 5500): https://scholar.google.com/citations?user=tKs00U0AAAAJ&hl=en
ORCID:http://orcid.org/0000-0001-8453-7443
教学工作
1. 周进雄，研究生课程：有限元方法与软件应用(063014，航天学院)，讲授ABAQUS，ANSYS，固体力学模拟高级技术，流固耦合，欢迎选课！
2. 周进雄，飞行器结构动力学，本科生专业基础课，全英文讲授！
The full text of the published journal papers can be found via my researchgate homgepage :https://www.researchgate.net/profile/Jinxiong_Zhou/contributions
***2020***
96. W. Guan, L. Dong and J. Zhou, Compressed sensing based on dictionary learning for underdetermined modal identification, Int. J. Appl. Electromag. Mech. 64, 129-
136, 2020.
95. Y. Wang, L. Zhang and J. Zhou*, Incremental harmonic balance method for periodic forced oscillation of a dielectic elastomer balloon, Appl. Math. Mech. 41, 459-470,
2020.
94. Y. Wang, G. Sun, J. Yang, L. Zhang and J. Zhou*, A soft sandwich structure enables voltage-induced actuation of liquid metal embedded elastomers, AIP Adv. 10,
015016, 2020.
93. Y. Ma, X. Zhao, X. Ye, N. Jiang and J. Zhou*, A transient fluid-structure interaction analysis strategy and validation of a pressurized reactor with regard to loss-of-
coolant accidents, Nuclear Science and Techniques 31, 1-11, 2020.
92. N. An, M. Li* and J. Zhou, Modeling SMA-enabled soft deployable structures for kirigami/origami reflectors, Int. J. Mech. Sci. 180, 105753, 2020.
91. L. Zhang, Y. Xiang, H. Zhang, L. Cheng, X. Mao, N. An, L. Zhang, J. Zhou, L. Deng, Y. Zhang*, X. Sun*, H. A. Santos* and W. Cui*, A biomimetic 3D-self-forming
approach for microvascular scaffolds, Adv. Sci. 7, **, 2020
90. N. An#, A. G. Domel#, J. Zhou, A. Rafsanjani* and K. Bertoldi*, Programmable hierarchical kirigami, Adv. Func. Mater. 30, **, 2020.
***2019***
89. S. Sun, N. An, G. Wang, M. Li* and J. Zhou, Snap-back induced hysteresis in an elastic mechanical metamaterial under tension, Appl. Phys. Lett. 115, 091901, 2019
88. H. Sheng, X. Wang, N. Kong, W. Xi, H. Yang, X. Wu, K. Wu, C. Li, J. Hu, J. Tang, J. Zhou, S. Duan, H. Wang* and Z. Suo*, Neural interfaces by hydrogels, Extreme Mechanics Lett. 30, 100510, 2019.
87. G. Wang, M. Li * and J. Zhou, Modeling soft machines driven by buckling actuators, Int. J. Mech. Sci. 157-158, 662-667, 2019.
86. W. Guan, L. Dong*, J. Zhou, Y. Han and J. Zhou, Data-driven methods for operational modal parameters identification: A comparison and application, Measurement 132, 238-251, 2019.
85. G. Wang, S. Sun, M. Li* and J. Zhou, Large deformation shape optimization of cut-mediated soft mechanical metamaterials, Mater. Res. Express 6, 055802, 2019.
***2018***
84. W. Zhang, G. Huang*, K. Ng, Y. Ji, B. Gao, L. Huang, J. Zhou, T. Lu and F. Xu, Engineering ellipsoidal cap-like hydrogel particles as building blocks or sacrificial templates for three-dimensional cell culture, Biomater. Sci. 6, 885-892, 2018.
83. N. An M. Li and J. Zhou*, Modeling and understanding of locomotion of pneumatic soft robotics, Soft Materials 16, 151-159, 2018.
82. M. Li, Z. Jiang, N. An and J. Zhou*, Harnessing programmed holes in hydrogel bilayers to design soft self-folding machines, Int. J. Mech. Sci. 140, 271-278, 2018.
81. F. Liu and J. Zhou*, Shooting and arc-length continuation method for periodic solution and bifurcation of nonlinear oscillation of viscoelastic dielectric elastomers, Trans. ASME J. Appl. Mech. 85, 011005, 2018.
80. F. Liu, W. Sun, X. Zhao, C. Li and J. Zhou*, Method towards optimal design of dielectric elastomer actuated soft machines, Science China Technological Sciences 61, 959-964, 2018.
***2017***
79. W. Sun, F. Liu, Z. Ma, C. Li and J. Zhou*, Soft electroactive actuators and hard ratchet-wheels enable unidirectional locomotion of hybrid machine, AIP Adv. 7, 015308, 2017.
78. 马梓淇, 张宏亮, 何培峰, 许斌, 罗英, 周进雄*， 瞬态承压热冲击下AP1000反应堆压力容器热应力数值模拟，中国科学:技术科学 47, 685-691, 2017.
77. 余豪, 何培峰, 许斌, 罗英, 马梓淇, 周进雄*，反应堆控制棒驱动结构温度场数值模拟，中国科学:技术科学 47, 1225-1232, 2017.
***2016***
76. N. An, M. Li* and J. Zhou, Predicting origami-inspired programmable self-folding of hydrogel trilayers, Smart Mater. Struct. 25, 11LT02, 2016.
75. W. Sun, F. Liu, Z. Ma, C. Li and J. Zhou*, Soft mobile robots driven by foldable dielectric elastomer actuators, J. Appl. Phys. 120, 084901, 2016.
74. G. Wang, M. Li* and J. Zhou, Switching of deformation modes in soft mechanical metamaterials, Soft Materials 14, 180-186, 2016.
73. C. Yang, B. Chen, J. Zhou, Y. Chen and Z. Suo*, Electroluminescence of giant stretchability, Adv. Mater. 28, 4480-4484, 2016.
72. F. Liu, Y. Zhang, L. Zhang, L. Geng, Y. Wang, N. Ni and J. Zhou*, Analysis, experiment and correlation of a petal-shaped actuator based on dielectric elastomer minimum energy structures, Appl. Phys. A 122, 323, 2016.
71. X. Liu, B. Li*, H. Chen, S. Jia and J. Zhou, Voltage-induced wrinkling behavior of dielectric elastomer, J. Appl. Polym. Sci. 133, 43258, 2016
70. N. An, M. Li* and J. Zhou, Instability of liquid crystal elastomers, Smart Mater. Struct. 25, 015016, 2016
***2015***
69. Y. Liao, N. An, N. Wang, Y. Zhang, J. Song, J. Zhou and W. Liu*, Photoactive self-shaping hydrogels as noncontact 3D Macro/Microscopic photoprinting platforms, Macromol. Rapid Commun. 36, 2129-2136, 2015.
