暂无信息
基本信息
姓名:崔俊佳
系别:机械制造工程系
职称/职务:教授,博士生导师
E-mail: cuijunjia@hnu.edu.cn
湖南大学教授、博士生导师,汽车车身先进设计制造国家重点实验室固定成员,中国机械工程学会塑性工程分会高速成形技术委员会副主任,面向汽车和航空航天等行业需求,开展先进轻量化制造技术研究,发表学术论文100余篇,获得国家发明专利13项,软件著作权3项;主持的科研项目合同总经费为500余万元,研究成果在沈飞、首都航天机械、上汽通用五菱、南京云海特种金属、上海宇航系统工程研究所、湖北博士隆、湖北回天新材、华菱涟源钢铁等企业推广应用,产值效益达1200万元,牵头制定首都航天机械有限公司企业工艺规范4项。
教育背景
2002-2006,哈尔滨工业大学,材料成型及控制工程专业,学士。
2006-2008,哈尔滨工业大学,材料加工工程专业,硕士。
2008-2012,哈尔滨工业大学,材料加工工程专业,博士。
工作履历
2013/05-2017/01,湖南大学机械与运载工程学院,助理教授,硕士生导师;
2017/01-2020/12,湖南大学机械与运载工程学院,副教授,博士生导师;
2021/01-至今,湖南大学机械与运载工程学院,教授,博士生导师;
学术兼职
一、国内外学术组织兼职情况
1. 中国机械工程学会塑性工程分会高速成形技术委员会副主任
2. 中国机械工程学会塑性工程分会塑性理论论坛学术委员会委员
3. 中国机械工程学会塑性工程分会绿色成形制造技术论坛学术委员会委员
二、担任国内外期刊编委及审稿人
1. 《Journal of Materials New Horizons》、《材料科学》期刊编委
2. 《精密成形工程》期刊通讯编委
3. 《中南大学学报(自然科学版)》青年编委
4. 《Current Chinese Engineering Science》期刊副编委
5. 《Coatings》特刊客座编辑
6. 《Applied Physics Letters》、《Journal of Materials Processing Technology》、《Materials & Design》、《Journal of Cleaner Production》、《International Journal of Fatigue》等20余个行业权威SCI期刊审稿人
研究领域
航空航天先进制造装备开发、新能源汽车高强轻质结构设计开发、动力电池智能制造技术
科研项目
一、纵向课题
[1] 铝合金-碳纤维薄壁管件电磁翻孔连接机理及失效行为研究;国家自然科学基金-面上项目;
[2] 高强钢板热冲压三维成形极限图的构建理论与应用研究;国家自然科学基金-青年科学基金项目;
[3] 异种金属管件磁脉冲焊接机理与接头性能研究;国家自然科学基金-青年科学基金项目;
[4] 车身铝合金/碳纤维材料磁脉冲连接结构与工艺研究;省自然科学基金-优秀青年基金;
[5] 高强钢板热变形行为研究及失效准则的建立;省自然科学基金-青年基金;
[6] 复杂形状铝合金车身件复合成形关键技术研究;湖南省重点研发计划子课题;
[7] 高强钢板热冲压件精确控形与控性;重庆理工大学开放基金;
[8] 铝合金-钢管件异种材料磁脉冲焊接性能及界面行为研究;哈尔滨工业大学开放基金;
[9] 3A21铝合金-20#钢管件磁脉冲连接机理及界面特性研究;华中科技大学开放基金;
[10]铝/钛板件磁脉冲固相扩散焊接机理与接头特性研究;西北工业大学开放基金;
二、企业横向课题
[1] 胶粘剂在轻量化车身上的测试应用;湖北回天新材料股份有限公司;
[2] 轻量化粘接工艺在车身上的应用研究;上汽通用五菱汽车股份有限公司;
[3] 汽车用钢高速拉伸性能研究;湖南华菱涟源钢铁有限公司;
[4] 汽车用钢安全碰撞性能检测分析;湖南华菱涟源钢铁有限公司;
[5] 汽车车身胶接样件性能评价方案研究;湖北回天新材料股份有限公司;
[6] 新型电磁铆接工艺关键技术及铆接装备研究;湖北博士隆科技股份有限公司;
[7] 超大直径舱段铆接装配仿真及变形分析;首都航天机械有限公司;
[8] 电磁脉冲材料成型典型样件制备;哈工大机器人(岳阳)军民融合研究院;
[9] 胶粘结构件复杂服役性能研究;湖北回天新材料股份有限公司;
[10]密封电磁铆接接头性能分析;首都航天机械有限公司;
[11]重型XXXX舱段装配偏差分析及容差分配;首都航天机械有限公司;
[12]多材料汽车管件结构复合连接性能研究;湖北回天新材料股份有限公司;
[13]122毫米XX电涡流制退机研究;南京理工大学。
学术成果
一、近五年来发表的期刊论文
2021年:
[1] Dongying Dong, Shuo Fu, Hao Jiang, Guangyao Li, Junjia Cui*. Study on the compaction characteristics of CNTs/TC4 composites based on electromagnetic warm compaction, Journal of Alloys and Compounds. 2021, 857.
