删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Mechanical and Microstructural Characteristics of Superplastic Al-4.42Mg Aluminum Alloy

本站小编 哈尔滨工业大学/2019-10-24

Mechanical and Microstructural Characteristics of Superplastic Al-4.42Mg Aluminum Alloy

Sha-Sha Zhao1, Rehan Qayyume1, Hao-Yan Diao1, Chao-Li Ma1, Xiao-Wei Wu2, Yong Wang2

(1.Key Laboratory of Aerospace Advanced Materials and Performance, Ministry of Education, School of Materials Science and Engineering,Beihang University, Beijing 100191, China; 2.Beijing Research Institute of Mechenical & Electrical Technology, Beijing 100083, China)



Abstract:

The superplastic response of commercial 5083 alloy (Al-4.42Mg) under uniaxial tension at strain rates ranging from 5×10-5 to 10-2s-1 in the temperature interval 400-550 ℃ was systematically studied in this paper. The tension test was conducted on samples of rolling direction. The maximum elongation-to-failure of 486% was found at 500 ℃ and strain rate of 10-4s-1. To identify the main characteristics of superplastic deformation and to determine the mechanism of superplastic deformation of the alloy, the microstructure and fracture of the alloy were analyzed as a function of strain, strain rate and temperature using optical microscopy (OM) and scanning electron microscopy (SEM), the apparent strain rate sensitivity exponent ma and the apparent activation energy Qa were also studied. Based on the fracture analysis and the calculated data of ma and Qa, it is suggested that the dominant deformation mechanism in the present alloy is grain boundary sliding (GBS) during the best deformation condition.

Key words:  5083 alloy  superplasticity  cavity  fracture  microstructure

DOI:10.11916/j.issn.1005-9113.2013.05.017

Clc Number:TG146.2

Fund:


相关话题/Mechanical and Microstructural Characteristics Superplastic