1.Department of Physics, Faculty of Science, University of Kurdistan, Pasdaran St. P.O. Box 66177-15175, Sanandaj, Iran 2.Department of Physics, Faculty of Science, Razi University, Kermanshah 6714967346, Iran 3.Development Center for Research and Training (DCRT), University of Human Development, Sulaimani, Kurdistan Region, Iraq 4.Department of Physics, College of Science, University of Sulaimani, Kurdistan Region, Iraq Received Date:2019-12-30 Accepted Date:2020-03-26 Available Online:2020-08-01 Abstract:A Dvali–Gabadadze–Porrati (DGP) brane-world model with perfect fluid brane matter including a Brans-Dicke (BD) scalar field on brane was utilized to investigate the problem of the quark-hadron phase (QHP) transition in early evolution of the Universe. The presence of the BD scalar field arises with several modified terms in the Friedmann equation. Because the behavior of the phase transition strongly depends on the basic evolution equations, even a small change in these relations might lead to interesting results about the time of transition. The phase transition is investigated in two scenarios, namely the first-order phase transition and smooth crossover phase transition. For the first-order scenario, which is used for the intermediate temperature regime, the evolution of the physical quantities, such as temperature and scale factor, are investigated before, during, and after the phase transition. The results show that the transition occurs in about a micro-second. In the following part, the phenomenon is studied by assuming a smooth crossover transition, where the lattice QCD data is utilized to obtain a realistic equation for the state of the matter. The investigation for this part is performed in the high and low-temperature regimes. Using the trace anomaly in the high-temperature regime specifies a simple equation of state, which states that the quark-gluon behaves like radiation. However, in the low-temperature regime, the trace anomaly is affected by discretization effects, and the hadron resonance gas model is utilized instead. Using this model, a more realistic equation of state is found in the low-temperature regime. The crossover phase transition in both regimes is considered. The results determine that the transition lasts around a few micro-seconds. Further, the transition in the low-temperature regime occurs after the transition in the high-temperature regime.
HTML
--> --> -->
2.General frameworkIn the brane-world scenario, we take a four-dimensional spacetime (the brane) as the Universe, which was embedded in five-dimensional spacetime (the bulk). We consider the DGP model of the brane world scenario with the following action
where $ \tilde{K} = {[K] /\kappa_5^2} $, and $ [K] $ is the exterior curvature. The action is presented in terms of five-dimensional coordinates $ (x^0, x^1, x^2, x^3, y) $ on bulk, where the hypersurface $ y = 0 $ describes the brane. In the bulk action, $ {\cal{G}} $ is the determinant of the five-dimensional metric $ {\cal{G}}_{AB} $ with signature $ (- + + + +) $, $ {\cal{R}} $ is five-dimensional Ricci scalar constructed from $ {\cal{G}}_{AB} $, $ \Lambda $ is five-dimensional cosmological constant, and $ \kappa_5 $ is a redefinition of five dimensional Newtonian gravitational constant $ G_5 $ as $ \kappa_5^2 = 8\pi G_5 $, which is related to five dimensional Plank mass by $ \kappa_5^2 = M_5^{-3} $. In the brane action, $ g $ and $ R $ are determinants of four-dimensional induced metric and Ricci scalar related to induced metric $ g_{\mu\nu} = \delta^A_{\ \mu} \delta^B_{\ \nu} {\cal{G}}_{AB} $, respectively. The BD scalar field is denoted by $ \phi $, which lives on the brane without a potential term, and $ \omega $ is a dimensionless coupling constant, which determines the coupling between the gravity and $ \phi $. The Lagrangian term $ {\cal{L}}_m $ in the brane action includes the Lagrangian of the brane-matter, denoted by $ L_m $, and the brane tension, $ \lambda $. Thus, $ {\cal{L}}_m = L_m - \lambda $. The Einstein field equation is derived by defining the variation of action with respect to the metric as
Further, the energy-momentum tensor of the bulk cosmological constant is described by $ T^{(\Lambda)}_{AB} = -\Lambda {\cal{G}}_{AB} $, and $ T_{AB} $ is the total brane energy-momentum tensor with the following definition
where $ T^G_{\mu\nu} $ denotes the presence of a curvature scalar in brane action and behaves as a source of gravity. $ T^{(\phi)}_{\mu\nu} $ is related to the BD scalar field, and $ T^{(m)}_{\mu\nu} $ is related to the brane-matter energy-momentum tensor. The matter section of brane is assumed to be filled with the perfect fluid $ T^{(m)\mu}_{\ \ \ \nu} = \delta(y) {\rm{diag}}(-\rho_b, p_b, p_b, p_b, 0) $, where $ \rho_b = \rho + \lambda $ is the brane-matter energy density, and $ p_b = p-\lambda $ is the brane-matter pressure. Because brane matter has no direct coupling to the other component in the action, the continuity of brane matter is preserved, i.e.,
$ \dot\rho + 3H(\rho+p) = 0. $
(4)
In contrast, the equation of motion of BD scalar field $ \phi $ is obtained by taking the variation of action with respect to the scalar field as
