删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

TU1无氧铜轴心受压圆管柱整体稳定性能试验研究

本站小编 Free考研考试/2022-01-16

瑕佹壘鑰冪爺鑰冨崥涓撲笟璇剧湡棰樸€侀搴撱€佽棰戯紵杩欓噷璧勬簮瓒呭叏锛佸湪绾垮厤璐归槄璇伙紒
2涓囩鑰冪爺鑰冨崥鐢靛瓙涔︼紙棰樺簱銆佽棰戙€佸叏濂楄祫鏂欙級鍙婂巻骞寸湡棰橈紝娑电洊547鎵€闄㈡牎4涓囦綑涓€冪爺鑰冨崥涓撲笟绉戠洰銆佽€冪爺鍏叡璇撅紙鏀挎不鑻辫鏁板锛夈€�40绉嶄笓涓氱澹紙閲戣瀺纭曞+銆丮BA銆佸浗闄呭晢鍔$澹€佹柊闂讳紶鎾澹€佺ぞ浼氬伐浣滅澹瓑锛夈€�28绫诲悓绛夊鍔涚敵纭曚笓涓氥€�1130绉嶇粡鍏告暀鏉愩€傛棤璁烘偍鏄湡棰樻紨缁冦€侀搴撳埛棰橈紝杩樻槸澶嶄範鏁欐潗锛屼竴涓猇IP浼氬憳鍧囧彲婊¤冻鎮ㄧ殑闇€姹傘€�
张天雄1, 王元清2, 王综轶3, 衡月昆4
AuthorsHTML:张天雄1, 王元清2, 王综轶3, 衡月昆4
AuthorsListE:Zhang Tianxiong1, Wang Yuanqing2, Wang Zongyi3, Heng Yuekun4
AuthorsHTMLE:Zhang Tianxiong1, Wang Yuanqing2, Wang Zongyi3, Heng Yuekun4
Unit:1. 天津大学建筑工程学院,天津 300072;2. 清华大学土木工程安全与耐久教育部重点实验室,北京 100084;3. 武汉大学土木建筑工程学院,武汉 430072;4. 中国科学院高能物理研究所,北京 100049
Unit_EngLish:1.School of Civil Engineering, Tianjin University, Tianjin 300072, China
2.Key Laboratory of Civil Engineering Safety and Durability of Ministry of Education, Tsinghua University, Beijing 100084, China
3.School of Civil and Architectural Engineering
Abstract_Chinese:近年来, 铜材料因其自身优良的性能而被广泛应用于许多领域之中.为研究TU1无氧铜轴心受压构件的整体稳定性能, 对7个TU1无氧铜圆管柱试件进行了静力试验研究.试验测量了试件的几何初弯曲与荷载初偏心.基于试验结果, 分析了该类型构件的失稳模态, 得到了其整体稳定承载力, 建立了有限元分析模型并对试验结果进行了模拟计算.研究结果表明:试件的破坏模态均为整体失稳; 试件的稳定承载力大致遵循随柱子长细比增大而减小的规律; 试件的长细比越大, 其卸载后不可恢复的塑性变形越小; 长细比为55.9~85.6的试件易发生弹性失稳, 长细比为22.2~44.8的试件易发生弹塑性失稳; 有限元分析模型能够准确地考虑几何初始缺陷的影响, 计算结果与试验结果吻合良好.
Abstract_English:Copper material has been widely used in many fields for its good performance in recent years. In order to investigate the overall buckling behavior of TU1 oxygen free copper tubular columns under axial compression,seven full-scale specimens were used for static tests. After measuring the initial bending and loading eccentricity,the study analyzed the buckling failure mode,obtained the overall stability capacity,and constructed a finite element model to simulate the buckling behavior of the seven specimens based on experimental results. The results showed that the overall buckling mode explained the failure modes of all the specimens. In general,the overall buckling strength of the specimens decreased as the slenderness of the columns increased. Besides,the slender the specimen was,the smaller the unrecoverable plastic deformation would be after unloading. In addition,the specimens with the slenderness ratio of 55.9—85.6 were prone to show elastic buckling whereas the specimens with the slenderness ratio of 22.2—44.8 were elasto-plastic buckling. Finally,the finite element model predicted the effects of initial geometric imperfections with precision and the FEA results matched well with the actual experimental results.
Keyword_Chinese:无氧铜; 轴压柱; 整体稳定; 承载性能; 静力试验; 有限元分析
Keywords_English:oxygen free copper; axial compression column; overall buckling; bearing capacity; static test; finite element analysis

PDF全文下载地址:http://xbzrb.tju.edu.cn/#/digest?ArticleID=5895
相关话题/圆管 轴心

寮€閫歏IP锛氫竾绉嶈€冪爺鑰冭瘉瑙嗛闅忎究鐪嬶紝姣忔湰涓嶅埌涓€鍒嗛挶
547鎵€闄㈡牎鑰冪爺鑰冨崥1130绉嶆寚瀹氭暀鏉愮殑鍗冧綑绉嶉厤濂楅搴撱€佽棰戯紝娑电洊鑻辫銆佺粡娴庛€佽瘉鍒搞€侀噾铻嶃€佺悊宸ャ€佺鐞嗐€佺ぞ浼氥€佽储浼氥€佹暀鑲插績鐞嗐€佷腑鏂囥€佽壓鏈€佹柊闂讳紶鎾€佹硶瀛︺€佸尰瀛︺€佽绠楁満銆佸巻鍙层€佸湴鐞嗐€佹斂娌汇€佸摬瀛︺€佷綋鑲茬被绛�28绫诲绉戯紝VIP浼氬憳浣庤嚦128.00鍏冿紒