科研团队


新能源电能变换技术与装备团队
电力电子化能源系统实验室（MPEES）


学术身份


博士生导师；
中组部“高水平海外人才”；
山东大学“杰出中青年****”；
IEEE Senior Member；
Associate Editor of IEEE Trans. Ind. Electron.；
电源协会变频电源与电力传动专委会、青工委、交通电气化专委会（常务）委员、自动化学会预测控制学组委员；
济南市创新领军人才（B类）、中国、德国、波兰自然科学基金（函评）评委，
IEEE电力电子与电力传动系统模型预测控制大会程序委员会主席（2019）、大会主席（2021）。


个人信息
姓名
张祯滨
性别
男
出生日期
1984
籍贯
济阳
职称
教授
电话：
0531-8839 2002
Email：
zbz@sdu.edu.cn
zhenbin.zhang@tum.de
个人主页：
https://faculty.sdu.edu.cn/ZbZhang/zh_CN/index.htm


主要学习与工作经历


2004-2008 哈尔滨工程大学，电气 学士（法学双学位）
2008-2011 山东大学，控制 硕士
2011-2016 慕尼黑工业大学，电气 博士(suma cum laude)
2016-2017 慕尼黑工业大学，博后研究员、课题组组长
2017-今 山东大学，教授、海外联络教授
2018-今 慕尼黑工业大学，客座教授


研究方向


预测控制及其在新能源与大功率能量变换中的应用：
①兆瓦级海洋风电及其汇集并网变流系统，
②交直流混联微（智能）电网系统与装备，
③大功率四象限变流器及海工电驱动装备，
④车用氢燃料电池电气系统。