68. W. Zhen, J. Gao, Z. Wei, J. Zhou and Y. Chen*, Facile fabrication of self-healing carboxymethyl cellulose hydrogels, Euro. Poly. J. 72, 514-522, 2015.
67. H. Haider, C. Yang, W. Zheng, J. Yang, M. Wang, S. Yang, M. Zrinyi, Y. Osada, Z. Suo, Q. Zhang, J. Zhou* and Y. Chen*, Exceptionally tough and notch-insensitive magnetic hydrogels, Soft Matter 11, 8253-8261, 2015.
66. W. Sun, H. Wang and J. Zhou*, Actuation and instability of inter-connected dielectric elastomer balloons, Appl. Phys. A 119, 443-449, 2015.
65. C. Yang, B. Chen, J. Lu, J. Yang, J. Zhou, Y. Chen* and Z. Suo*, Ionic cable, Extreme Mechanics Lett. 3, 59-65, 2015.
64. M. Wang, C. Yang, Z. Liu, J. Zhou, F. Xu, Z. Suo, J. Yang* and Y. Chen*, Tough photoluminescent hydrogels doped with lanthanide, Macromol. Rapid Commun. 36, 465-471, 2015.
63. W. Zheng, N. An, J. Yang, J. Zhou* and Y. Chen*, Tough Al-alginate/PNIPAM hydrogels with tunable LCST for soft robotics, ACS Appl. Mater. Interfaces 7, 1758-1764, 2015.
62. Z. Wei, J. Yang, Z. Liu, F. Xu, J. Zhou, M. Zrinyi, Y. Osada and Y. Chen*, Novel biocompatible polysaccharide-based Self-healing hydrogel, Adv. Func. Mater. 25, 1352-1359, 2015.
61. S. Liu, P. Wang, H. Guo, L. Wang, J. Zhou, T. Lu, F. Xu and M. Lin, Reaction-induced swelling of ionic gels, Soft Matter 11, 449-455, 2015.
60. 陈宝鸿，周进雄*，离子导体驱动的介电弹性体软机器研究进展，固体力学学报 36, 481-492, 2015.
***2014***
59. B. Chen, J. Lu, C. Yang, J. Yang, J. Zhou, Y. Chen* and Z. Suo*, Highly stretchable and transparent hydrogels as nonvolatile conductors for dielectric elastomer transducers, ACS Appl. Mater. Interfaces 6, 7840-7845, 2014.
58. Z. Wei, J. Yang, J. Zhou, F. Xu, M. Zrinyi, P. H. Dussault, Y. Osada and Y. Chen*, Self-healing gels based on constitutional dynamic chemistry and their potential applications, Chem. Soc. Rev. 43, 8114-8131, 2014.
57. Y. Wang, B. Chen, Y. Bai, H. Wang and J. Zhou*, Actuating dielectric elastomers in pure shear deformation by elastomeric conductors, Appl. Phys. Lett. 104, 064101, 2014.
56. Y. Bai, Y. Jiang, B. Chen, C. Foo, Y. Zhou, F. Xiang, J. Zhou, H. Wang* and Z. Suo*, Cyclic performance of viscoelastic dielectric elastomers with solid hydrogel electrodes, Appl. Phys. Lett. 104, 062902, 2014.
55. Y. Bai, B. Chen, F. Xiang, J. Zhou, H. Wang* and Z. Suo*, Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt, Appl. Phys. Lett. 105, 151903, 2014.
54. M. Li, S. Lv and J. Zhou*, Photo-thermo-mechanically actuated bending and snapping kinetics of liquid crystal elastomer cantilever, Smart Mater. Struct. 23, 125012，2014.
53. Y. Wang, J. Zhou*, W. Sun, X. Wu and L. Zhang, Mechanics of dielectric elastomer activated deformable transmission grating, Smart Mater. Struct. 23, 095010, 2014.
52. B. Chen, Y. Bai, F. Xiang, J. Sun, Y. Chen, H. Wang*, J. Zhou* and Z. Suo, Stretchable and transparent hydrogels as soft conductors for dielectric elastomer actuators, J. Polymer Science Part B: Polymer Physics 52, 1055-1060, 2014.
51. X. Jia, M. Li and J. Zhou*, Modeling contacts of ionic polymer metal composites based tactile sensors, Acta Mechanica Solida Sinica 27, 407-411, 2014.
50. M. Li, J. Geng and J. Zhou*, Constrained swelling and instability of a temperature-sensitive hydrogel ring, e-Polymers 14, 103-106, 2014.
49. N. Ni, L. Zhang*, J. Zhou, Y. Wang and F. Liu, Dielectric elastomer cantilever beam sensor, Proc. of SPIE 9056, 90561M, 2014.
48. Y. Wang, J. Zhou*, X. Wu, L. Zhang, N. Ni and F. Liu, Inhomogeneous deformation of circular dielectric elastomer: simulation and experiment, Proc. of SPIE 9056, 90562Z, 2014.
***2013***
47. 王鹏飞，刘少宝，周进雄，卢天健，徐峰，自振荡凝胶的动力学模型及可控性分析，力学学报 45, 888-896, 2013.
46. C. Yang, M. Wang, H. Haider, J. Yang, J. Sun, Y. Chen*, J. Zhou*, Z. Suo, Strengthening alginate/polyacrylamide hydrogels using various multivalent cations, ACS Appl. Mater. Interfaces 5, 10418-10422, 2013.
45. W. Guo, M. Li, J. Zhou*, Modeling programmable deformation of self-folding all-polymer structures with temperature-sensitive hydrogels, Smart Mater. Struct. 22, 115028, 2013.
44. B. Li, H. Chen*, J. Zhou, Electromechanical stability of dielectric elastomer composites with enhanced permittivity, Composites Part A 52, 55-61, 2013.
43. P. Wang*, S. Liu, J. Zhou*, F. Xu and T. Lu*, Kinetic Modelling and Bifurcation Analysis of Chemomechanically Responsive Gels under Mechanical Load, Eur. Phys. J. E-Soft Matter and Biological Physics 36, 108, 2013.
42. M. Li, C. Jin and J. Zhou*, Finite element implementation of poroelasticity theory for swelling dynamics of hydrogels, Theor. Appl. Mech. Lett. 3, 054009, 2013.
41. Y. Wang, J. Zhou*, X. Wu, B. Li, L. Zhang, Energy diagrams of dielectric elastomer generators under different types of deformation, Chin. Phys. Lett. 30, 066103, 2013.
40. B. Li, H. Chen*, J. Qiang, J. Sheng and J. Zhou, Effect of viscoelastic relaxation on the electromechanical coupling of dielectric elastomer, Proc. Of SPIE 8687, 86872T, 2013.
