杨帆，男，博士，教授，博士生导师，院长助理。
同济大学航空航天与力学学院。
Fan Yang, Ph.D., Associate Professor, Assistant Dean of School of Aerospace Engineering and Applied Mechanics
电子邮箱/Email：fanyang@tongji.edu.cn
电话/Telephone：


教育经历/Education：
1999.09-2004.07 清华大学/Tsinghua University 工程力学专业 学士/Bachelor
2004.09-2005.12 清华大学/Tsinghua University 固体力学专业 硕士/Master
2005.12-2009.07 清华大学/Tsinghua University 固体力学专业 博士/Ph.D.

工作经历：
2009.08-2011.07，美国俄亥俄州立大学/Ohio State University，纳米科技中心，博士后/Postdoc
2011.08-2014.03，加拿大多伦多大学/University of Toronto，机械工程系，博士后/Postdoc
2015.08-2015.10，美国休斯敦大学/University of Houston，机械工程系，访问****/Visiting Scholar
2014.04至今，同济大学/Tongji University，航空航天与力学学院，副教授/Associate Professor

主要研究方向/Research Interests：
纳米晶金属的变形与断裂行为/ Mechanical behavior of nanocrystalline metals
喷丸强化与喷丸成形力学机理/ Mechanisms of shot peening and peen forming
薄壁管件的抗冲击吸能性能/ Energy absorption of thin-walled structures
聚合物纳米超薄薄膜的力学性能/ Mechanical behavior of ultra-thin polymer films
封装电路板的热应力可靠性/ Thermal stresses in electronic packaging
腹主动脉血管组织力学性能/ Mechanical properties of abdominal aortas

主讲课程/Courses Teaching：
理论力学/Theoretical Mechanics
塑性力学/Plastic Mechanics
三维建模与网格划分/3D Modeling and Meshing
工业装备虚拟仿真技术/Modelling and Simulations in Industry

