王腾, 李树勃, 肖炜杰, 包兴先
中国石油大学(华东)石油工程学院, 山东 青岛 266580

摘要:
点吸收式波能转换装置是具有较好应用前景的一种波浪能开发利用装置，其参数设计直接影响到波浪能开发利用的可行性与有效性。作者针对青岛斋堂岛目标海域海况，通过数值模拟首先应用单因素敏感性分析法分析了双浮子点吸收式波能转换装置的结构尺寸、锚固形式、波流夹角、PTO阻尼、PTO刚度等参数对装置俘能功率的独立影响规律。之后考虑多参数的综合影响，通过运用稳健设计方法，以上述参数为控制因子并确定合理的变动水准，将俘能功率作为评价标准，选取合理的正交实验L矩阵，得到了不同参数组合情况下的装置俘能功率并进行统计分析。结果表明，浮子尺寸、PTO阻尼、波流夹角对装置俘能功率影响较大，而PTO刚度、锚链与铅垂线夹角、锚链与波浪在水平面内的夹角对俘能功率影响不明显。提出的参数研究方法可为其他海域点吸收式波能转换装置参数设计提供参考。
关键词:点吸收双浮子波能转换装置参数研究俘能功率稳健设计方法
DOI：10.11759/hykx20200806002
分类号:P742
基金项目:国家自然科学基金资助项目（51979283）；山东省自然科学基金资助项目（ZR2018MEE053）

Parameter study of two-body point absorption wave energy converters
WANG Teng, LI Shu-bo, XIAO Wei-jie, BAO Xing-xian
College of Petroleum Engineering, China University of Petroleum(East China), Qingdao 266580, China
Abstract:
A point absorption wave energy converter is a wave energy development and utilization device with good application prospects. Its parameter design directly affects the feasibility and effectiveness of wave energy development and utilization. In this study, considering the real sea conditions in Zhaitang Island, China, the effect of different parameters such as buoy's size, anchorage form, the angle between the direction of wave propagation and that of the current, PTO damping and PTO stiffness on the two-body point absorption wave energy converter performance is analyzed using the single factor sensitivity analysis method. Further, a robust design method is used to comprehensively determine the influence of these parameters on the captured power efficiency of the converters. In this method, the captured power is considered as the evaluation criterion, the reasonable change levels of these parameters are considered, and an orthogonal experimental L matrix is constructed. Several cases of the captured power efficiency under various parameter combinations are analyzed. Results show that the PTO damping, buoy's diameter, and the angle between the direction of wave propagation and that of the current significantly influence the captured power efficiency. However, the angle between the anchor chain and the plumb line, the angle between the projection of the anchor chain in the horizontal plane and the direction of the wave, and the PTO stiffness have little effect on the captured power efficiency. The proposed method can be used for the parameter design of the point absorption wave energy generator in other sea areas.
Key words:point absorptiontwo-body wave energy convertersparameters studycaptured powerrobust design method





PDF全文下载地址:

点我下载PDF