学术著作


近年来部分期刊发表如下：
1. C. Zheng, T. Dragicevic, Z. Zhang, J. Rodriguez, F. Blaabjerg, “Model Predictive Control of LC-Filtered Voltage Source Inverters With Optimal Switching Sequence”,
IEEE Transactions on Power Electronics, 2020. (录用, IF: 7.224，SCI一区)
2. J. Wang, Y. Tang, Y. Qi, P. Lin, Z. Zhang, “A Unified Startup Strategy for Modular Multilevel Converters with Deadbeat Predictive Current Control”,
IEEE Transactions on Industrial Electronics, 2020. (录用, IF: 7.503，SCI一区)
3. Z. Dong, X. L. Li, C. K. Tse, Z. Zhang, “Derivation of Single-Input Dual-Output Converters With Simple Control and No Cross Regulation”,
IEEE Transactions on Power Electronics, 2020. (录用, IF: 7.224，SCI一区)
4. C. Liu, D. Kong, Z. Zhang, Z. Pei, R. Kennel, “Single-stage Control System of I-MMC-based Island MVDC Link Receiver with Multiple Modulation Freedoms”,
IEEE Access, 2020. (录用, SCI)
5. L. Yan, F. Wang, M. Dou, Z. Zhang, “Active Disturbance Rejection-Based Speed Control in Model Predictive Control for Induction Machines”,
IEEE Transactions on Industrial Electronics, 2020. (发表, IF: 7.503，SCI一区)
6. X. Gao, M. Abdelrahem, C. Hackl, Z. Zhang, R. Kennel, “Direct Predictive Speed Control With a Sliding Manifold Term for PMSM Drives”,
IEEE J. of Emerging and Selected Topics in Power Electron., 2019. (发表, IF: 5.972，SCI一区)
7. C. Liu, C. Liu, G. Cai, H. Ying, Z. Zhang, “An Isolated Modular Multilevel Converter (I-M2C) Topology based on High-Frequency Link (HFL) Concept”,
IEEE Transactions on Power Electronics, 2019. (发表, IF: 7.224，SCI一区)
8. Y. Sun, Z. Zhang, “Hybrid Predictive Control with Simple Linear Control Based Circulating Current Suppression for Modular Multilevel Converters”,
CES TEMS, 2019. (发表)
9. Z. Zhang (通信作者), Z Li, M. Kazmierkowski, J. Rodriguez, R. Kennel, ``Robust Predictive Control of Three-Level NPC Back-to-Back Power Converter PMSG Wind Turbine Systems with Revised Predictions”,
IEEE Transactions on Power Electronics, 2018. (发表, IF: 7.224，SCI一区)
10. F. Wang, Z. Zhang, X. Mei, J. Rodriguez, R. Kennel, ``Advanced Control Strategies of Electrical Drives: Field Oriented Control, Direct Torque Control and Model Predictive Control'',
Energies, 2018. (发表, IF: 2.707，SCI四区)
11. M. Norambuena, J. Rodriguez, Z. Zhang, C. Garcia, R. Kennel, “A Very Simple Strategy for High Quality Performance of AC Machines Using Model Predictive Control”,
IEEE Transactions on Power Electronics, 2018. (发表, IF: 7.224，SCI一区)
12. B. Kahia, A. Bouafia, A. Chaoui, Z. Zhang, M. Abdelrahem, R. Kennel, "A direct power control strategy for three level neutral-point-clamped rectifier under unbalanced grid voltage'',
Electric Power Systems Research, 2018. (发表, SCI三区)
13. Z. Zhang, H. Fang, F. Gao, J. Rodriguez, R. Kennel, ``Multiple Vector Model Predictive Power Control for Grid-Tied Wind Turbine System with Enhanced Steady State Control Performances”,
IEEE Transactions on Industrial Electronics, 2017. (发表, IF: 7.503，SCI一区)
14. Z. Zhang, F. Wang, J. Wang, J. Rodriguez, R. Kennel, ‘’Nonlinear Direct Control for Three-Level NPC Back-to-Back Converter PMSG Wind Turbine Systems: Experimental Assessment with FPGA'',
IEEE Transactions on Industrial Informatics, 2017. (发表, IF: 7.377，SCI一区)
15. Z. Zhang, J. Rodriguez, R. Kennel, “Advanced Control Strategies for Direct-Drive PMSG Wind Turbine Systems: Direct Predictive Torque Control Approaches”
CPSS Transactions on Power Electronics and Applications, 2017. (特邀论文，发表)
16. X. Cai, Z. Zhang (通信作者), R. Kennel, ``Optimal control solutions for PMSM drives: a comparison study with experimental assessment'',
IEEE J. of Emerging and Selected Topics in Power Electron., 2017. (发表, IF: 5.972，SCI二区)
17. F. Wang, Z. Zhang, J. Wang, R. Kennel, J. Rodriguez, ``Sensorless model-based PCC for induction machine'',
IET Electric Power Applications, 2017. (发表, IF: 3.051，SCI三区)
18. X. Cai, H. Sun, Z. Zhang, R. Kennel, “An Optimal Fixed Gain Filter for Angular Motion”,
IEEE Transactions on Industrial Electronics, 2017. (发表, IF: 7.503，SCI一区)
19. A. Mohamed, C. Hackl, Z. Zhang, R. Kennel, “Robust Predictive Control for Direct-Driven Surface-Mounted Permanent-Magnet Synchronous Generators Without Mechanical Sensors”,
IEEE Transactions on Energy Conversion, 2017. (发表, IF: 4.614，SCI三区)
20. Z. Zhang, C. Hackl, R. Kennel, “Computationally Efficient DMPC for Three-level NPC Back-to-Back Converters in Wind Turbine Systems with PMSG”,
IEEE Transactions on Power Electronics, 2016. (发表, IF: 7.224，SCI一区)
21. Z. Zhang, F. Wang, T. Sun, J. Rodr?guez, R. Kennel, “FPGA Based Experimental Investigation of a Quasi-Centralized Model Predictive Control for Back-to-Back Converters”,
IEEE Transactions on Power Electronics, 2016. (发表, IF: 7.224，SCI一区)
22. Z. Zhang, T. Sun, F. Wang, J. Rodriguez, R. Kennel, “A Computationally-Efficient Quasi-Centralized DMPC for Back-to-Back Converter PMSG Wind Turbine Systems Without DC-link Tracking Errors”,
IEEE Transactions on Industrial Electronics, 2016. (发表, IF: 7.503，SCI一区)
23. X. Cai, Z. Zhang, R. Kennel, “Improved Predictive Control of Three-level Neutral-Point-Clamped Power Converters with Decoupled Neutral-Point Voltage Balancing Control”,
IEEE Transactions on Industrial Informatics, 2016. (发表, IF: 7.377，SCI一区)
24. F. Hui, Z. Zhang, X. Feng, R. Kennel, ``Ripple-reduced model predictive direct power control for active front-end power converters with extended switching vectors and time-optimised control '',
IET Power Electronics, 2016. (发表, IF: 2.839，SCI三区)
25. J. Wang, F. Wang, Z. Zhang, S. Li, R. Kennel, J. Rodriguez, “Design and Implementation of Disturbance Compensation-Based Enhanced Robust Finite Control Set Predictive Torque Control for Induction Motor Systems'',
IEEE Transactions on Industrial Informatics, 2016. (发表, IF: 7.377，SCI一区)
26. Z. Zhang, H. Xu, M. Xu, Z. Chen, T. Sun, R. Kennel, C. Hackl, “Predictive Control with Novel Virtual Flux Estimation for Back-to-Back Converters”,
IEEE Transactions on Industrial Electronics, 2015. (发表, IF: 7.503，SCI一区)
27. F. Wang, S. Davari, Z. Chen, Z. Zhang, D. Arab Khaburi, J. Rodreguez, R. Kennel, “Finite Control Set Model Predictive Torque Control of Induction Machine with a Robust Adaptive Observer”,
IEEE Transactions on Industrial Electronics, 2015. (发表, IF: 7.503，SCI一区)
28. Z. Chen, F. Wang, G. Luo, Z. Zhang, R. Kennel, “Secondary Saliency Tracking-Based Sensorless Control for Concentrated Winding SPMSM '',
IEEE Transactions on Industrial Informatics, 2016. (发表, IF: 7.377，SCI一区)
29. F. Wang, Z. Zhang, A. Davari, R. Fotouhi, D. Khaburi, J. Rodriguez, R. Kennel, “An Encoderless Predictive Torque Control for an Induction Machine with a Revised Prediction Model and EFOSMO'',
IEEE Transactions on Industrial Electronics, 2014. (发表, IF: 7.503，SCI一区)
30. F. Wang, Z. Zhang, A. Davari, R. Kennel, ``An Experimental Assessment of finite-state Predictive Torque Control for Electrical Drives by Considering Different Online-Optimization Methods'',
Control Engineering Practice, 2015. (发表, IF: 3.232，SCI三区)