where $ A = {\beta^2\omega / 6} -(1 +\beta) $; notably, in obtaining above equation, it is assumed that $ \phi = \phi_0 a^\beta $ [54,55]. The effective DGP length scale in this model is defined as $l_{\rm effDGP} = {|A|\phi / M_5^3}$, where $ \phi $ is a function of time, such that the effective DGP length scale is varying in time. A constant DGP length scale is introduced as $ l_c = {|A| \phi_0 / M_5^3} $. Then, the familiar form of the Friedmann equation is given by
where $ \chi = \big[1- (\Phi \rho_b) / 6 M_5^3 \big] $, $ \Phi = A \phi / M_5^3 = A \Phi_0 a^\beta $ (with $ \Phi_0 \equiv \phi_0 / M_5^3 $), and $ \epsilon = \pm 1 $. Further, the brane effective cosmological constant is described by $ \Lambda_4 = \big[\Lambda + $ $ ( \lambda^2 / 6 M_5^3) \big] / 6 M_5^3 $, which as the RS-model was assumed to be zero. The last term that describes the dark radiation has been ignored as well. According to [56,57], for convenience, the five-dimensional Planck mass is set to one, i.e., $ \kappa_5 = 1 $, for the remainder of the paper.
3.First order quark hadron phase transitionThe phase transition in the temperature interval $ 180\;{\rm{MeV}} < T < 250\;{\rm{MeV}} $ is characterized by sigular behavior of the partition function, which might be a first or second order phase transition [24]. The phase transition at higher or lower temperature occurs through trace anomaly or hadronic resonance gas, which will be investigated in the following section. In this section, we assumed that the quark-hadron phase transition is first order, which happens in the aforementioned temperature interval (refer to [58] and references therein for more information on the first order quark-hadron phase transition). According to [24], the matter equation of state in the quark-gluon phase is expressed as
where the subscript $ q $ denotes the quark-gluon matter, and the constant $ a_q $ is equal to $ a_q = 61.75(\pi^2/90) $. $ W(T) $, denoting the potential energy density, is given by [24],
$ W(T) = B+\gamma_T T^2 - \alpha_{T} T^{4}, $
(9)
where the constant $ B $ is the bag pressure constant, $ \alpha_T = 7\pi^2/20 $, $ \gamma_T = m^2_s/4 $, where the mass of the strange quark, $ m_s $, is in the range (60 – 200) MeV. This type of potential $ W $ can be found out in the model where the quark fields interact with a chiral formed from a scalar field and the $ \pi $ meson field [59]. The constant $ B^{1/4} $ in the above equation could be determined through the results obtained from low energy hadron spectroscopy, heavy ion collisions, and from phenomenological fits of light hadron properties stating that it must be between 100 and 200 MeV [58]. The cosmological fluid, which is commonly assumed to be an ideal gas, can be described by the Maxwell-Boltzmann distribution function with energy density $ \rho_h $ and pressure $ p_h $, obeying the following equation of state
$ p_h = {1 \over 3} \rho_h = a_\pi T^{4} , $
(10)
where the constant is read as $ a_\pi = 17.25 \pi^2 / 90 $. In contrast, it has been shown that the identity $ p_q(T_c) = p_h(T_c) $ defines a critical temperature $ T_c $ [60-64] in which for the present model, one has
where in obtaining the above result, it is assumed that $ m_s = B^{1/4} = 200\; {\rm{MeV}} $. Because this phase transition is of first order, discontinuities in the energy density, number density, and entropy are found when they cross the critical curve. This behavior of the quantities is perfectly described in Ref. [13]. The main quantities that deal with them in the present study are the energy density, pressure, scale factor, and the temperature, which are determined through the conservation equation, Friedmann equation, and equation of state. In the subsequent subsections, the behavior of these quantities will be studied in the framework of DGP brane-world, including a BD scalar field in the brane before, during, and after the phase transition. 23.1.Behavior of temperature in quark-gluon phase (QGP) for general W(T)
-->
3.1.Behavior of temperature in quark-gluon phase (QGP) for general W(T)
At the temperature higher than the critical temperature $ T > T_c $, i.e., before the phase transition, matter is in the quark phase, which is described by the equation of state Eq. (8). The Hubble parameter is determined by applying the equation of state Eq. (8) on the conservation equation (4), as
where the potential energy density (9) is utilized. By integrating the above equation, the scale factor of the universe in this phase can be extracted as
This equation describes the behavior of the temperature in terms of the cosmic time. The numerical result obtained for the temperature is depicted in Figs. 1 and 2, respectively for the normal branch ($ \epsilon = -1 $) and self-accelerating branch ($ \epsilon = +1 $). The temperature in the quark phase decreases with time, where the increasing of the BD coupling $ \omega $ results in the reduction of temperature. Further, for the self-accelerating branch of the model, the temperature reaches the critical temperature faster than the normal branch. Figure1. (color online) ${\bf{\underline{\epsilon = -1}}}$: $T$ versus $\tau$ in quark-gluon phase plotted for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\; {{\rm{MeV}}^{-1}}$, $\lambda = 10^{9} \;{{\rm{MeV}}^4}$, and $B^{1/4} = 200 \;{\rm{MeV}}$.
