陈浩 机械工程副教授
机械、材料与制造工程系 / 理工学院



联系方式 办公室
理工楼102

校园
宁波诺丁汉大学

地址
浙江省宁波市泰康东路199号

电话
+86 (0) 574 8818 0000-8946

邮箱
Hao.Chen@nottingham.edu.cn



学历
北京航空航天大学 材料加工 学士
诺丁汉大学 机械工程 硕士
诺丁汉大学 机械工程 博士

个人简介
2005.09～2009.07：北京航空航天大学材料成型及控制工程专业本科学习，获工学学士学位；2009.09～2010.12：英国诺丁汉大学机械、材料及制造工程系机械工程专业硕士研究生学习，获工学硕士学位；2010.06～2010.12：英国Romax Technology任初级工程师，应用工程师；2011.01～2015.07：英国诺丁汉大学机械、材料及制造工程系机械工程专业博士研究生学习，获工学博士学位；20014.02～2016.02：宁波诺丁汉大学机械、材料及制造工程系访问助理教授，硕士生导师；2016.02～至今：宁波诺丁汉大学机械、材料及制造工程系讲师，博士生导师。主要从事金属材料和粉末的加工、喷涂与测试及金属表面腐蚀、防护与涂层的科研与技术开发工作。近年来，参与国家自然科学基金1项，浙江省公益项目1项，宁波市自然科学基金2项。在高温合金及其涂层的微观结构、腐蚀防护和测试应用等领域的研究成果已多次在著名国际学术期刊Materials Science and Engineering: A，Surface and Coatings Technology，Journal of Alloys and Compounds上发表。


教学
Undergraduate, University of Nottingham Ningbo ChinaMaterials and Manufacturing (MM1MMG), Module Convenor
Materials in Design (MM2MID), Module Convenor
Joining Technology (MM4JTN), Module Convenor
Electromechanical Systems (MM1EM1), Module Convenor
Engineering Design Project (MM1EDP)
Dynamics of Mechanical Systems (MM1DMS)
Professional Studies (MM1PRO)
Design and Manufacture 2 (MM2DM2)
Design for Manufacture (MM2DFM)
Undergraduate, University of Nottingham, UKTeaching Assistant – 2011-2012
Material testing demonstrator – 2012-2013


研究方向
Current research interests fall into the following areas:Advanced functional thin film developments for marine applications.
Mechanical properties and microstructure characterisation of thermally sprayed coatings, such as thermal barriers coatings (TBCs) for gas turbine engine applications.
High temperature creep behaviour and failure mechanism investigation of thermal barrier coatings by means of small punch creep test.
Electron backscatter diffraction (EBSD) measurements of induced strain during small specimen creep tests.
Element diffusion and phase evolution modelling of multi-phase alloys during welding and heat treatment.


发表文章
H. Chen, Application of Precipitate Free Zone Growth Kinetics to the β-Phase Depletion Behavior in a CoNiCrAlY Coating Alloy: An Analytical Approach, Metallurgical and Materials Transactions A, 49 (2018) 2551-2560.
H. Chen, Microstructure characterisation of un-melted particles in a plasma sprayed CoNiCrAlY coating, Materials Characterization, 136 (2018) 444-451.
H. Chen, T. Barman, Thermo-Calc and DICTRA modelling of the β-phase depletion behaviour in CoNiCrAlY coating alloys at different Al contents, Computational Materials Science, 147 (2018) 103-144.
H. Chen, T.H. Hyde, K.T. Voisey, D.G. McCartney, Effects of pre-cracking on small punch creep testing of a vacuum plasma sprayed CoNiCrAlY coating, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232 (2018) 242-249.
H. Chen, G.A. Jackson, W. Sun, An overview of using small punch testing for mechanical characterisation of MCrAlY bond coats, Journal of Thermal Spray Technology, 26 (2017) 1222-1238.
H. Chen, Y.Q. Si and D.G. McCartney, An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy, Journal of Alloys and Compounds, 704 (2017) 359-365.
H. Chen and D.G. McCartney, Some aspects on the β-phase depletion behaviour of different oxide growth kinetics in HVOF CoNiCrAlY coatings during oxidation, Surface and Coatings Technology, 313 (2017) 107-114.
H. Chen, T.H. Hyde, Use of multi-step loading small punch test to investigate the ductile-to-brittle transition behaviour of a thermally sprayed CoNiCrAlY coating, Materials Science and Engineering: A, 680 (2017) 203-209.
H. Chen, Z. Pala, T. Hussain, D.G. McCartney, Fabrication and microstrain evolution of Al-TiB₂ composite coating by cold spray deposition, Journal of Materials: Design and Applications, In Press, 2017, http://doi.org/10.1177/**90559.
G.A. Jackson, H. Chen, W. Sun, D.G. McCartney, The high temperature creep properties of a thermally sprayed CoNiCrAlY coating via small punch creep testing, Key Engineering Materials, 734 (2017) 37-48.
H. Chen, J. Yang, X. Xiao, Evaluation of the ductile-to-brittle transition temperature in a thermally sprayed CoNiCrAlY coating by small punch multi-step loading tests, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (2017) 6-13.
X. Xiao, H. Chen, K, Qian, Thermomechanical study of polyethylene porous membrane by coating silicon dioxide nanoparticles, Science and Engineering of Composite Materials, 24 (2017) 661-667.
J. Xu, T. Wu, J. Zhang, H. Chen, W. Sun, C. Peng, Microstructure measurement and microgeometric packing characterization of rigid polyurethane foam defects, Cellular Polymers, 36 (2017) 183-204.
H. Chen, G.A. Jackson, K.T. Voisey, D.G. McCartney, Modelling and experimental study on β-phase depletion behaviour of HVOF sprayed free-standing CoNiCrAlY coatings during oxidation, Surface and Coatings Technology, 291 (2016) 34-42.
H. Chen, K.T. Voisey, D.G. McCartney, Effect of surface conditions on internal oxidation and nitridation of HVOF MCrAlY coatings, Materials at High Temperature, 32 (2015) 215-220.
H. Chen, T.H. Hyde, K.T. Voisey, D.G. McCartney, Application of small punch creep testing to a thermally sprayed CoNiCrAlY bond coat, Materials Science and Engineering: A, 585(2013) 205-213.


科研项目 / 研究基金
Research grantHigh temperature creep behaviour of thermal barrier coatings, funded by Zhejiang Provincial Nature Science Foundation (LQ18E010002), participated as principle-investigator.
Improve toughness of NdFeB permanent magnets, funded by Hesheng Permanent Magnet Company, participated as principle-investigator.
Electrochemical Production of Titanium Alloy Powders for 3D Printing, funded by Science Technology Department of Zhejiang Province (2016C31023), participated as co-investigator.
Electrolytic Production of Ti-6Al-4V Powder for 3D Printing, funded by Ningbo Natural Science Foundation (2016A610114), participated as co-investigator.
Investigations of power flow characteristics of nonlinear vibration isolation systems, funded by Ningbo Natural Science Foundation (2015A610094), participated as co-investigator.