[2]Da Cai, Jie Liang, Hang Ou, Guangyao Li,Junjia Cui*. Mechanical properties and joining mechanism of electrohydraulic expansion joints for 6063 aluminum alloy/304 stainless steel thin-walled pipes. Thin-Walled Structures, 161: 107427, 2021.
[3] Liming Duan, Xuerui Feng, Junjia Cui, Guangyao Li, Hao Jiang*. Effect of angle deflection on deformation characteristic and mechanical property of electromagnetic riveted joint[J]. The International Journal of Advanced Manufacturing Technology, 112, 3529–3543(2021).
[4]Chenguang Wang, Quanxiaoxiao Liu, Guangyao Li, Junjia Cui*. Study on mechanical properties and microstructural feature of magnetic pulse welding joint between Cu and Al sheets. The International Journal of Advanced Manufacturing Technology. 113, pages1739–1751(2021).
[5]Hang Ou, Shijin Sun, Panfeng Li, Guangyao Li, Junjia Cui*. A dynamic small-size hole flanging process driven by Lorentz-force for aluminum alloys. International Journal of Material Forming. 2021: 1-12.
2020年:
[1] Junjia Cui, Liang Ye, Congcong Zhu, Huihui Geng, Guangyao Li*. Mechanical and Microstructure Investigations on Magnetic Pulse Welded Dissimilar AA3003-TC4 Joints. J. of Materi Eng and Perform 29, 712–722 (2020).
[2] Junjia Cui*, Xushi Huang, Dongying Dong, Guangyao Li. Effect of Discharge Energy of Magnetic Pulse Compaction on the Powder Compaction Characteristics and Spring Back Behavior of Copper Compacts. Met. Mater. Int. (2020). doi.org/10.1007/s12540-020-00698-6
[3] Shuaishuai Yang, Liqiang Sun, Huakun Deng, Guangyao Li, Junjia Cui*.A modified Johnson-Cook model of AA6061-O aluminum alloy with quasi-static pre-strain at high strain rates. Int J Mater Form (2020). https://doi.org/10.1007/s12289-020-01556-x
[4] Junjia Cui, Bingkun Li, Hao Jiang, Guangyao Li*. Numerical and experimental study on high-speed nailing process for aluminum/steel structures induced by electromagnetic impact. Archiv.Civ.Mech.Eng (2020), 20, 55.
[5] Junjia Cui, Shaoluo Wang, Wei Yuan, Guangyao Li*. Effects of Standoff Distance on Magnetic Pulse Welded Joints Between Aluminum and Steel Elements in Automobile Body. Automot. Innov. 3, 231–241 (2020).