39. M. Ren, J. Huang, H. Cai, J. M. Tsai, J. Zhou, Z. Liu, Z. Suo*, A. Liu*, Nano-opto-mechanical actuator and pull-back instability, ACS Nano 7, 1676-1681, 2013.
38. B. Li, J. Zhou, H. Chen*, Modeling of the muscle-like actuation in soft dielectrics: deformation mode and electromechanical instability, Appl. Phys. A 110, 59-63, 2013.
***2012***
37. Z. Xiao, M. Li and J. Zhou, Surface instability of a swollen cylinder hydrogel, Acta Mechanica Solida Sinica, 25(2012), 550-556.
36. G. Huang, X. Zhang, Z. Xiao, Q. Zhang, J. Zhou, F. Xu and T. Lu, Cell-encapsulating microfluidic hydrogels with enhanced mechanical stability, Soft Matter, 8(2012), 10678-10694.
35. H. Park, Z. Suo, J. Zhou and P. Klein, A dynamic finite element method for inhomogeneous deformation and electromechanical instability of dielectric elastomer transducers, Int. J. Solids Struct., 49(2012), 2187-2194.
34. T. He, M. Li and J. Zhou, Modeling deformation and contacts of pH sensitive hydrogels for microfluidic flow control, Soft Matter, 8(2012), 3083-3089.
33. J. Geng, M. Li and J. Zhou, An extended stress-diffusion coupling model for swelling dynamics of polymer gels, Ind. Eng. Chem. Res., 51(2012), 3466-3471.
32. Z. Zhu, H. Li, H. Chen and J. Zhou, Synthesis, experimental characterization and parametric identification of ionic-polymer metal composite bending actuators, Int. J. Comput. Mater. Sci. Eng., 1(2012), **.
31. X. Wu, W. Sun, B. Li, H. Chen and J. Zhou, Homogeneous large deformation analysis of a dielectric elastomer peristaltic actuator, Science China Technological Sciences, 55(2012), 537-541.
30. B. Li, H. Chen, J. Qiang and J. Zhou, A model for conditional polarization of the actuation enhancement of a dielectric elastomer, Soft Matter, 8(2012), 311-317.
***2011***
29. B. Li, J. Zhou, H. Chen, Electromechanical stability in charge-controlled dielectric elastomer actuation, Appl. Phys. Lett., 99(2011), 244101.
28. B. Li, H. Chen, J. Zhou, Z. Zhu and Y. Wang, Polarization-modified instability and actuation transition of deformable dielectric, Europhys. Lett., 95(2011), 37006.
27. S. J. Adrian Soh, T. Li, J. Zhou, X. Zhao, H. Wei, J. Zhu and Z. Suo, Mechanisms of large actuation strain in dielectric elastomers, J. Polymer Science Part B: Polymer Physics, 49(2011), 504-515.
26. H. Li, J. Zhou and M. Li, Multiphysics modeling of self-oscillations of polyelectrolyte gel actuators, Int. J. Appl. Mech.,3(2011), 355-363.
25. T. Li, C. Chen and J. Zhou, Three dimensional phase field study on the thickness effect of ferroelectric polymer thin film, Theor. Appl. Mech. Lett., 1(2011), 011008.
***2010***
24. P. Wang, J. Zhou, M. Li, F. Xu, T. J. Lu, Nonlinear dynamics of self-oscillating polymer gels, Science China Technological Science, Vol.53, No.7, 2010, 1862-1868.
23. J. Zhou, G. Huang, M. Li and A. K. Soh, Stress evolution in a phase separating polymeric gel, Model. Simul. Mater. Sci. Eng., Vol.18, No.2, 2010, 025002.
***Before 2010
22. M. Li and J. Zhou, Simulating surface-mediated self assembly patterns by a stabilized Fourier spectral method, Mater. Trans., Vol.49, No.9, 2008, 2028-2032.
21. W. Hong, X. Zhao, J. Zhou and Z. Suo, A theory of coupled diffusion and large deformation in polymeric gels, J. Mech. Phys. Solids, Vol.56, No. 5, 2008, 1779-1793.
20. Z. Suo, X. Zhao, W. Hong, J. Zhou and W. H. Greene, A theory of large deformation in soft active materials, Proc. of SPIE 6927(2008), 692710.
19. J. Zhou, W. Hong, X. Zhao, Z. Zhang and Z. Suo, Propagation of instability in dielectric elastomers, Int. J. Solids Struct., Vol. 45, No. 13, 2008, 3739-3750.
18. J. Zhou, and W. Zou, Meshless approximation combined with implicit topology description for optimization of continua, Struct. Multidisc. Optim., Vol. 36, No. 4, 2008, 347-353.
17. W. Zou, J. Zhou, N. Zhou, X. M. Wang and L. Zhang, A truly meshless method based on partition of unity for shape optimization of continua, Comput. Mech., Vol.39, No.4, 2007, 357-365.
16. J. Zhou, M. E Li, Z. Q. Zhang and W. Zou, A subdomain collocation method based on Voronoi domain partition and reproducing kernel approximation, Comput. Methods Appl. Mech. Engrg., Vol.196, No.13-16, 2007, 1958-1967.
15. J. Zhou, and M. E Li, Solving phase field equations using a meshless method, Commun. Numer. Meth. Engrg., Vol.22, No.11, 2006, 1109-1115.
14. J. Zhou, X. M. Wang, Z. Q. Zhang and L. Zhang, On the enhancement of computation and exploration of discretization approaches for meshless shape design sensitivity analysis, Struct. Multidisc. Optim., Vol.31, No.2, 2006, 96-104.
13. Z. Q. Zhang, J. Zhou, N. Zhou, X. M. Wang and L. Zhang, Shape optimization using reproducing kernel particle method and an enriched genetic algorithm, Comput. Methods Appl. Mech. Engrg., Vol. 194, No.39-41, 2005, 4048-4070.
12. Z. Q. Zhang, J. Zhou, X. M. Wang, Y. F. Zhang and L. Zhang, h-adaptivity analysis based on multiple scale reproducing kernel particle method, Applied Mathematics and Mechanics (English Edition), Vol.26, No.8, 2005, 1064-1071.
11. J. Zhou, X. M. Wang, Z. Q. Zhang and L. Zhang, Explicit 3-D RKPM shape functions in terms of kernel function moments for accelerated computation, Comput. Methods Appl. Mech. Engrg., Vol.194, No.9-11, 2005, 1027-1035.
10. J. Zhou, H. Y. Zhang, L. Zhang, Reproducing Kernel Particle Method for free and forced vibration analysis, Journal of Sound and Vibration, Vol.279, No.1-2, 2005, 389-402.
