Influence of SBS modifiers on viscoelastic mechanical behavior of modified asphalt
MENG Yong-jun1, ZHANG Xiao-ning2, LU Yan-qiu3
1.School of Science and Engineering on Communication,Harbin Institute of Technology,Harbin 150090,China;2.College of Traffic and Communications,South China University of Technology,Guangzhou 510641,China;3.Shenzhen Municipal Engineering Design Institute,Shenzhen 518035,China
Abstract:
In order to verify the influence of different block proportions S/B on the effect of SBS modified asphalt,the dynamic mechanical performance test and static loading test were performed on the samples composed of different kinds of SBS with base asphalt. It is found that different S/B values fix on different modified effects and different viscoelastic mechanical behaviors,due to biphasic separate fabric of polybutadiene and polystyrene in SBS. In low-speed running pavement,the modified asphalt with lower S/B value shows better pavement performance,while in high-speed running pavement,the modified asphalt with higher S/B value shows better pavement performance. As far as SBS modified asphalt itself is concerned,mixing proportion impacts on resisting displacement and block proportion S/B ratio impacts on strain recovery capacity. In the case that the conditions are the same,SBS modified asphalt with different S/B values can be used for different travelling speed pavement construction demands to get an intelligent use.
Key words: SBS modifier block proportion dynamic mechanical test static loading test
DOI:10.11916/j.issn.1005-9113.2010.02.002
Clc Number:U414.1
Fund:
删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
Influence of SBS modifiers on viscoelastic mechanical behavior of modified asphalt
本站小编 哈尔滨工业大学/2019-10-23
相关话题/Influence SBS modifiers viscoelastic mechanical
Influence of Si Contents on the Microstructure Evolution and Mechanical Properties of Al-Mg-Si-Cu-Zn
Influence of Si Contents on the Microstructure Evolution and Mechanical Properties of Al-Mg-Si-Cu-Zn Alloys Author NameAffiliationLiang ZhuState Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, ChinaMingxing GuoS ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2020-12-05Investigations about the Atomic Structure and Mechanical Behavior of Metallic Glasses after Melt Hyd
Investigations about the Atomic Structure and Mechanical Behavior of Metallic Glasses after Melt Hydrogenation Author NameAffiliationBinbin WangNational Key Laboratory for Precision Hot Processing of Metals, School of Materials Science and Engineering, Harbin Institute of Te ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2020-12-05Effects of Fiber Surface Pretreatment and Composite Post-treatment on Mechanical Properties of 2D-Cf
Effects of Fiber Surface Pretreatment and Composite Post-treatment on Mechanical Properties of 2D-Cf/PhosphateGeopolymer Matrix Composites Author NameAffiliationPeigang HeInstitute for Advanced Ceramics, Department of Materials Science, Harbin Institute of Technology, Harbin ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2020-12-05Influence of Skidding Operation on Forest Soil Respiration for Small Four-wheeled Tractors
Influence of Skidding Operation on Forest Soil Respiration for Small Four-wheeled Tractors De-Ling Yang1, Li-Hai Wang1, Wen-Shu Lin1, Shu-E Ji2 (1.College of Engineering and Technology, Northeast Forestry University, Harbin 1500 ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Study on Wheel and Workpiece Position Error Influence on Surface Shape Accuracy during Ceramic Ball
Study on Wheel and Workpiece Position Error Influence on Surface Shape Accuracy during Ceramic Ball Grinding Feng-Ming Nie1,2, Zhan-Guo Li1,3, Qing-Tang Wu2, Huan Wu2, Shan Li2, Bo Guo2 (1.Mechanical and Electrical Engineering C ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Effects of Quenching Process on Microstructure and Mechanical Properties of Low Carbon Nb-Ti Microal
Effects of Quenching Process on Microstructure and Mechanical Properties of Low Carbon Nb-Ti Microalloyed Steel Wen-Zhen Xia, Xian-Ming Zhao, Xiao-Ming Zhang, Di Wu (State Key Laboratory of Rolling and Automation, Northeastern U ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Mechanical and Microstructural Characteristics of Superplastic Al-4.42Mg Aluminum Alloy
Mechanical and Microstructural Characteristics of Superplastic Al-4.42Mg Aluminum Alloy Sha-Sha Zhao1, Rehan Qayyume1, Hao-Yan Diao1, Chao-Li Ma1, Xiao-Wei Wu2, Yong Wang2 (1.Key Laboratory of Aerospace Advanced Materials and P ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Fabrication and Mechanical Properties of 2024 Aluminum AlloyReinforced by FeNiCrCoAl3 High Entropy P
Fabrication and Mechanical Properties of 2024 Aluminum AlloyReinforced by FeNiCrCoAl3 High Entropy Particles Zhi-Wei Wang 1, Rui-Xiao Zheng 1, Chao-Li Ma 1, Li-Rong Hao 2, Yang Han 1 (1.Beijing University of Areonautics and Ast ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Influence of Solid Rocket Motor Slag on the Space Debris Environment
Influence of Solid Rocket Motor Slag on the Space Debris Environment Bao-Jun Pang1, Ke-Ke Peng1, Wei-Ke Xiao2, Fang-Fei Ju1, Dong-Fang Wang1 (1.Hypervelocity Impact Research Center, Harbin Institute of Technology, Harbin 150080, ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Influence of Thermal Load on Mechanical Property of Cemented Carbide Material and Heavy Cemented Car
Influence of Thermal Load on Mechanical Property of Cemented Carbide Material and Heavy Cemented Carbide Inserts Life Yao-Nan Cheng, Li Liu, Shou-Hui Sun, Jun Qian, Ya-Nan Gong, Ming-Yang Wu (Key Laboratory of National and Local ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24