[6] Shaoluo Wang, Wei Liang, Liming Duan1, Guangyao Li, Junjia Cui*, Effects of loading rates on mechanical property and failure behavior of single-lap adhesive joints with carbon fiber reinforced plastics and aluminum alloys.The International Journal of Advanced Manufacturing Technology 106:2569–2581 (2020)
[7] Huakun Deng, Shuaishuai Yang, Guangyao Li, Xu Zhang, Junjia Cui*. Novel method for testing the high strain rate tensile behavior of aluminum alloys. Journal of materials processing tech. 208(2200): 116601
[8] Qin Yangfan, Jiang hao, Cong Yanjun, Li Guangyao, Qi Lin, Cui Junjia*. Rivet die design and optimization for electromagnetic riveting of aluminium alloy joints. Engineering optimization. Doi: https://doi.org/10.1080/**X.2020.**
[9] Junjia Cui, Song Gao, Hao Jiang, Xiaodong Huang , Guoxing Lu , Guangyao Li*. Adhesive bond-electromagnetic rivet hybird joining technique for CFRP/Al structure: process, design and property. Composite Structures, 2020,244:112316
[10]Junjia Cui, Shuhao Wang, Shaoluo Wang, Shuochen Chen, Guangyao Li*. Strength and failure analysis of adhesive single-lap joints under shear loading: Effects of surface morphologies and overlap zone parameters. Journal of Manufacturing Processes.56:238-247(2020).
[11]Shaoluo Wang, Binbin Zhou, Xu Zhang, Tao Sun, Guangyao Li, Junjia Cui*, Mechanical properties and interfacial microstructures of magnetic pulse welding joints with aluminum to zinc-coated steel. Materials Science and Engineering: A 788(2020), 139425.
[12]Shaoluo Wang,Jiabao Zhong,Yongqiang Gu,Guangyao Li,Junjia Cui*,Mechanical properties, flame retardancy, and thermal stability of basalt fiber reinforced polypropylene composites.Polymer Composites.41:4181-4191(2020)
[13]Junjia Cui, Hui Liao, Liming Duan, Hao Jiang, Guangyao Li*. Experimental investigation on electromagnetic punching process of hybrid CFRP/Al stacks under different discharge energies. Thin-Walled Structures, 2020, 153: 106789
[14] Dongying Dong, Xushi Huang, Guangyao Li, Junjia Cui*. Study on mechanical characteristics, microstructure and equation of copper powder compaction based on electromagnetic compaction. Materials Chemistry and Physics. https://doi.org/10.1016/j.matchemphys.2020.123449
[15] Liming Duan, Hao Jiang, Xu Zhang, Guangyao Li, Junjia Cui*. Experimental investigations of electromagnetic punching process in CFRP laminate. Materials and Manufacturing Processes. https://doi.org/10.1080/**.2020.**
[16]Dongying Dong, Xushi Huang, Junjia Cui, Guangyao Li, Hao Jiang*. Effect of aspect ratio on the compaction characteristics and micromorphology of copper powders by magnetic pulse compaction[J]. Advanced Powder Technology, 2020: 1-11.
[17]Junjia Cui, Shaoluo Wang,Wei Yuan, Guangyao Li. Effect of Standoff Distance on Magnetic Pulse Welded Joints Between Aluminum and Steel Elements in Automobile Body. Automotive Innovation. https://doi.org/10.1007/s42154-020-00104-2.
[18]Hao Jiang, Chaochao Zeng, Guangyao Li,Junjia Cui*. Effect of locking mode on mechanical properties and failure behavior of CFRP/Al electromagnetic riveted joint. Composite Structures.2020, 257:113162.
[19]Shaoluo Wang, Liwang Xu, Tao Sun, Guangyao Li, Junjia Cui*. Effects of process parameters on mechanical performance and interfacial morphology of electromagnetic pulse welded joints between aluminum and galvanized steel, Journal of Materials Research and Technology, 2020, 10: 552-564.
2019年:
[1] Jusong Liang, Hao Jiang, Jinsheng Zhang, Xianhe Wu, Xu Zhang, Guangyao Li, Junjia Cui*. Investigations on mechanical properties and microtopography of electromagnetic self-piercing riveted joints with carbon fiber reinforced plastics/aluminum alloy 5052. Archiv.Civ.Mech.Eng 19, 240–250 (2019).