期刊论文/Peer Reviewed Papers：
1.Fan Yang, Hualin Fan, Shaker A. Meguid, “Analytical, Numerical and Experimental Studies of the Effect of Foam-Filling on Collapse Mode Transition of Thin-Walled Circular Columns Under Axial Compression”, International Journal of Mechanical Science, submitted.
2.Fan Yang, Minglu Wang, Mohamed Hassan, Shaker A. Meguid, A. M. S. Hamouda, “Effect of interfacial friction and fold penetration on the progressive collapse of foam-filled frustum using kinematically admissible model”, International Journal of Crashworthiness, 2018. DOI: 10.1080/**.2018.**.
3.Fan Yang, Shaker A. Meguid, A. M. S. Hamouda, “Kinematically admissible folding mechanisms: for the progressive collapse of foam filled conical frusta”, International Journal of Mechanics and Materials in Design, Vol. 14, pp. 105–126, 2018.
4.H Fan, Y Luo, Fan Yang, W Li, “Approaching perfect energy absorption through structural hierarchy”, International Journal of Engineering Science, Vol. 130, pp. 12-32, 2018.
5.杨帆, 刘亚平, 聚合物整体灌装电路板热应力分析, 电子器件, Vol. 41(6), 2018.
6.刘亚平, 杨帆, 基于细观力学方法的底部充填封装芯片接合层的热应力计算, 力学季刊, Vol. 39(1), pp. 39-48, 2018.
7.Zhe Li, Fan Yang, “Grain rotations during uniaxial deformation of gradient nano-grained metals using crystal plasticity finite element simulations”, Extreme Mechanics Letters, Vol. 16, pp. 41–48, 2017.
8.Jianhua Tong, Fan Yang, Xin Li, X Xu, GX Wang, “Mechanical Characterization and Material Modeling of Diabetic Aortas in a Rabbit Model”, Annals of Biomedical Engineering, Vol. 46, pp. 1-14, 2017.
9.Fan Yang, Yukui Gao, “Predicting the peen forming effectiveness of Ti-6Al-4V strips with different thicknesses using realistic finite element simulations. Journal of Engineering Materials and Technology”, Vol. 138(1), pp. 011004, 2016.
10.SA Meguid, F Yang, P Hou, “Crush behaviour of foam-filled thin-walled conical frusta: analytical, numerical and experimental studies”, Acta Mechanica, Vol. 227(12), pp. 3391-3406, 2016.
11.黄河, 杨帆, 高玉魁, 喷丸除锈过程及效果的数值模拟研究表面技术, Vol. 45(11): 194-201, 2016.
12.Fan Yang, Zheng Zhong, “On the energy conservation during the active deformation in molecular dynamics simulations”, Journal of Mechanics and Physics in Solids, Vol. 77, pp. 146-157, 2015.
13.Fan Yang, Zhuo Chen, Shaker A. Meguid, “Effect of initial surface finish on effectiveness of shot peening treatment using enhanced periodic cell model”, International Journal of Mechanics and Materials in Design, Vol. 11(4), pp. 463-478, 2015.
14.SA Meguid, F Yang, P Verberne, “Progressive collapse of foam-filled conical frustum using kinematically admissible mechanism”, International Journal of Impact Engineering, Vol. 82, pp. 25-35, 2015.
15.Z Chen, F Yang, SA Meguid, “Multi-level modeling of woven glass/epoxy composite for multilayer printed circuit board applications”, International Journal of Solids and Structures, Vol. 51(21-22), pp. 3679-3688, 2014.
16.Z Chen, F Yang, SA Meguid, “Realistic finite element simulations of arc-height development in shot-peened Almen strips”, ASME Journal of Engineering Materials and Technology, Vol. 136(4), pp. 041002, 2014.
17.SA Meguid, Z Chen, F Yang, “Effective mitigation of shock loads in embedded electronic packaging using bilayered potting materials”, ASME Journal of Electronic Packaging, Vol. 136(4), pp. 041005, 2014.
18.Fan Yang, Zhuo Chen, Shaker A. Meguid, “3D FE modeling of oblique shot peening using a new periodic cell”, International Journal of Mechanics and Materials in Design, Vol. 10(2), pp. 133-144, 2013,
19.Fan Yang, Shaker A. Meguid, “Efficient multi-level modeling technique for determining effective board drop reliability of PCB assembly”, Microelectronics Reliability, Vol. 53(7), pp. 975-984, 2013,
20.Na Zhang#, Fan Yang#, Changyu Shen, Jose Castro, James L. Lee, “Particle erosion on carbon nanofiber paper coated carbon fiber/epoxy composites”, Composites part B, Vol. 54, pp. 209-214, 2013.
21.Na Zhang#, Fan Yang#, Dante Guerra, Changyu Shen, Jose Castro, James L. Lee, “Enhancing particle erosion resistance of glass-reinforced polymeric composites using carbon nanofiber-based nanopaper coatings”, Journal of Applied Polymer Science, Vol. 129(4), pp. 1875-1881, 2013.
22.Na Zhang#, Fan Yang#, Lei Li, Changyu Shen, Jose Castro, James L. Lee, “Thickness effect on particle erosion resistance of thermoplastic polyurethane coating on steel substrate”, Wear, Vol. 303(1-2), pp. 49-55, 2013,
23.Fan Yang, Somnath Ghosh, James L. Lee, “Molecular dynamics based size and rate dependent constitutive model of polystyrene thin films”, Computational Mechanics, Vol. 50(2), pp. 169-184, 2012.
24.Fan Yang, Wei Yang, “Crack growth versus blunting in nanocrystalline metals with extremely small grain size”, Journal of Mechanics and Physics in Solids, Vol. 57(2), pp. 305-324, 2009.
25.Fan Yang, Wei Yang, “Kinetics and size effect of grain rotations in nanocrystals with rounded triple junctions”, Scripta Materialia, Vol. 61(9), pp. 919-922, 2009.
26.Fan Yang, Wei Yang, “Brittle versus ductile transition of nanocrystalline metals”, International Journal of Solids and Structures, Vol. 45(13), pp. 3897-3907, 2008.
27.Xiangming Zhang, Nianke Ma, Fan Yang, Zhenhai Li, Wei Yang, “Experimental measurements of the biomechanical properties of cardiac tissues”, Journal of Tsinghua University (Science and Technology), Vol. 46(11):1941-1948, 2006.
28.杨帆, 杨卫, 从苍蝇与物面的触粘看尺度效应力学与实践, 04, pp. 12-14, 2004.