9. J. Zhou, L. Zhang, Incremental Harmonic Balance method for predicting amplitudes of a multi-DOF nonlinear wheel shimmy system with combined Coulomb and quadratic damping, Journal of Sound and Vibration, Vol.279, No.1-2, 2005, 403-416.
8. J. Zhou, X. M. Wang, Z. Q. Zhang and L. Zhang, On some enrichments of Reproducing Kernel Particle Method, Int. J. Comput. Methods., Vol.1, No.3, 2004, 519-533.
7. Z. Q. Zhang, J. Zhou, X. M. Wang, Y. F. Zhang and L. Zhang, Investigations on Reproducing Kernel Particle Method Enriched by Partition of Unity and Visibility Criterion, Comput. Mech., Vol.34, No.4, 2004, 310-329.
6. J. Zhou, N. Zhou, L. Zhang, Q. W. Lv and Y. J. Li, Thermal deformation analysis of the shadow mask and prediction of beam landing shifts for CRT using finite element method, Advances in Engineering Software, Vol.35, No.8-9, 2004, 503-509.
5. H. Y. Guo, L. Zhang, L. L. Zhang and J. Zhou, Optimal placement of sensors for structural health monitoring using improved genetic algorithms, Smart Materials and Struct., Vol.13, No.3, 2004, 528-534.
4. Q. Sun, L. Zhang, J. Zhou and Q. X. Shi, Experimental study of the semi-active control of building structures using the shaking table, Earthquake Engng. Struct. Dyn., Vol.32, 2003, 2353-2376.
3. J. Zhou, J. B. Wen, H. Y. Zhang and L. Zhang, A nodal integration and post-processing technique based on Voronoi diagram for Galerkin meshless methods, Comput. Methods Appl. Mech. Engrg., Vol.192, No. 35-36, 2003, 3831-3843.
2. Q. Sun, J. Zhou and L. Zhang, An adaptive beam model and dynamic characteristics of magnetorheological materials, Journal of Sound and Vibration Vol.261, No.3, 2003, 465-481.
1. J. Zhou and D. Zhu, Parametric shimmy analysis, Chinese Journal of Aeronautics, 11(1998), 185-191.
科学研究(Research) - 周 进雄科研项目
没有找到条目。
项目编号项目名称项目来源起讫时间承担角色项目类别
JM- 缠绕肋仿真设计及结构优化 横向课题 2021-01~2021-12 负责人 横向项目
** 机器学习XXX预测 其他 2021-01~2021-12 负责人 纵向项目
** 翼型上软材料主动变形表面失稳形貌调控及其流固耦合减阻机理 国家自然科学基金项目 2020-1~ 负责人 纵向项目
J 动态载荷下黄热装置管束结构的流固耦合特性研究 横向课题 2020-01~2020-12 负责人 横向项目
** 柔性超结构隔振技术开发 企业横向课题 2019-9~ 负责人 横向项目
J 多物理场多变量反应堆动力学分析方法研究 企业横向课题 2019-6~ 负责人 横向项目
** 可展开式构架天线驱动装置研制测试 企业横向课题 2019-6~ 负责人 横向项目
** 轻质XXX研究 其他 2019-3~ 负责人 纵向项目
6142A** 反应堆控制棒驱动线落棒可靠性分析 企业横向课题 2019-1~ 负责人 横向项目
J** 基于能量禁带的多孔弹性体结构设计在振动控制中的应用 企业横向课题 2018-1~ 负责人 横向项目
** 750KV酒杯型复合材料杆塔应用研究——结构有限元仿真分析 企业横向课题 2016-2~ 负责人 横向项目
123456 集成式堆顶结构可压缩气体流场分析 企业横向课题 2015-5~ 负责人 横向项目
** 柔性离子液体凝胶驱动的介电弹性体高频振荡器力电耦合行为 国家自然科学基金项目 2015-1~ 负责人 纵向项目
** 轻质非均匀介质的力学行为 国家自然科学基金项目 2014-1~ 骨干成员 纵向项目
** 非均质高强水凝胶非均匀溶胀诱发失稳斑图调控的实验和数值模拟 国家自然科学基金项目 2014-1~ 骨干成员 纵向项目
123456 结构分析与优化设计 企业横向课题 2014-10~ 负责人 横向项目
金属多孔材料力学性能的有限元模拟 企业横向课题 2012-1~ 负责人 横向项目
123456 承载能力试验 企业横向课题 2011-1~ 负责人 横向项目
** 介电弹性体俘能器力电耦合及能量转化机理的基础研究 国家自然科学基金项目 2011-1~ 骨干成员 纵向项目
** 轻质非均匀介质的力学行为 国家自然科学基金项目 2011-1~ 骨干成员 纵向项目
20条目每页4每个页面的条目数
8每个页面的条目数
20每个页面的条目数
40每个页面的条目数
60每个页面的条目数
显示29结果中的1-20。
上一页面
页面1
页面2
下一页
研究领域
周进雄教授设计与仿真小组简介(Introduction to Zhou's Design and Simulation Group)
研究方向(Research Interests):
(1)先进飞行器设计与优化(Design and optimization of advanced spacecrafts):研究飞行器设计中的流固耦合问题，结构综合设计与优化，飞行器结构强度与振动，柔性减阻表面与减阻设计(Fluid-structure interaction in aircrafts; Design and optimization of aircraft structures; Strength and vibration of aircraft structures; Drag-reduction in flexible surfaces);
(2)基于人工智能的新型计算方法及其工程应用(Artificial intelligence based numerical methods and applications):有限元与机器学习的结合，数据驱动的新型数值方法及其应用，基于机器学习的流固耦合问题数值方法，增材制造过程数值模拟(Machine learning integrated with FEM; dada-driven numerical methods with applications; machine-learning based methods for fluid-structure interactions; modeling of additive manufacturing);
(3)空间可展开结构设计与仿真(Design and modeling of aerospace deployable structures):
研究缠绕肋天线结构设计与仿真，空间可展开结构的设计与仿真，力学超材料及其在空间结构中的应用(Design and simulation of wrap-rib antenna structures; Design and modeling of space deployable structures; mechanical metamaterials with application in aerospace structures);
(4)核反应堆结构力学(Structural mechanics of nuclear reactors):
研究核反应堆流固耦合与流致振动，反应堆结构疲劳、断裂与可靠性分析，核电装备结构动力学，核结构材料力学行为数值模拟(Fluid-structure interaction and flow-induced vibration; Fatigue, fracture and reliability analysis of reactor components; Structural dynamics of nuclear power plants; Modeling mechanical behavior of structural materials of reactors);
(5)力学超材料设计与工程应用(Design and applications of mechanical metamaterials):
研究基于增材制造的金属构筑材料设计与力学行为，力学超材料的设计，力学超材料的逆向设计，力学超材料的工程应用(Design and mechanical behaviors of architectured materials; Design of mechanical metamaterials; Inverse design of mechanical metamaterials; Enginnering applications of mechanical metamaterials);
研究特色(Expertise)：强调熟练掌握、应用并开发从事各种结构(航空航天、机械、电子、车辆、核工程)设计、分析、优化工作必不可少的各种CAD和CAE软件，来解决重要的工程实际问题和新奇的学科前沿问题，努力做到学术前沿和工程实际问题的兼顾与互补。(A variety of CAD and CAE commercial softwares are intensively used in our lab to solve diverse engineering and academic problems, which are essential prerequisites for design, analysis and optimization of various structures including aerospace, mechanical, electronic, cars and nuclear reactors.)