[2] Huihui Geng, Jingqi Mao, Zhang, Xu, Guangyao Li, Junjia Cui*. Strain rate sensitivity of Al-Fe magnetic pulse welds. Journal of Materials Processing Technology. 2018, 262: 1-10.
[3] Huakun Deng, Yunfei Mao, Guangyao Li, Junjia Cui*. A study of electromagnetic free forming in AA5052 using digital image correlation method and FE analysis. Journal of Manufacturing Processes. 2019, 37: 595-605.
[4] Huihui Geng, Liqiang Sun, Guangyao Li, Junjia Cui*, Liang Huang, Zhidan Xu. Fatigue fracture properties of magnetic pulse welded dissimilar Al-Fe lap joints. International Journal of Fatigue, 2019, 121: 146-154.
[5] Congcong Zhu, Liqiang Sun, Wenli Gao, Guangyao Li, Junjia Cui*. The effect of temperature on microstructure and mechanical properties of Al/Mg lap joints manufactured by magnetic pulse welding. Journal of materials research and technology. 2019, 8(3): 3270-3280.
[6] Huihui Geng, Jingqi Mao, Xu Zhang, Guangyao Li, Junjia Cui*. Formation mechanism of transition zone and amorphous structure in magnetic pulse welded Al-Fe joint. Materials letters. 2019, 245: 151-154.
[7] Hang Ou, Yuhua Yang, Ming Hu, Guangyao Li, Junjia Cui*. Forming study on a tailor rolled blank (TRB) structure- Formability evaluation and model verification. Journal of Manufacturing Processes, 2019, 44: 397-407.
[8] Dongying Dong, Liqiang Sun, Qiong Wang, Guangyao Li, Junjia Cui*. Influence of electromagnetic riveting process on microstructures and mechanical properties of 2A10 and 6082 Al riveted structures. Archives of Civil and Mechanical Engineering, 2019, 4: 1284-1294.
[9] Dingchen Peng, Quanxiaoxiao Liu, Guangyao Li, Junjia Cui*. I nvestigation on hybrid joining of aluminum alloy sheets: magnetic pulse weld bonding. Int J Adv Manuf Technol 104, 4255–4264 (2019).
[10]Dongying Dong, Liqiang Sun, Qiong Wang, Guangyao Li, Junjia Cui*. Influence of electromagnetic riveting process on microstructures and mechanical properties of 2A10 and 6082 Al riveted structures. Archiv.Civ.Mech.Eng 19, 1284–1294 (2019).
[11]Dingchen Peng, Quanxiaoxiao Liu, Guangyao Li, Junjia Cui*. Investigation on hybrid joining of aluminum alloy sheets: magnetic pulse weld bonding. The International Journal of Advanced Manufacturing Technology, 2019, 104, 4255–4264.
[12] Hao Jiang, Yanjun Cong, Jinsheng Zhang, Xianhe Wu, Guangyao Li, Junjia Cui*. Fatigue response of electromagnetic riveted joints with different rivet dies subjected to pull-out loading. International Journal of Fatigue, 2019, 129: 105238.
[13] Hao Jiang, Song Gao, Guangyao Li, Junjia Cui*. Structural design of half hollow rivet for electromagnetic self-piercing riveting process of dissimilar materials. Materials & Design, 2019, 183: 108141.
[14] Hao Jiang, Liqiang Sun, Jusong Liang, Guangyao Li, Junjia Cui*. Shear failure behavior of CFRP/Al and steel/Al electromagnetic self-piercing riveted joints subject to high-speed loading. Composite Structures, 2019, 230: 111500.
[15] Junjia Cui, Ya Li, Quanxiaoxiao Liu, Xu Zhang, Zhidan Xu, Guangyao Li, Joining of tubular carbon fiber-reinforced plastic/aluminum by magnetic pulse welding, Journal of Materials Processing Tech. 2019, 264: 273-282.