主要科研项目


1、 中组部“高水平海外人才”项目（优先资助）：
“大功率新能源变流器与电驱系统模型预测控制”，
2019-2024，负责人。
2、 山东大学“齐鲁青年****”建设项目：校内人才计划，
2017-2022，负责人。
3、 国家自然科学基金（面上）：
“大功率风电变流器级联结构高效模型预测控制”，
2020-2023，负责人。
4、 山东省重大科技创新工程：
“大功率海上直驱永磁同步风电变流器与控制关键技术”，2019-2021，负责人。
5、 山东省自然科学基金：
“永磁同步风力发电三电平功率变流器及其预测控制策略研究”，2019-2021，负责人。
6、 江苏省自然科学基金：
“永磁同步电机四象限驱动系统高可靠模型预测控制”，2019-2021，负责人。
7、 山东大学国际合作基金：“智慧能源与先进能量变换系统”联合实验室，2020-2024，负责人。
8、 企业委托：“石油开采远距离变频驱动技术研究”，2020-2021，项目执行及技术负责人，等。


学术类型


教学科研型。
有志于攻读本人所在研究方向硕、博士研究生的同学，请邮件联系，请附个人简历并标注①关键课程②专业特长和③科研履历等。特别突出者，可与德国、瑞士、奥地利、芬兰、意大利、香港、丹麦、智利等国家（地区）知名院校联合培养。