研究基础(Achievement)：主持和参加国家自然科学基金项目8项，主持省部级和航空航天企业横向课题20余项。在Adv. Mater.，Adv. Func. Mater.，Soft Matter，ACS Appl. Mater. Interfaces，Appl. Phys. Lett.，J. Mech. Phys. Solids等顶尖材料、软物质、物理及力学类国际期刊发表SCI收录论文100多篇，其中影响因子大于10的论文4篇，影响因子大于3的论文15篇，ESI高被引论文2篇，论文总引用5000次，SCI他引3000多次。(Prof. Zhou is the PIs of 4 NSFC grants and PIs of more than 20 engineering and provincial projects. He has authored more than 100 international journal papers, including some high-profile journal papers. Four papers with impact factors greater than 10 and more than 15 papers with impact factors greater than 3. Total citation of Prof. Zhou is more than 5000 times, and total SCI citations are more than 3000 times. )
交流与合作(International Collaboration)：课题组和哈佛大学等国际顶尖研究小组保持密切的学术交流和科研合作，课题组承担多项企业横向课题，与中航工业、航天科技、中核集团等下属的重点科研院所有广泛而密切的科研合作，同时和校内核能、机械等学科有广泛深入的科研合作，鼓励研究生从事力学、核工程、机械等多学科交叉前沿课题的探索。近年来研究生中有多人到Harvard，Geogia Tech.，UT Austin，Southern California等著名高校交流访问和攻读学位。(We have strong collaborations with some of active leading rearch groups in the world such as Harvard University. We also have multidisciplinary collaborations with professors at XJTU with professors work on nuclear engineering and mechanical engineering. Several students won full scholarship and pursue Phd degree at Harvard, Southern California etc. Some of them studied at Geogia Tech., UT Austin, etc., as visiting students.)课题组已累计有四名同学到哈佛大学攻读博士学位、从事博士后研究或联合培养！
软件工具(Softwares and facilities)：MSC/NASTRAN，MARC，ABAQUS、ANSYS有限元软件，ANSYS/CFX，FLUENT流体计算软件，COMSOL多物理场模拟软件，ADAMS、RecurDyn多刚体动力学仿真软件，Isight、Hyperworks结构优化设计软件及Hypermesh前处理软件，Solidworks、ProE、Inventor及Catia等CAD软件等。学生同时能有机会学习和熟练掌握各种程序设计语言 Python，C++, MATLAB, FORTRAN等，接触和学习最新的人工智能和机器学习算法和软件及其在结构分析和优化中的应用。(We intensively use various popular CAD and CAE softwares. Many user-subroutines have been developed and incorporated into commercial softwares. Lots of examples for academic and engineering problems have been accumulated in our group for the beginners to initiate their learning. Students also have opportunities to receive well-training on programming using popular computer languages such as Python, C++, MATLAB and FORTRAN. We also have interests in applying machine learning algorithms to solve structural analysis and optimization problems. We also jointly get involved into soft machines lab, which allows us to do some experiments.)
学生就业(Career Development of Alumi)：由于课题组学生能熟练掌握CAE软件并具有很强的计算分析能力，同时课题组与众多重点科研院所和企业有密切的科研协作，学生就业好！近几年毕业的研究生有8人获得国家奖学金(耿嘉嵩，2013届硕士；郭为，2014届硕士；江衍辉， 2015届硕士；王垠，2015届博士；潘飞，2016届硕士；杨灿辉，2017届博士生；陈宝鸿，2016届硕士生；孙文杰，2016届博士生)，主要分配至航空航天、兵器、电子、核能等大型国有企业和研究所工作，如航天一院、航天二院、 航天五院、航天五院504所、航天六院11所，中国工程物理研究院，中国核动力研究院，航天九院、空空导弹研究院、中航光电、中电28所、中国商发、中科院小卫星中心、东方电气、兵器203所、中航强度所、中航一飞院、博世汽车电子等，同时还有学生在新加坡IHPC、南方科大、北京工大、长安大学、西安理工等高校担任教职(Due to their strong expertises on excellent command of CAD and CAE softwares, our group members are welcomed by many state key institutes and companies, ranging from aerospace, mechanical and elctronics engineering. )
热烈欢迎具有科学精神、勤奋刻苦、喜欢前沿交叉研究的学生报考！
欢迎对科学研究感兴趣的本科生到课题组和实验室参加科研训练！
Highly motivated students of various levels are welcomed to join our group for pursuing a Phd or master degree, or just receive training for doing research. Group meetings are open to all students. Foreign students have good command of English and solid background on mechanical engineering and aerospace engineering are also welcomed to apply for a visiting studentship or pursue a Phd or master degree at XJTU.
研究实例(Selected Research Examples)：
l 软机器设计与仿真(Design and simulation of soft machines)
(T. He, M. Li and J. Zhou, Soft Matter, 8(2012),3083-3089)
(Wei Guo, Meie Li and Jinxiong Zhou,Smart Mater. Struct. 22 (2013) 115028 (6pp))
介电弹性体(DE)超电致变形实验(左：未加电预拉伸状态；右：电致变形状态)
l 先进飞行器结构综合设计与优化(Design and optimization of aerospace structures)
航空航天结构优化设计
l结构屈曲分析与有限元仿真
薄壁圆柱壳屈曲失稳图
l反应堆堆顶及堆内构件热流固耦合分析
l反应堆堆内构件模态及动响应分析
l反应堆堆内构件流致振动分析
lHDR反应堆LOCA堆内构件动响应分析
招生(Recruitment) - 周 进雄研究生招生专业
1. 研究生招生学科：博士、学术型硕士：航空宇航科学与技术，专硕：机械
招生代码：082500
研究方向： 飞行器结构综合设计与优化，基于人工智能的新型计算方法及其工程应用，空间可展开结构设计，流致振动与核反应堆结构力学 (尤其鼓励力学、飞设专业的学生报考)
Phd or Master candidates should apply for a degree at Aerospace Science and Technology with index number 082500. The focus of research is aircraft structural design and optimization, AI based numerical methods for engineering applications, design of deployable structures, flow-induced vibration and structural mechanics of nuclear reactors.Students with engineerig mechanics or aircraft design engineering background are heartedly welcomed!