专利和软件著作权/Patens and Software：
1.杨帆，童建华，刘亚平， 李哲, 一种多管组合式缓冲防撞装置, 发明专利, 3.8
2.杨帆，李哲，刘亚平, 统计模拟过程中体积去除量的有限元后处理软件V1.0, 软件著作权，软著登字**号, 2017.02.10
3.杨帆，李哲，刘亚平, 统计界面损失比率的有限元后处理软件V1.0, 软件著作权，软著登字**号, 2017.02.10
4.杨帆，统计ABAQUS结果场变量沿指定方向分布的平均值和标准方差软件，软件著作权，软著登字**号, 2016.06.30
5.杨帆，基于变形过程中能量守恒原理对LAMMPS源代码的修正软件，软件著作权，软著登字**号, 2016.06.30
6.杨帆，无定形态聚苯乙烯高分子模拟构型生成软件，软件著作权，软著登字**号, 2016.06.30
7.杨帆，高玉魁，黄河，统计指定表面粗糙度的有限元后处理软件，软件著作权，软著登字**号, 2016.03.16
8.杨帆，高玉魁，黄河，指定线、面或体积区域灵活提取结果场变量的有限元后处理软件，软件著作权，软著登字**号, 2016.03.17
9.杨帆，李哲，分子动力学系统的分层均方位移和平均位移计算软件，软件著作权，软著登字**号, 2016.03.17

科研项目主持/Projects：
1. 广义喷丸法生成的梯度纳晶金属的断裂行为的建模与模拟研究，国家自然科学基金面上项目，**，2018/01-2021/12。
2. 聚合物充填处理的电路板在热力载荷下的失效研究，国家自然科学基金青年科学基金项目，**，2015/01-2017/12。
3. 喷丸表面处理有效性和可靠性的机理研究，上海市教委科研创新项目，15zz018， 2015/01-2016/12。
4. 同济大学英才计划优青项目，**,2014/09-2016/08。

教改项目和教改论文/ Educational reform projects：
1.软件应用类课程的教学方法探索与实践，同济大学航力学院教改项目，2017/01-2018/12
2.杨帆，王莉华，赵金峰，工程软件应用类课程的多元化开放式考核方式设计与研究，教育教学论坛，2018
3.杨帆，赵金峰，王莉华，浅谈工科专业工程软件应用类课程的教学方法——基于同济大学CAD/CAE课程教学实践的思考，当代教育实践与教学研究，2018

校内外学术兼职/ Appointments：
上海市力学学会固体力学专业委员会秘书长/ Secretariat of Shanghai Specialized Committee of Solid Mechanics
中国机械工程学会表面工程分会表层改性专业技术委员会副秘书长/ Vice Secretariat of Specialized Committee of Surface Modification of China Mechanical Engineering Association
航力学院学位审核秘书/
《Journal of Thermal Stresses》编委/ Editorial Board of Journal of Thermal Stresses
《力学季刊》编辑/ Editor Assistant of Chinese Quarterly of Mechanics

其他/Other Activities：
获得上海市力学学会2017年度优秀青年****奖，同济大学2017年度荣泰航天健康奖教金。
担任多个国际会议分会场主席/ Session Chair of International Conferences：
1.6th International Conference on Integrity - Reliability – Failure (IRF), Lisbon, Portugal, 2018
2.7th International Conference on Mechanics and Materials in Design (M&MD), Algarve, Portugal, 2017
3.25th International Conference on Composites and Nano (ICCE), Rome, Italy, 2017
4.5th International Conference on Integrity - Reliability – Failure (IRF), Porto, Portugal, 2016

担任多个国际期刊审稿人/Reviewer of international journals：
Journal of Thermal Stresses, Acta Mechanica, Composites part B, Applied Mathematics and Mechanics, International Journal of Mechanics and Materials in Design, etc.