删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Fabrication and Mechanical Properties of 2024 Aluminum AlloyReinforced by FeNiCrCoAl3 High Entropy P

本站小编 哈尔滨工业大学/2019-10-24

Fabrication and Mechanical Properties of 2024 Aluminum AlloyReinforced by FeNiCrCoAl3 High Entropy Particles

Zhi-Wei Wang 1, Rui-Xiao Zheng 1, Chao-Li Ma 1, Li-Rong Hao 2, Yang Han 1

(1.Beijing University of Areonautics and Astronautics, Beijing 100191, China; 2. Hebei Stone New Metal Material Co., Ltd, Baoding 071100, China)



Abstract:

This article mainly discussed bulk material prepared by powder metallurgy, and the commercial 2024 aluminum alloy powder and FeNiCrCoAl3 high entropy alloy powder (both produced by argon gas atomization process) were ball-milled for different hours. The prepared powder was consolidated by hot extrusion method. The microstructures of the milled powder and bulk alloy were examined by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The thermal stability was tested by differential scanning calorimetry (DSC). Mechanical properties of the extruded alloy were examined by Vickers hardness tester and mechanical testing machine. The results show that after milling, the mixed particle sizes and microstructures of the alloy powder change obviously. The compressive strength of the extruded alloy has reached 580 MPa under certain conditions of milling time and composition.

Key words:  aluminum alloy  nanocrystalline  FeNiCrCoAl3 high entroy reinforced particle  ball milling(BM)  the extruded alloy

DOI:10.11916/j.issn.1005-9113.2013.05.021

Clc Number:TG

Fund:


相关话题/Fabrication and Mechanical Properties 2024