[16] Junjia Cui, Qiong Wang, Dongying Dong, Hao Jiang, Xu Zhang, Guangyao Li. A study on the constitutive equation of HC420LA steel subjected to high strain rates. Journal of Materials Research. 2019, 1034-1042.
[17]Jusong Liang, Hao Jiang, Jinsheng Zhang, Xianhe Wu, Xu Zhang, Guangyao Li, Junjia Cui*. Investigations on mechanical properties and microtopography of electromagnetic self-piercing riveted joints with carbon fiber reinforced plastics/aluminum alloy 5052. Archives of civil and mechanical engineering. 2019, 19: 240-250.
[18] Hao Jiang, Liqiang Sun, Dongying Dong, Guangyao Li, Junjia Cui*. Microstructure and mechanical property evolution of CFRP/Al electromagnetic riveted lap joint in a severe condition. Engineering Structures, 2019, 180: 181-191.
[19]Junjia Cui, Chaochao Zeng, Hao Jiang, Guangyao Li*. Flat Spiral Coil Design for Higher Riveting Force and Energy Saving in the Electromagnetic Riveting Process. Journal of Manufacturing Science and Engineering, 2019, 141: 101014.
[20]Junjia Cui, Shaoluo Wang, Shuhao Wang, Guangyao Li*, Peilin Wang and Chengsong Liang, The Effects of Strain Rates on Mechanical Properties and Failure Behavior of Long Glass Fiber Reinforced Thermoplastic Composites. Polymers 2019, 11, 2019;
2018年:
[1] Junjia Cui, Lin Qi, Hao Jiang, Guangyao Li, Xu Zhang*. Numerical and experimental investigations in electromagnetic riveting with different rivet dies. Int J Mater Form 11, 839–853 (2018). https://doi.org/10.1007/s12289-017-1394-z
[2] Jiang Hao, Cong Yanjun, Zhang Xu, Li Guangyao, Cui Junjia*. Fatigue degradation after salt spray ageing of electromagnetically riveted joints for CFRP/Al hybrid structure, Materials & Design. 2018, 142: 297-307.
[3] Hang Ou, Xu Zhang, Junrui Xu, Guangyao Li, Junjia Cui*. Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process. J. of Materi Eng and Perform 27, 4025–4035 (2018). https://doi.org/10.1007/s11665-018-3290-1
[4] Huihui Geng, Zehua Xia, Xu Zhang, Guangyao Li,Junjia Cui*. Microstructures and mechanical properties of the welded AA5182/HC340LA joint by magnetic pulse welding. Materials Characterization, 2018, 138: 229-237.
[5] Junjia Cui, Dongying Dong, Xu Zhang, Xiaodong Huang, Guoxing Lu, Hao Jiang, Guangyao Li*. Influence of thickness of composite layers on failure behaviors of carbon fiber reinforced plastics/aluminum alloy electromagnetic riveted lap joints under high-speed loading. International Journal of Impact Engineering. 2018, 115: 1-9.
[6] Junjia Cui, Tao Sun, Huihui Geng, Wei Yuan, Guangyao Li, Xu Zhang*. Effect of surface treatment on the mechanical properties and microstructures of Al-Fe single-lap joint by magnetic pulse welding. Int J Adv Manuf Technol 98, 1081–1092 (2018).
[7] 陈硕琛,李光耀,崔俊佳*. 表面处理对汽车车身用5182铝合金胶粘接头性能的影响. 汽车工程. 2018, 40(7): 865-870.
[8] Hang Ou, Xu Zhang, Junrui Xu, Guangyao Li, Junjia Cui*. Mechanical Properties and Microstructure of High-Strength Steel Controlled by Hot Stamping Process, Journal of Materials Engineering & Performance, 2018, 1, 1-11.
[9] Chunhong Tang, Hao Jiang, Xu Zhang, Guangyao Li, Junjia Cui*. Corrosion Behavior and Mechanism of Basalt Fibers in Sodium Hydroxide Solution. Materials. 2018, 11, 1381.