2. 硕士研究生专业课考试课程：
816 工程力学(理论力学和材料力学)或者 843 流体力学
复试科目：弹性力学，振动力学，空气动力学，自动控制原理，任选一.
Students may select engineering mechanics or fluid mechanics as courses for entrance examination. Background on theory of elasticity, finite element or theory of vibration is also necessary.
3. 博士后招聘：
研究方向：流固耦合，流致振动，反应堆结构力学。
People who interest in fluid-structure interaction, flow-induced vibration and structural mechanics of nuclear reactorsmay contact Prof. Jinxiong Zhou to apply for a research assistant or postdoc position. Candidates with expertise on computational fluid dynamics, finite element programming, and nuclear engineering are preferred.
热烈欢迎具有科学精神、勤奋刻苦、喜欢前沿交叉研究的学生报考！
欢迎对科学研究感兴趣的本科生到课题组和实验室参加科研训练！
Highly motivated students of various leveles are welcomed to join our group for pursuing a Phd or master degree, or just receive training for doing research. Group meetings are open to all students. Foreign students have good command of English and solid background on mechanical engineering and aerospace engineering are also welcomed to apply for a visiting studentship or pursue a degree at XJTU.
活跃学子(Group) - 周 进雄团队成员
现有成员(Current members)
1.2018级，博士生，航空宇航，孙善文
2. 2018级，博士生，航空宇航，贾,启,龙
3. 2019级，博士生，航空宇航，赵燮霖
4. 2020级，博士生，航空宇航，刘桐蔚
5.2018级，硕士生，航空宇航，宋 乐,琨
6. 2019级，硕士生，航空工程，鲍呈浩
7. 2019级，硕士生，航空工程，薛杨柳
8. 2019级，硕士生，材料加工，江静
9. 2020级，硕士生，航空宇航，郭瑞文
10. 2020级，硕士生，航空工程，高启丹
11. 2020级，硕士生，航空宇航，岳明楷
12. 2021级，硕士生，航空宇航，程钱
在校博士生
王国力 安宁, Harvard Exchange student
研究方向：软物质力学 研究方向：软物质力学
孙善文（2018级博士生）
研究方向：超材料
贾,启,龙（2018级博士生）
研究方向：可展开结构
赵燮霖（2019级博士生）
研究方向：流体力学
在读研究生
宋 乐,琨（2018级研究生）
研究方向：流体力学
江静（2019级硕士生）
课题组新闻(News) - 周 进雄科研动态
To be announced!
2020.9.1, Tongwei, Ruiwen, Qidan and Mingkai join our group! Welcome!
2019.12.1, Ning's paper is published online in Adv. Func. Mater. Big congrats to Ning!
2019.11.25, Ning wins the Young Student Award of the first National congress on Metamaterials. Congrats to Ning!
2019.11.1, Shanwen's paper on soft mechanical metamaterial is published online in APL. Congrats to Shanwen!
2019.9.7, Chenghao, Yangliu and Jing join our group as master degree students, welcome!
2019.9.4, Ning back from Harvard and joins our group again! Welcome Ning!
2018.7.1, Hao Sheng graduated from XJTU and went to Harvard as a Phd student!. Congratulations to Hao!
2017.9.1, Ning joined Prof. Bertoldi's group as visiting student for two years under the finicial support from CSC. Good job, Ning!
2017. 7.1, Xieling, Yingchao and Hang join our group as master degreee students. Welcome!
2016. 11. 10，Wenjie passes Phd oral defense. Congratulations!
2016. 9.1， Baohong and Canhui enrolled into Harvard University as Phd student and visiting student. Congratulations!
2016. 7.1, Yin Wang finished her Phd thesis defence. Congratulations!
2015. 12.1, Canhui Yang and Baohong Chen's paper is accepted in Adv. Mater. with impact factor 14. Super congratulations!
2015.9.1, Welcome Guoli Wang, Shanwen Sun and Chenghai Li join our group!
2015. 6.10， Yanhui Jiang, a third year master degree student, is admitted to enroll into University of Southern California as a Phd student with full scholarship. He will join Prof. Qiming Wang's group. Congratulations to Yanhui!
2015. 3. 5， Canhui and Baohong's work on ionic cable is now accepted by Extreme Mechanics Letters. Congratulations to Canhui and Baohong!
2014. 13-2014.11.22, Jinxiong participated 2014 ASME conference in Montreal and gave a talk on soft polymeric gels as ionic coductors for dielectric elastomers.
2014. 10. 20，Yin Wang and Yanhui Jiang won 2014 National Fellowships. Congratulations to Yin and Yanhui!
2014. 10.10-2014. 10.12, Jinxioing participated 2014 National conference on solid mechanics and presented a talk.
2014. 9.10, Zongling Jiang, Ziqi Ma and Ning An join our group as postgraduates. Hao Yu join us as undergraduate. Welcome Zongling, Ziqi, Ning and Hao as our new members!
2014. 5. 14, Our work on ionogel is highlighted by Chemical and Engineering News:http://cen.acs.org/articles/92/web/2014/05/Ionogels-Conduct-Stretch-Soft-Machines.html.
2014. 3. 15，Wei and Zhiming completed oral defense of their master degree thesis. Congratulations to Wei and Zhiming!
2014. 1. 25, Yin Wang and Yuanyuan Bai make their two papers accepted by Appl. Phys. Lett.. Congratulations to Yin and Yuanyuan!
2013. 12. 28, Wei Guo, a senior master student in our group, won the 2013 National Fellowship for her work published in SMS. Congratulations to Wei!
2013. 11.24, Jinxiong tied for Fifthin the Men's Singles of Table Tennis Match of Xi'an Jiaotong University. Congratulations to Jinxiong!
2013.10.16, Canhui Yang's paper on tough hydrogel is published in ACS Appl. Mater. Inter., Congratulations to Canhui!
2013.9.20, Fei Pan, a master degree student, and Ning An, an undergraduate student, join our group as new members. Welcome Fei and Ning!
2013.6.30-2013.7.5, Jinxiong attended the 7th International Conference on Materials for Advanced Technologies (ICMAT2013) in Singapore. Jinxiong gave a talk on the modelingof hydrogel-based soft machines.
2012.12. 21-2012.12. 22, Jinxiong attended the 260 Forum of Chinese Society of Science for Yong Scientists. The topic of the forum is frontier of solid mechanics and Jinxiong was invited to give a talk on the modeling and simulation of hydrogel soft machines.
