jessezhu@tju.edu.cn
化学工程
天津化学化工协同创新中心首席科学家
教授
Gaseous fluidization aids

---

Method for Recovering Ionic Products

---

Method and Apparatus for Dispensing Paint Powders for Powder Coatings

---

Liquid-Solid Circulating Fluidized Bed Waste Water Treatment System for Simultaneous Carbon, Nitroge

---

Apparatus for volumetric metering of small quantity of powder from fluidized beds

---

Direct Coating Solid Dosage Forms Using Powdered Materials

---

Dry Powder Inhaler

---

Apparatus for volumetric metering of small quantity of powder from fluidized beds

---

Precision dispensing of ultra-fines via a gas medium
A low-molecular-weight gas is added to the fluidizing gas including hydrogen, deuterium, tritium and/or helium as a fluidization aid in the fluidization of powder. The low-molecular-weight gas is hydrogen, deuterium, tritium and/or helium.

---

Ionic products of interest are recovered by passing ion exchange particles in countercurrent flow with a feed stream of a first fluid through a first fluidized bed; transferring particles...

---

A ground electrode (10) is set in chamber spaced upstream of a high voltage electrode (24) set in chamber spaced upstream of the outlet passageway (18) of the chamber (16) of a housing (12).

---

A liquid-solid circulating fluidized bed system (S1) comprises first fluidized bed (B1), second fluidized bed (B2), and first and second connecting device connected to (B1) and (B2)

---

Fluidized bed for dispensing powders has a housing defining an enclosure and having a fluid injection mechanism to inject a fluid into the enclosure to fluidize particulate matter within the housing...

---

The method involves positioning solid dosage forms in a rotary coater chamber (32) of a rotatable grounded housing. A spraying cycle is performed with a plasticizer...

---

A dry powder inhaler (160) comprises a housing (166) and a blister pack (310) mounting mechanism, the blister pack including a holding plate and powder pockets containing a pre-selected amount of powder medicament...

---

Fluidized bed for dispensing powders has a housing defining an enclosure and having a fluid injection mechanism to inject a fluid into the enclosure to fluidize particulate matter within the housing...

---

A dispensing system for dry particles comprises a first-stage gas-solids fluidization chamber (20), a second-stage gas-solids fluidization chamber(s) (30)...
Optimal design of liquid-solid circulating fluidized bed for continuous protein recovery

---

Investigation of a dual-particle liquid-solid circulating fluidized bed bioreactor for extractive fermentation of lactic acid

---

Detailed measurements of flow structure inside a dense gas-solids fluidized bed

---

Numerical study of the effect of the gas and solids distributors on the uniformity of the radial solids concentration distri

---

A New Method for the Determination of Cluster Velocity and Size in a Circulating Fluidized Bed

---

Catalytic reaction in a circulating fluidized bed downer: Ozone decomposition

---

An Experimental and Modeling Study of Ash Deposition Behaviour for Co-Firing Peat with Lignite

---

Comparative Modeling of Biological Nutrient Removal from Landfill Leachate Using a Circulating Fluidized Bed Bioreactor (CFBB

---

Evaluation of Biological Nutrient Removal from Wastewater by Twin Circulating Fluidized Bed Bioreactor (TCFBBR) Using a Predi

---

Fluidization of Sawdust in a Cold Model Circulating Fluidized Bed: Experimental Study

---

Visualization of Particle Aggregation and Effects of Particle Properties on Cluster Characteristics in a CFB Riser

---

Effects of Acoustic Vibration on Nano and Sub-Micron Powders Fluidization

---

Ash Deposition in Co-Firing Three-Fuel Blends Consisting of Woody Biomass, Peat and Lignite in a Pilot-Scale Fluidized-Bed Re

---

Ash and Chlorine Deposition during Co-combustion of Lignite

---

Numerical and Experimental Studies on the Flow Multiplicity Phenomenon for Gas-Solids Two-Phase Flows in CFB Risers

---

Resolution of Sertraline with (R)-Mandelic Acid: Chiral Discrimination Mechanism Study

---

Simultaneous Carbon and Nitrogen Removal with Enhanced Bioparticle Circulation in a Circulating Fluidized Bed Biofilm Reactor

---

Superhydrophobic RTV silicone rubber insulator coatings

---

Improvement of the Uniformity of Radial Solids Concentration Profiles in Circulating Fluidized Bed Risers

---

Improvement of the Uniformity of Radial Solids Concentration Profiles in Circulating Fluidized Bed Risers

---

Development of a Calibration Protocol and Identification of the Most Sensitive Parameters for the Particulate Biofilm Models

---

A New Definition of Bed Expansion Index and Voidage for Fluidized Biofilm-Coated Particles

---

A Novel Fluidized Bed Respirometric Technique for Determination of In-Situ Biofilm Kinetics

---

Nano-TiO2 Enriched Polymeric Powder Coatings Support Human Mesenchymal Cell Attachment and Growth

---

Numerical and Experimental Studies on the Flow Multiplicity Phenomenon for Gas-Solids Two-Phase Flows in CFB Risers