33.1.1.Evolution of temperature in QGP for $ W(T)=B $ -->
3.1.1.Evolution of temperature in QGP for $ W(T)=B $
Ignoring the temperature effect results in a constant potential $ W(T) = B $, which is another interesting model that deals with quark confinement and is worth considering. This is related to an elastic bag model, which allows the quarks to freely move around. Because of this constant potential, the equation of state obtains a simple form $ p_q = {(\rho_q -4B) / 3} $, leading to the following Hubble parameter and scale factor
The equation yields the behavior of the temperature in terms of the cosmic time. Solving the above differential equation numerically, the result is plotted in Figs. 3 and 4 for normal and self-accelerating branches ,respectively, for different choices of the BD coupling $ \omega $, where one could find that the enhancement of BD constant results in lower temperature. In general, the temperature decreases with time, and this happens faster for a self-accelerating branch than for the normal branch. Figure3. (color online) ${\bf{\underline{\epsilon = -1}}}$: Temperature $T$, as a function of time, $t$, in quark-gluon phase plotted for constant self-interacting potential $W(T) = B$, and for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are taken as: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\;{{\rm{MeV}}^{-1}}$, $\lambda = 10^{9}\;{{\rm{MeV}}^4}$, and $B^{1/4} = 200\;{\rm{MeV}}$.
Figure4. (color online) ${\bf{\underline{\epsilon = +1}}}$: Temperature $T$, as a function of time, $t$, in quark-gluon phase plotted for constant self-interacting potential $W(T) = B$, and for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are taken as: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\;{{\rm{MeV}}^{-1}}$, $\lambda = 10^{9}\;{{\rm{MeV}}^4}$, and $B^{1/4} = 200\;{\rm{MeV}}$.
23.2.Behavior of hadron volume fraction -->
3.2.Behavior of hadron volume fraction
During the phase transition, the matter density changes from the quark density $ \rho_Q $ to the hadron energy density $ \rho_H $, which are respectively $ \rho_Q = 5 \times 10^9 \;{\rm{MeV}}^4 $ and $ \rho_H \approx 1.38 \times 10^9 \;{\rm{MeV}}^4 $ (notably, $ \rho_Q $ stands for the energy density of the universe when it is in the pure quark phase, namely when all matter of the universe is quarks. Similarly, $ \rho_H $ stands for the energy density of the universe when it is in the pure hadron phase). In this phase transition, the temperature, pressure, entropy, and enthalpy remain constant at $ T_c = 125\;{\rm{MeV}} $ and constant pressure $ p_c \approx 4.6 \times 10^8\;{\rm{MeV}}^4 $. The universe transitions from a pure quark phase to a pure hadron phase. Mid-transition, the energy density of the universe is a composite of quarks and hadrons. Then, the energy density can be expressed in terms of a volume fraction term in the hadron phase, which is defined as [56,57,58,65,66]
$ \rho = \rho_H h(t) + [1-h(t)]\rho_{Q}. $
(17)
At the beginning of the transition ($ h(t) = 0 $), all matter is in the phase of the quark, and by passing time the matter phase changes to the hadron phase, where at the end of the transition ($ h(t) = 1 $) all matter is in the hadron phase. Imposing Eq. (17) on the conservation equation leads to the following Hubble parameter
where the parameter $ r $ is defined as $ r = (\rho_H - \rho_Q) / (\rho_Q+p_c) $. The scale factor is obtained by taking an integral from the above relation as
$ a(t) = a_0 \big[ 1+rh \big]^{-1/3}. $
(19)
Figure 5 illustrates the scale factor of the universe versus the volume fraction during the quark hadron phase transition, which expresses an expansion for the universe in the era where the temperature, pressure, entropy, and enthalpy are constant. Figure5. (color online) Scale factor as a function of hadron volume fraction during QHPT in DGP brane gravity with BD scalar field in brane.