[10]Junjia Cui, Tao Sun, Huihui Geng, Wei Yuan, Guangyao Li, Xu Zhang*. Effect of surface treatment on the mechanical properties and microstructures of Al-Fe single-lap joint by magnetic pulse welding. International Journal of Advanced Manufacturing Technology. 2018, 98(5-8): 1081-1092.
[11]Junjia Cui, Lin Qin, Hao Jiang, Guangyao Li, Xu Zhang*. Numerical and experimental investigations in electromagnetic riveting with different rivet dies. International Journal of Material Forming. 2018, 11(6): 839-853.
2017年:
[1] 崔俊佳,胡明,李光耀.汽车零部件热成形极限裕度云图的构建与应用[J].中国机械工程,2017,28(03):358-365.
[2] Hao Jiang, Tong Luo, Guangyao Li, Xu Zhang, Junjia Cui*. Fatigue life assessment of electromagnetic riveted carbon fiber reinforce plastic/aluminum alloy lap joints using Weibull distribution. International Journal of Fatigue, 2017, 105: 180-189.
[3] Hao Jiang, Guangyao Li, Xu Zhang, Junjia Cui*. Fatigue and failure mechanism in carbon fiber reinforced plastics/aluminum alloy single lap joint produced by electromagnetic riveting technique. Composites Science and Technology, 2017, 152: 1-10.
[4] Junjia Cui, Hao Jiang, Huihui Geng, Quanxiaoxiao Liu, and Guangyao Li*. Research on magnetic pulse technology for joining dissimilar materials in lightweight automobile bodies in Reimagining new energy vehicles: Research innovations at Tongji University. (Science/AAAS, Washington, DC, 2017), p. 21-22.
二、发明专利
[1] 发明专利;一种基于电磁成形技术的复合波纹管及其成形装置;
[2] 发明专利;一种基于电液成形的层合板的成形装置和方法;
[3] 发明专利;一种手持式电磁铆枪的减震隔振系统;
[4] 发明专利;一种高强钢板热成形极限图的建立方法;
[5] 发明专利;一种无铆钉铆接柔性化模具集成装置;
[6] 发明专利;一种无头铆钉双侧加载磁脉冲铆接装置;
[7] 发明专利;一种用于磁脉冲焊接的圆管对心柔性夹具;
[8] 发明专利;一种电磁脉冲径向粉末压实装置和压实方法;
[9] 发明专利;一种金属板材高速成形极限实验装置;
[10]发明专利;一种金属板材高速成形极限图的建立方法;
[11]发明专利;试验方法及基于该方法的热成形起皱极限面的建立方法;
[12]发明专利;一种汽车零部件热冲压破裂性能的评价方法;
[13]发明专利;一种波纹管成形装置及用该装置加工的波纹管;
[14]软件著作;自动化铆接平台1.0;
[15]软件著作;智能化电磁铆接平台1.0;
[16]软件著作;基于电磁力驱动的自动铆接系统1.0;
奖励与荣誉
一、获奖情况
[1] 获Advanced In Engineering材料类关键科学国际论文奖;排名1;
[2] 获Advanced In Engineering制造类关键科学国际论文奖;排名1;
[3] 获首届新能源汽车技术(轻量化)创新拉力赛二等奖;排名1;
二、国际会议
2018年12月3日于韩国济州岛在第十四届亚太工程塑性及其应用国际研讨会上作大会报告,崔俊佳教授是6场大会报告中唯一的中国嘉宾,其余5位参与大会报告的嘉宾均是来自世界各地的塑性工程研究领域的顶级专家:澳大利亚Deakin University副校长Peter Hodgson教授、韩国汽车工程学会院长Hoon Huh教授、美国洛杉矶Los Alamos国家实验室的高级科学家Ricardo Lebensohn、美国通用汽车研发部Thomas B. Stoughton博士和日本广岛大学Fusahito Yoshida教授。该次会议共有来自希腊、德国、新加坡、澳大利亚、英国、美国 、日本、韩国及中国香港等20多个国家和地区以及国内高校、科研院所等近300名专家参加了会议。
