Influence of Solid Rocket Motor Slag on the Space Debris Environment
Bao-Jun Pang1, Ke-Ke Peng1, Wei-Ke Xiao2, Fang-Fei Ju1, Dong-Fang Wang1
(1.Hypervelocity Impact Research Center, Harbin Institute of Technology, Harbin 150080, China;2. Dept. Astronautical Engineering, Harbin Institute of Technology, Harbin 150001, China)
Abstract:
The resulting slag particles from solid rocket motor (SRM) firings are an important component of space debris environment. Slag sizes as large as 1 cm have been witnessed in ground tests, and comparable sizes have been also estimated via observations of sub-orbital tail-off events. We achieve slag initial data based on MASTER slag model and SRM historical launch data, and propagate slag long-term orbital evolution taking into account the zonal harmonics J2, atmospheric drag, solar radiation pressure and luni-solar attraction to discuss the slag size distribution and orbital characteristics. Finally, future slag debris environment is evaluated based on two different launch rate assumptions. The result shows that current launch frequency will make the slag population sustain growth and the population will not decrease at once even if there are no more launches in the future.
Key words: solid rocket motor slag space debris orbital distribution spatial density
DOI:10.11916/j.issn.1005-9113.2013.06.003
Clc Number:V51
Fund:
删除或更新信息,请邮件至freekaoyan#163.com(#换成@)
Influence of Solid Rocket Motor Slag on the Space Debris Environment
本站小编 哈尔滨工业大学/2019-10-24
相关话题/Influence Solid Rocket Motor Slag
Influence of Si Contents on the Microstructure Evolution and Mechanical Properties of Al-Mg-Si-Cu-Zn
Influence of Si Contents on the Microstructure Evolution and Mechanical Properties of Al-Mg-Si-Cu-Zn Alloys Author NameAffiliationLiang ZhuState Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, ChinaMingxing GuoS ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2020-12-05Review: Research Progress for Electric Vehicle Hub Motor Driving Technology
Review: Research Progress for Electric Vehicle Hub Motor Driving Technology Author NameAffiliationJunqiu LiState Engineering Laboratory of Electric Vehicles, Beijing Institute of Technology, Beijing 100081, ChinaJiwei LiuState Engineering Laboratory of Electric Vehicles, Bei ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2020-12-05Calculation of Circumferential Modal Frequencies of Permanent Magnet Synchronous Motor
Calculation of Circumferential Modal Frequencies of Permanent Magnet Synchronous Motor Shenbo Yu, Shuangshuang Zhong, Haining Zhao, Pengpeng Xia,Kai Guo (School of Mechanical Engineering, Shenyang University of Technology, Sheny ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Calculation of Solidification Process of Continuous Cast Bar
Calculation of Solidification Process of Continuous Cast Bar A I Golodnov, R K Mysik, A V Sulitsin, S V Brusnitsyn, I A Gruzdeva (Ural Federal University, Russia, Ekaterinburg) Abstract: ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Influence of Skidding Operation on Forest Soil Respiration for Small Four-wheeled Tractors
Influence of Skidding Operation on Forest Soil Respiration for Small Four-wheeled Tractors De-Ling Yang1, Li-Hai Wang1, Wen-Shu Lin1, Shu-E Ji2 (1.College of Engineering and Technology, Northeast Forestry University, Harbin 1500 ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Inversion Methods of Optical Constants of Semitransparent Solid Materials from Transmittance Spectro
Inversion Methods of Optical Constants of Semitransparent Solid Materials from Transmittance Spectrograms Dong Li 1,2, Xin-Lin Xia 1, Qing Ai 1 (1.School of Energy Science and Engineering, Harbin Institute of Technology, Harbin ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Robust Control Strategy for the Speed Control of Brushless DC Motor
Robust Control Strategy for the Speed Control of Brushless DC Motor Zhi Liu1, Bai-Fen Liu2 (1.School of Traffic and Transportation Engineering, Central South University, Changsha 400083, China;2.School of Electrical and Electr ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Study on Wheel and Workpiece Position Error Influence on Surface Shape Accuracy during Ceramic Ball
Study on Wheel and Workpiece Position Error Influence on Surface Shape Accuracy during Ceramic Ball Grinding Feng-Ming Nie1,2, Zhan-Guo Li1,3, Qing-Tang Wu2, Huan Wu2, Shan Li2, Bo Guo2 (1.Mechanical and Electrical Engineering C ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Microstructure of the Hypoeutectic Al-Mg Alloy Solidified at 4 GPa High Pressure
Microstructure of the Hypoeutectic Al-Mg Alloy Solidified at 4 GPa High Pressure Zhen-Ling Wang1, Yu-Cheng Yu1, Zun-Jie Wei2 (1.College of Materials Science and Engineering, Heilongjiang University of Science and Technology, Ha ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24Solidification/stabilization of Dewatered Sludge with Multi-Component Solidifying Agents
Solidification/stabilization of Dewatered Sludge with Multi-Component Solidifying Agents Jun-Qiu Jiang1, Kun Wang1, Zi-Ye Li2, Yang Li1, Qing-Liang Zhao1, Guang-Yi Liu1 (1.Department of Municipal and Environmental & Engineering ...哈尔滨工业大学科研学术 本站小编 哈尔滨工业大学 2019-10-24