By Utilizing the Hubble parameter (18) in the Friedmann equation (7), one could find the evolution equation of the volume fraction as
By finding the numerical solution for the above differential equation, the behavior of the volume fraction in terms of the cosmic time during the phase transition is presented in Figs. 6 and 7 for different choices of the BD coupling $ \omega $ for both branches. More BD coupling results in a faster phase transition. Further, for the self-accelerating branch, the transition occurs earlier, and the universe enters the pure hadron phase faster than the normal branch. Figure6. (color online) ${\bf{\underline{\epsilon = -1}}}$: Hadron volume fraction as a function of cosmic time $\tau$ has been depicted for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\;{{\rm{MeV}}^{-1}}$, $\lambda = 10^{9}\;{{\rm{MeV}}^4}$, and $B^{1/4} = 200\;{\rm{MeV}}$.
Figure7. (color online) ${\bf{\underline{\epsilon = +1}}}$: Hadron volume fraction as a function of cosmic time $\tau$ has been depicted for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\;{{\rm{MeV}}^{-1}}$, $\lambda = 10^{9}\;{{\rm{MeV}}^4}$, and $B^{1/4} = 200\;{\rm{MeV}}$.
23.3.Evolution of temperature in pure hadronic phase era -->
3.3.Evolution of temperature in pure hadronic phase era
After the phase transition, the universe is in the pure hadronic phase, where the following simple equation describes the equation of state of the matter
$ \rho_h = 3p_h = 3a_\pi T^{4}. $
(21)
Then, following the same processes, the Hubble parameter and the scale factor are easily derived as
$ H = -{\dot{T} \over T} ; \qquad a(T) = c {T_c \over T}. $
(22)
Inserting the above equation into the Firedmann equation results in a evolution equation for the temperature in the pure hadronic phase of the universe
Solving the above differential equation numerically, the behavior of the temperature in terms of the cosmic time can be depicted as Figs. 8 and 9, respectively, for the normal and self-accelerating branches for different values of the BD coupling constant $ \omega $. The temperature clearly decreases with time, and the hadron phase era of the universe occurs earlier in the self-accelerating branches. Further, for larger values of $ \omega $, there is lower temperature and the phase transition happens earlier. This result is in good consistency with the previous results regarding the other eras. Figure8. (color online) ${\bf{\underline{\epsilon = -1}}}$: Evolution of temperature $T$ versus $t$ in pure hadronic phase era depicted for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are taken as: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\;{{\rm{MeV}}^{-1}}$, and $\lambda = 7 \times 10^{10}\;{{\rm{MeV}}^4}$.
Figure9. (color online) ${\bf{\underline{\epsilon = +1}}}$: Evolution of temperature $T$ versus $t$ in pure hadronic phase era depicted for different values of BD coupling constant $\omega$ as: $\omega = 2.1 \times 10^{3}$ (solid line), $\omega = 2.3 \times 10^{3}$ (dashed line), $\omega = 2.5 \times 10^{3}$ (dotted line), $\omega = 2.7 \times 10^{3}$ (dotted-dashed line). Other constant parameters are: $\beta = 5.24 \times 10^{-2}$, $\Phi_0 = 2 \times 10^4\;{{\rm{MeV}}^{-1}}$, and $\lambda = 7 \times 10^{10}\;{{\rm{MeV}}^4}$.
-->
4.1.High temperature regime
In the temperature regime $ T > 250\;{\rm{MeV}} $, the gluon and quarks are effectively massless and behave like radiation. Applying the trace anomaly to obtain an equation of state determines that the data are fit on a simple form of equation of state as
where the constants $ \alpha $ and $ \beta $ are found using a least-squares fit as $ \alpha = 14.9702 \pm 009997 $ and $ \sigma = 4.99115 \pm 004474 $ [68,69]. Substituting Eq. (24) into the conservation equation leads to following result, which expresses the scale factor in terms of the temperature as
which describes the behavior of temperature as a function of time. The numerical results for the above differential equation were depicted in Fig. 10 for two branches. Figure10. (color online) Temperature $T$ versus cosmic time $\tau$ in high temperature region by smooth crossover procedure in DGP brane gravity with BD scalar field on brane for $ 250\;{\rm{MeV}} \leqslant T \leqslant 700\;{\rm{MeV}}$. Constant parameters are: $\beta = 2.47 \times 10^{-3}$, $\Phi_0 = 2 \times 10^{5}\;{{\rm{MeV}}^{-1}}$, $\omega = 10^4$, and $\lambda = 10^{9}\;{{\rm{MeV}}^4}$.
