动力机械及工程
未公开
教授
冷却废气对小型强化直喷汽油机抗爆性及排放特性影响规律的研究

---

摩托车发动机气道试验台

---

自动多缸柴油发动机气道试验台

---

发动机测试中心气道试验台

---

高压差与高流量进排气系统测试平台

---

柴油机进气道流量系数优化技术开发

---

内燃机缸内不同空间尺度湍流特性及其对燃烧过程影响的研究

---

电控喷射单一燃料LNG汽车产品开发

---

缸盖气道带管的台架吹风测试技术

---

气道试验台

---

发动机气道及进气管流量测试系统

---

直喷汽油机闪急沸腾喷雾雾化机理研究

---

冷却废气对小型强化直喷汽油机抗爆性及排放特性影响规律的研究

---

柴油机汽油机两用气缸盖气道试验台

---

LFV发动机缸盖气道试验评估研究

---

发动机气缸盖气道稳态流动特性研究(东风小康）

---

汽油机柴油机气道试验台

---

27\38机型缸盖气道稳流特性试验研究

---

电控喷射单一燃料LNG汽车产品开发
可变焦距的发动机激光点火装置

---

可以同时测量汽油机气道涡流及滚流的快速测试系统

---

发动机余热分类回收系统

---

缸盖毛坯加工尺寸识别方法及装置
本发明公开了一种可变焦距的发动机激光点火装置,具体结构为:光纤通过激光点火器壳体固定在缸盖上,激光点火器壳体内设有初级透镜固定座和次级透镜固定座,初级透镜与次级透镜分别镶卧于透镜固定座内。次级透镜固定座下端设有保护镜,激光束经过光纤、初级透镜、次级透镜和保护镜射入缸内,汇聚于聚焦点。在初级透镜固定座的上方或下方设有三种方式的驱动机构可使初级透镜产生位移。

---

本发明公开了一种可同时测量汽油机气道涡流及滚流的快速测试装置，该装置由辊道升降组件、气流导向组件以及叶片式风速仪组件三大部分组成。工作台面下方的两块连接板用于固定两个同步电机，两个蜗杆轴支架用于支撑蜗杆轴，电机驱动蜗杆轴以及蜗轮蜗杆旋转，实现减速运动。辊道用于放置待测缸盖，两蜗轮分别焊接于对应的凸轮轴上，通过凸轮旋转顶起辊道，使得缸盖可在工作台上下移动。

---

本发明公开了一种发动机余热分类回收系统，其系统组成为：高温换热器与低温换热器气侧的进、出口并联，发动机排气总管分为两根歧管，两根歧管分别串接第一节气门和第二节气门。

---

缸盖毛坯加工尺寸识别方法及装置，具有CCD摄像机(1)、托板(2)、支撑架(3)、标靶(4)以及计算机，其特征是由2个或2个以上CCD摄像机构成识别接收器，识别接收器接收标靶图像，CCD摄像机镜头视野包含整个标靶平面，标靶是平面阵列的圆孔图案，或者是黑白平面的方块阵列。
变滚流GDI发动机气流循环变动的大涡模拟

---

Non-Newtonian flow effects on the coalescence and mixing of initially stationary droplets of shear-thinning fluids

---

Evaluation of force implementation in pseudopotentialbased multiphase lattice Boltzmann models

---

An experiment study on phenomenon and mechanism of flash boiling spray from a multi-hole gasoline direct injector

---

Large-eddy simulation of in-cylinder flow in a DISI engine with charge motion control valve

---

Cycle-to-cycle variation analysis of in-cylinder flow in a gasoline engine with variable valve lift

---

Insights into the development of the tumble motion using the direct and indirect steady-flow test methods

---

，Combustion and particle number emissions of a direct injection spark ignition engine operating on ethanol/gasoline

---

Predicting the vapor pressure of fatty acid esters in biodiesel by group contribution method

---

Updated prediction of the physical properties needed for modeling thespray behavior of biodiesel fuel

---

Analysis of recoverable exhaust energy from a light-duty gasoline engine

---

不同沸点燃料及其混合物的闪沸喷雾特性试验

---

Experimental and modeling study of the effect of manufacturing deviations on the flow characteristics of tangential

---

Numerical investigation of head-on droplet collision with lattice Boltzmann method

---

Low temperature NH3-SCR reaction over MnOx supported on protonated titanate

---

Neural network prediction of biodiesel kinematic viscosity at 313 K

---

Preparation of Pt/beta zeolite-Al2O3/cordierite monolith for automobile exhaust purification

---

Ag/Mg-Al-O composite for low temperature NOx storage

---

Predicting biodiesel densities over a wide temperature range up to 523 K

---

Numerical investigation on the head-on collision between unequal-sized droplets with multiple-relaxation-time lattice Boltzma

---

Parametric design of the tangential intake port in diesel engines

---

Full-parameter approach for the intake portdesign of a four-valve direct-injection gasoline engine

---

The interactions of in-cylinder flow andfuel spray in a gasoline

---

Combination catalyst for the purification of automobile exhaust from lean-burn engine

---

汽油直喷闪急沸腾喷雾特性的试验

---

Effects of tumble combined with EGR (exhaust gas recirculation) on the combustion and emissions in a spark ignition engine at

---

Numerical simulation of cavitation in the conical-spray nozzle for diesel premixed charge compression ignition engines

---

废气稀释和滚流比对汽油机部分负荷燃烧特性影响的研究

---

4气门汽油机气道滚流比测试方法的试验研究

---

Comment on "Comparison of methods for estimating critical properties of alkyl esters and its mixtures

---

In-cylinder air motion characteristics with variable valve lift in a spark ignition engine

---

A review of researches on thermal exhaust heat recovery with Rankine cycle

---

Comparisons of system benefits and thermo-economics for exhaust energy recovery applied on a heavy-duty diesel engine