---

Mimicking Lotus Leaf: Development of Micro-Nanostructured Biomimetic Superhydrophobic Polymeric Surfaces by Ultrafine Powder

---

A Hydrodynamic Model of a Circulating Fluidized Bed with Low-Density Particle

---

Ash Deposition in Co-Firing Three-Fuel Blends Consisting of Woody Biomass, Peat and Lignite in a Pilot-Scale Fluidized-Bed Re

---

Investigation of the Recyclability of Powder Coatings

---

Fluidization of Nano and Sub-Micron Powders Using Mechanical Vibration

---

Theoretical and Numerical Studies on the Flow Multiplicity Phenomenon for Gas-Solids Two-Phase Flows in CFB Risers

---

Effects of Particle Properties on Flow Structure in a 2-D Circulating Fluidized Bed: Solids Concentration Distribution and Fl

---

TiO2-Enriched Polymeric Powder Coatings Support Human Mesenchymal Cell Spreading and Osteogenic Differentiation

---

Pilot-scale Experience with Biological Nutrient Removal and Biomass Yield Reduction in a Liquid-solid Circulating Fluidized B

---

A Novel Electrostatic Dry Powder Coating Process for Pharmaceutical Dosage Forms: Immediate Release Coatings for Tablets

---

Ash Deposition during Co-Firing Biomass and Coal in a Fluidized-Bed Combustor

---

Effect of Dynamic Loading on Biological Nutrient Removal in a Pilot-Scale Liquid-Solid Circulating Fluidized Bed Bioreactor

---

Terminal Settling Velocity and Drag Coefficient of Biofilm-Coated Particles at High Reynolds Numbers

---

Sustained release coating of tablets with Eudragit (R) RS/RL using a novel electrostatic dry powder coating process

---

Experimental Study on Solids Concentration Distribution in a Two-Dimensional Circulating Fluidized Bed

---

Dynamic Testing of the Twin Circulating Fluidized Bed Bioreactor (TCFBBR) for Nutrient Removal from Municipal Wastewater

---

Numerical Study on the Effect of the Air Jets at the Inlet Distributor in the Gas-Solids Circulating Fluidized-Bed Risers

---

Sertraline Racemate and Enantiomer: Solid-State Characterization, Binary Phase Diagram, and Crystal Structures

---

Axial hydrodynamic studies in a gas-liquid-solid circulating fluidized bed riser

---

Optimal design of liquid-solid circulating fluidized bed for continuous protein recovery

---

Flow properties of fine powders in powder coating

---

Mechanistic Study of the Bactericidal Action of Silver-Loaded Chabasite on Acidithiobacillus Thiooxidans

---

Modeling Biological Nutrient Removal in a Liquid-Solid Circulating Fluidized Bed Bioreactor

---

Biological Nutrient Removal Using a Novel Laboratory-Scale Twin Fluidized-Bed Bioreactor

---

Measurement of inter-particle forces by an interfacial force microscope

---

Circulating turbulent fluidization-A new fluidization regime or just a transitional phenomenon

---

Crystallization of Racemic Compound and Conglomerate of (RS)-2-Chloromandelic Acid

---

Crystallization of the Racemic Compound and Conglomerate of (RS)-2-Chloromandelic Acid

---

Characterization of powder flow: Static and dynamic testing

---

Demarcation of a New Circulating Turbulent Fluidization Regime

---

Identification and Characterization of Solid-State Nature of 2-Chloromandelic Acid

---

Onset of an Innovative Gasless Fluidized Bed-Comparative Study on the Fluidization of Fine Powders in a Rotating Drum and a T

---

Characterization of fluidization behavior in the bottom region of CFB risers

---

Hydrodynamics and scale-up of liquid-solid circulating fluidized beds: Similitude method vs. CFD

---

Solids concentration in the fully developed region of circulating fluidized bed downers

---

Comparative study of flow structure in circulating fluidized bed risers with FCC and sand particles

---

Simulation of FCC Catalyst Regeneration in a Riser Regenerator

---

Downer reactor: From fundamental study to industrial application

---

Dry powder platform for pulmonary drug delivery

---

Dry coating, a novel coating technology for solid pharmaceutical dosage forms

---

Hydrodynamic similarity in circulating fluidized bed risers

---

Load maximization of a liquid-solid circulating fluidized bed bioreactor for nitrogen removal from synthetic municipal wastew

---

Gas-solids flow structures in a novel circulating-turbulent fluidized bed

---

Comparative study of flow structures in a circulating-turbulent fluidized bed

---

A general empirical formula of current-voltage characteristics for point-to-plane geometry corona discharges

---

Hydrodynamics and flow development in a 15.1 m circulating fluidized bed riser

---

Characteristics of gas-solid mass transfer in a cocurrent downflow circulating fluidized bed reactor

---

Simultaneous carbon, nitrogen and phosphorous removal from municipal wastewater in a circulating fluidized bed bioreactor

---

Cocurrent Downflow Circulating Fluidized Bed (Downer) reactors-A State of the Art Review