We plot the numerical results of Eq. (26) in Fig. 10 for two branches. The plots display the effective temperature in the QGP in the BD model of the DGP brane world for the temperature interval $ 250\;{\rm{MeV}} \leqslant T \leqslant 700\;{\rm{MeV}} $, acquired with the smooth crossover approach. With time, the universe becomes cooler, and the situation is almost the same for both cases. The higher and lower curves indicate the temperature behavior for the initial temperatures $ 700\;{\rm{MeV}} $ and $ 250\;{\rm{MeV}} $, respectively. The curve for any other initial value between these two temperatures is in the shaded region. 24.2.Low temperature regime -->
4.2.Low temperature regime
Although the trace anomaly is a suitable approach to acquire a realistic equation of state in the high temperature regime, the approach seems to fail in the low temperature regime mostly due to the discretization effect. In the low temperature regime, where $ T < 180\;{\rm{MeV}} $, one can achieve an equation of state by the HRG model [72]. In the HRG model, the confinement of QCD is treated as a non-interacting gas of fermions and bosons [73,74]. In this case, the era before the phase transition (namely quark-gluon phase) is considered at low temperature. Then, the Universe is in confinement phase and can be treated as a non-interacting gas of fermions and bosons. The concept of the HRG model is to implicitly account for the strong interaction in the confinement phase by looking at the hadronic resonances only, as these are basically the only relevant degrees of freedom in that phase. It has been shown that the HRG results can be parametrized for the trace anomaly as [72]:
where $ a_1 $ = 4.654 GeV?1, $ a_2 $ =?79 GeV-3, $ a_3 $ = 8081 GeV-4, $ a_4 $ =?7039000 GeV?10, and $ I(T) = \rho(T) - 3p(T) $ is the trace anomally. Through the calculation of the trace anomally $ I(T) $ in the lattice QCD, the energy density, pressure, and entropy could be estimated by using usual thermodynamics identities. The integral of the trace anomaly displays the pressure difference between the temperatures $ T $ and $ T_{\rm{low}} $
The second term on the left hand side of above equation, $ p \left( T_{\rm{low}}\right) $, can be ignored for sufficiently small values of the lower integration limit because of exponential suppression [75]. The energy density, which is expressed as $ \rho(T) = I(T) + 3p(T) $, can be calculated. At the end, using Eqs. (27) and (28), we have the following respective relations for the energy density and pressure:
where $ \eta = -0.112 $. Inserting Eqs. (29) and (30) in the conservation equation, the Hubble parameter can be derived in terms of temperature of its time derivative as
Differential Eq. (33) describes the behavior of temperature as a function of cosmic time in the QGP for the DGP brane-world scenario with a BD scalar field on the brane for the temperature interval $ 80\;{\rm{MeV}} \leqslant T \leqslant 180\;{\rm{MeV}} $. The relation displays the era before the phase transition at low temperature, where the Universe is treated as a non-interacting gas of fermions and bosons, as it is in confinement phase. The equation can be solved numerically, where the obtained results were plotted in Fig. 11 for two branches of the model. The figure illustrates the behavior of temperature in terms of cosmic time. The higher and lower curves display the temperature behavior for the initial values of $ 180\;{\rm{MeV}} $ and $ 80\;{\rm{MeV}} $, respectively. Further, the corresponding curve for any other initial value in this temperature interval is in the shaded region. The phase transition for the normal branch evidently occurs after the self-accelerating branch. Figure11. (color online) $T$ versus $\tau$ in low temperature region by smooth crossover procedure in DGP brane gravity with BD scalar field on brane for $80\;{\rm{MeV}} \leq T \leq 180\;{\rm{MeV}}$ and following constants: $\beta = 2.47 \times 10^{-3}$, $\Phi_0 = 2 \times 10^{5}\;{{\rm{MeV}}^{-1}}$, $\omega = 10^4$, and $\lambda = 10^{9}\;{{\rm{MeV}}^4}$.