2012. 12. 17, Jiasong Geng, a senior master student in our group, won the 2012 National Fellowship for his work published in IECR. Congratulations to Jiasong!
2012. 12.6-2012. 12. 8, Jinxiong attended the International Workshopon Soft Materials and Structures, which is held at Zhejinag University.
2012.11.9-2012.11.15, Jinxiong attended the ASME 2012 International Mechanical Engineering Congress & Exhibition in Houston. Jinxiong was invited to give a talk on electromechanical instability of dielectric elastomer.
2012.10.16-2012.10.19, Jinxiong attended the18th International Conferenceon Mechanics in Medicine and Biology (ICMMB-18)in Xi'an. Jinxiong was invited to give a talkduring the meeting.
2012.8.19-2012.8.24, Jinxiong participated the 23rd International Congress of Theoretical and Applied Mechanics(ICTAM 2012) inBeijing.
September 2012, Bo Li, one of the collaborators with our group, completed his oral defense of Phd thesis on dielectric elastomer. Congratulations to Dr. Li!
September 2012, Canhui Yang, Teng Wang, Wenxi Gao joined our group as first year postgraduates. Baohong Chen joined us as an undergraduate! Welcome the four guys!
August 2012, Guoyou Huang, our former group member, together with Zhiping Xiao published a paper on Soft Matter. Congratulations to Guoyou ang Zhiping.
April 2012, Jiasong Geng's paper on extended stress-diffusion model for swelling dynamics of hydrogel is published on Ind. Eng. Chem. Res. Congratulations to Jiasong!
January 20212, Tao He's paper on modeling of pH-sensitive hydrogel for microfluidic flow control is published on Soft Matter. Congratulations to Tao!
2011.12.21-2012.1.4, Jinxiong, Huibiao, Jiasong and Zhiping attended the Summer School on Soft Matter Mechanics at Zhejiang University. Jinxiong was invited to give a lecture duirng the meeting.
2011.8.22-2011.8.24, Jinxiong, Huibiao, Tao and Jiasong attended the 2011 Chinese Mechanics Meeting. Huibiao, Tao and Jiasong gave a presentation, respectively. As one of the co-chair, Jinxiong organized the symposium on soft material mechanics.
2011.4.25-2011.4.29, Jinxiong participated the 2011 MRS Spring Meeting and Exhibition in San Francisco. He visited Stanford Univeristy and UCB.
2006.11-2007.11, Jinxiong stayed at School of Engineering and Applied Sciences, Harvard University as visiting scholar.
Pierce Hall of Harvard
业余爱好(Hobby) - 周 进雄爱好
To be announced
2016年12月28日，进雄参加航天航空学院教职工越野赛，名列第八，是前十名中唯一年龄超过45岁者，加油！
2016年10月29日，进雄参加“西凤6年杯”西安市第8届乒乓球等级联赛，进雄出场5场，3胜2负，仍需继续努力！
2016年9月23-24日，进雄参加西安交通大学教职工乒乓球团体赛，航天队以小组第二出线，进雄出场5场，3胜2负，尤其是和材料队的比赛中，在2：1领先的情况下，以2：3惜败，反映出心理素质和求胜欲望不够强大！
2016年6月19日，进雄在航天航空学院师生乒乓球赛中勇夺冠军，祝贺！
2013年11月24日，进雄在2013年西安交通大学教工乒乓球比赛中，杀入八强，取得并列第5名的历史最好成绩。在八进四中，由于心理素质差和比赛经验欠缺，惜败！以后要多多努力！
2011年西安交通大学教工男子1500m乙组长跑第4名
2007 Niagra Falls
Niagra Falls
毕业生（Alumni） - 周 进雄桃李天下
学生就业(Career Development of Alumi)
近几年毕业的研究生有8人获得国家奖学金(耿嘉嵩，2013届硕士；郭为，2014届硕士；江衍辉， 2015届硕士；王垠，2015届博士；潘飞，2016届硕士；杨灿辉，博士生；陈宝鸿，2016届硕士；孙文杰，2016届博士)，主要分配至航空航天、机械、电子等大型国有企业和研究所工作，如航天一院、航天五院、航天二院、航天九院、 空空导弹研究院、中电28所、中国商发、中科院小卫星中心、中国核动力院、东方电气、兵器203所等。(Due to their strong expertises on excellent command of CAD and CAE softwares, our group members are welcomed by many state key institutes and companies, ranging from aerospace, mechanical and elctronics engineering. ) 课题组也有很多研究生在完成学业过程中或获得学位后获得在国外留学深造的机会(2005届博士，张智谦，日本庆应大学，新加坡南洋理工、IHPC；2007届硕士，王小娟，新加坡国立；2015届硕士，江衍辉，美国南加州大学；2016届博士，王垠，UT Austin；刘凡，美国Geogia Tech.；2016届硕士，潘飞，香港城市；杨灿辉，Harvard；2016届硕士，陈宝鸿，Harvard；2016级博士生，安宁，Harvard；2018届硕士，盛昊，Harvard)。