招生信息:
团队长期招生,每年招收车辆工程、机械工程及工业工程的硕士生共10名,博士生1-2名,985高校直接攻读博士生名额不限。
删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
湖南大学机械与运载工程学院导师教师师资介绍简介-崔俊佳
本站小编 Free考研考试/2021-08-18
相关话题/工程学院 机械
湖南大学机械与运载工程学院导师教师师资介绍简介-彭杰宏
基本信息姓名:彭杰宏系别:机械制造系职称职务:助理教授、硕士生导师E-mail:@qq.com教育背景教育背景:2013年10月—2016年09月,东京工业大学,精密工学研究所,工学博士2010年09月—2013年06月,湖南大学,机械与运载工程学院,机械工程,工学硕士2006年09月—2010年0 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-梁军
暂无信息基本信息暂无信息 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-熊万里
暂无信息基本信息姓名:熊万里系别:机械制造工程系、国家高效磨削工程中心职称/职务:教授、博士生导师、总工程师办公电话:(邮件优先)E-mail:wan369@vip.sina.com(欢迎推免生和考生联系!来信必复!津贴从优!)工学博士,教授,机械与运载工程学院博士生导师,国家高效磨削工程中心总工程 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-鄢锉
暂无信息基本信息姓名:鄢锉性别:男出生年月:1970.1民族:汉政治面貌:中共党员职称:副教授,硕士生导师毕业院校:湖南大学所学专业:机械制造及其自动化学历:博士学位:博士工作单位:湖南大学机械与运载工程学院/机器人学院通讯地址:湖南大学机械与运载工程学院邮政编码:410082传真:电子邮箱:cuo ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-陈聪
陈聪,男,湖南大学助理教授。2011年本科毕业于武汉理工大学材料成型及控制工程专业,2017年获华中科技大学工学博士学位,2017-2019年在武汉光电国家研究中心从事博士后研究工作。主要研究方向为智能化激光焊接/切割工艺及装备、激光加工过程监测技术、激光-电弧复合增材工艺与机理。近年来在Inter ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-韩晓筱
暂无信息基本信息姓名:韩晓筱系别:机械工程及自动化职称/职务:教授/博导,岳麓****Email:xiaoxiaohan@hnu.edu.cn通信地址:CollegeofMechanicalandVehicleEngineeringHunanUniversityChangsha410082教育背景北 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-尹辉
1990年8月出生,湖南大学机械与运载工程学院助理教授,岳麓****(晨星岗)。长期从事复杂机械系统与机器人运动算法研究,特别针对在结构化/非结构化、难预测且与人共融环境中的机器人运动问题,发展具有性能保障的运动规划、控制、优化以及学习算法。以第一或通讯作者发表在本领域顶级SCI/EI期刊《IEEE ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-何洪
暂无信息基本信息姓名:何洪系别:机械制造工程系职称/职务:副教授办公电话:移动电话:137-8713-2870E-mail:hehong_hnu@hnu.edu.cn欢迎优秀学子报考机械工程/汽车工程专业研究生。教育背景2005年6月,南京航空航天大学,材料科学与技术学院,学士学位2010年6月,南 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-韦凯
暂无信息基本信息姓名:韦凯系别:工程力学系职称/职务:副教授,博士生导师,力学系副主任,岳麓****E-mail:weikai@hnu.edu.cn研究生招生:培养研究生多人获得CSC资助和国外学校全奖,前往英国、加拿大等攻读博士学位,或进入双一流高校攻读博士学位。指导研究生多人次获“研究生国家奖学 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18湖南大学机械与运载工程学院导师教师师资介绍简介-王晓钢
暂无信息基本信息姓名:王晓钢系别:工程力学系职称/职务:副教授E-mail:xgwang@hnu.edu.cn王晓钢,男,1983年生,河南安阳人,湖南大学机械与运载工程学院副教授,担任英国机械工程师学会会刊JournalofMechanicalEngineeringScience副主编,中国材料研 ...湖南大学师资导师 本站小编 Free考研考试 2021-08-18