指导毕业的研究生(Zhou Group Alumi)
2021届，博士生，航空宇航，王国力(中国工程物理研究院)
2021届，博士生，航空宇航，孙善文(潍柴动力)
2021届，硕士生，力学，宋乐琨(中国飞机强度研究所)
2020届，硕士生，力学，杨航(哈佛大学博士生)
2020届，博士生，航空宇航，安宁(RMIT博士后)
2020届，硕士生，航空宇航，马英超(航天六院11所)
2020届，硕士生，航空宇航，刘航(中航第一飞机设计研究院)
2019届，硕士生，力学，李成海(加州大学圣地亚哥分校博士生)
2019届，硕士生，力学，邬康伶(瑞士联邦理工学院博士生)
2018届，硕士生，航空宇航，余豪(深圳恒腾网络有限公司)
2018届，硕士生，力学，盛昊(哈佛大学博士生)
2017届，博士生，力学，杨灿辉(哈佛大学博士后)
2017届，硕士生，力学，马梓淇(中航光电科技股份有限公司)
2017届，硕士生，材料加工，蒋宗玲(苏州博世汽车部件有限公司)
2017届，博士生，航空宇航，刘凡(航天五院504所)
2016届，硕士生，航空宇航，潘飞(香港城市大学博士生)
2016届，博士生，力学，王垠(西安理工大学土木学院教师)
2016届，硕士生，力学，陈宝鸿(哈佛大学博士生)
2016届，博士生，力学，孙文杰(西安理工大学机仪学院教师)
2015届，硕士生，飞行器设计，江衍辉(美国南加州大学博士生)
2015届，硕士生，力学，王腾(航天一院一部)
2015届，硕士生，力学，高文喜(中航电力研发中心)
2014届，硕士生，飞行器设计，郭为(中国商发)
2014届，硕士生，固体力学，李志明(东方电气集团)
2014届，硕士生，材料加工，靳超(京东)
2014届，硕士生，材料加工，吕珊(石家庄车辆厂)
2014届，硕士生，航天工程，王玉成(兵器203所)
2013届，硕士生，飞行器设计，李慧镖(航天二院二部)
2013届，硕士生，固体力学，耿嘉嵩(中电28所)
2013届，硕士生，飞行器设计，何涛(上海小卫星工程中心)
2013届，硕士生，力学，孙文杰(西安交大博士生)
2013届，博士生，力学，王鹏飞(航天五院钱学森实验室)
2012届，硕士生，飞行器设计，贾湘婷(武汉航天科工九院)
2012届，硕士生，固体力学，肖志平(中国空空导弹研究院)
2011届，硕士生，飞行器设计，杨庆顺(深圳通创通讯公司)
2010届，硕士生，材料加工，吴庆棋(新疆电力研究院)
2009届，硕士生，固体力学，王小鹏(哈尔滨电机厂)
2009届，硕士生，飞行器设计，吴艳之(西安庆安集团)
2008届，硕士生，材料加工，李宁(中国核动力研究设计院)
2007届，硕士生，工程力学，王小娟(新加坡国立大学博士)
2007届，硕士生，工程力学，赵群(碧桂园房地产公司)
2006届，硕士生，工程力学，邹玮(三门核电厂)
2006届，硕士生，工程力学，李琼(宁波市建委)
2005届，博士生，力学，张智谦(新加坡IHPC)
2003届，硕士生，结构工程，张红艳(长安大学)
2003届，硕士生，结构工程，王学明(西北电力设计院)
2003届，硕士生，工程力学，周宁(西南交大博士)
2003届，硕士生，结构工程，张艳芬(天津水泥设计院)
2003届，硕士生，工程力学，文建波(上海艺唯电子)
2002届，硕士生，工程力学，张智谦(新加坡IHPC)
指导毕业的本科生(Former undergraduate students)
2021届，飞行器设计，程钱(西交大硕士)
2020届，飞行器设计，李嵩(北航硕士)
2020届，飞行器设计，郭瑞文(西交大硕士)
2019届，飞行器设计，程子昕
2019届，飞行器设计，郑鹏
2019届，飞行器设计，韩周昱
2018届，飞行器设计，武开荣(西工大航空学院硕士)
2018届，飞行器设计，徐加雨(深圳华为)
2017届，工程力学，杨航(西交博士生)
2017届，工程力学，赵燮霖(西交硕士生)
2017届，飞行器设计，马英超(西交硕士生)
2017届，飞行器设计，邵一潇(西安卫星测控中心)
2016届，工程力学，孙善文(西交硕士生)
2016届，工程力学，李成海(西交硕士生)
2016届，飞行器设计，赵轩(清华硕士生)
2015届，飞行器设计，王慧敏(上海交大硕士生)
2015届，飞行器设计，弋东驰(西交硕士生)
2015届，飞行器设计，余豪(西交硕士生)
2015届，工程力学，盛昊(西交硕士生)
2014届，飞行器设计，易兵(上海交大硕士)
2014届，飞行器设计，安宁(西交大硕士)
2013届，飞行器设计，陈宝鸿(西交硕士)
2013届，飞行器设计，李岗
2012届，飞行器设计，江衍辉(西交硕士)
2012届，飞行器设计，杨飞飞
2012届，飞行器设计，李哲
2012届，结构工程，杨灿辉(西交硕士)
2011届，飞行器设计，何涛(西交硕士)
2011届，飞行器设计，郭为(西交硕士)
2010届，飞行器设计，李慧镖(西交硕士)
2010届，飞行器设计，李永涛(北航硕士)
2010届，飞行器设计，耿嘉嵩(西交硕士)
2009届，飞行器设计，王涛(北航研究生)
2009届，飞行器设计，贾湘婷(西交硕士)
2006届，飞行器制造，戴攀(西安交大硕士)
2021届毕业生
王国力
研究方向：软物质力学
孙善文（2018级博士生）
研究方向：超材料
宋乐琨（2018级研究生）
研究方向：流体力学
2020届毕业生
安宁, Harvard Exchange student
研究方向：软物质力学
刘航（2017级研究生）
研究方向：间隙梁计算
杨航（2017级研究生，与锁志刚教授联合培养）
研究方向：软物质力学
马英超（2017级研究生）
研究方向：流固耦合
2019届毕业生
李成海（2016级硕士） 邬康伶（2016级硕士）
加州大学圣地亚哥分校博士生 瑞士联邦理工学院博士生
2018届毕业生
余豪（2015级硕士）
工作单位：深圳恒腾网络有限公司
2017届毕业生
马梓淇（2014级硕士） 刘凡（2012级博士）
工作单位：中航光电科技股份有限公司 航天五院504所博士后
杨灿辉
工作单位：南方科技大学
2016届毕业生
潘飞(2013级) 陈宝鸿（2013级)
香港城市大学博士生 哈佛大学博士生
王垠（2011级博士，与张陵教授联合指导） 孙文杰（2013级博士）
工作单位：西安理工大学教师 工作单位：西安理工大学教师
2015届毕业生
江衍辉(2012级) 高文喜(2012级)
美国南加州大学博士生 工作单位：中航电力研发中心
王腾（2012级）
工作单位：航天一院一部
2014届毕业生
李志明（2011级） 郭为(2011级)
工作单位：东方电气集团 工作单位：中国商发
2013届毕业生
李慧镖 耿嘉嵩
工作单位：航天二院二部 工作单位：中电28所
何涛
工作单位: 中科院上海微小卫星工程中心
2012届毕业生
贾湘婷 肖志平
工作单位：航天三江集团第九研究所 工作单位：中国空空导弹研究院
2011届毕业生
杨庆顺
工作单位：深圳通创通信有限公司
相册（Album） - 周 进雄相册
课题组历届成员合影
2020年 安宁博士毕业答辩
2020年 宋乐琨 郭瑞文 赵燮霖 成都完成外协项目
2020年 贾启龙 刘凡 安宁
2019年 课题组新春聚会
2019年 哈尔滨SMN
2019年 成都流体力学与工程应用研讨会
2019年 西安超材料大会
2017年 刘凡博士毕业答辩
2016年元旦课题组留念
2016年 孙文杰博士毕业答辩
2013年元旦课题组聚餐
2012年秋游石砭峪上天寺芦苇荡(同行的三个小鬼来凑热闹)
2012年课题组春游
课题组2010年秋游(塔屿到库屿穿越)
