yangzw@tju.edu.cn
材料加工工程
天津市青年优秀科技人才，天津大学北洋****，天津市“131”创新型人才
副教授
基于点火嘴气密性的陶瓷与金属封接技术研究与应用

---

基于氧空位迁移调控的ZrO2陶瓷与金属钎焊接头组织性能优化研究

---

异种材料连接界面设计与调控

---

CTOD检测试验

---

海洋装备关键结构部件电弧增材制造专用丝材开发

---

舰载机随舰特殊保障设备小型化3D打印技术研究

---

惯敏工艺鉴定试验工作合同

---

超声冲击同步辅助钛合金增材制造组织性能调控研究

---

陶瓷基复合材料与金属连接

---

大尺寸陶瓷-金属焊接技术

---

基于竞争反应调控的SiO2-BN复合陶瓷与金属钎焊机理研究

---

星载计算机核心元器件装联工艺评估和可靠性分析

---

陶瓷封接新技术的研究与应用

---

C/SiC复合材料与TiAl合金原位反应钎焊工艺研究

---

TiAl合金钎焊工艺及界面结构形成机理研究

---

技术服务年度协议-1

---

CTOD断裂韧度试验

---

2014年度CTOD工艺评定试验工作合同1

---

技术服务年度协议
一种电弧增材制造用可调节式拖尾气体保护罩

---

基于碳碳复合材料表面改性的提高钎料润湿性能的方法

---

全角度柔性针式超声喷丸装置

---

超声冲击表面改性辅助钛合金扩散连接方法

---

一种利用界面反应制备氧化锆陶瓷的方法

---

一种液态薄膜冶金连接高温合金的方法

---

一种交替熔丝送粉的电弧增材制造原位合金化装置及方法

---

一种电弧增材制造用可调节式拖尾气体保护罩及其使用方法

---

一种电弧增材制造用可调节式拖尾气体保护罩

---

一种提高碳纤维增强复合材料与金属钎焊接头强度的方法
一种电弧增材制造用可调节式拖尾气体保护罩

---

基于碳碳复合材料表面改性的提高钎料润湿性能的方法

---

全角度柔性针式超声喷丸装置

---

超声冲击表面改性辅助钛合金扩散连接方法

---

一种利用界面反应制备氧化锆陶瓷的方法

---

一种液态薄膜冶金连接高温合金的方法

---

一种交替熔丝送粉的电弧增材制造原位合金化装置及方法

---

一种电弧增材制造用可调节式拖尾气体保护罩及其使用方法

---

一种电弧增材制造用可调节式拖尾气体保护罩

---

一种提高碳纤维增强复合材料与金属钎焊接头强度的方法
Interfacial microstructure evolution and mechanical properties of Ni3Al-based alloy TLP joints with BNi-2 interlayer

---

Diffusion bonding of Ni3Al-based alloy using a Ni interlayer

---

C/C composite surface modified by electrophoretic depositing SiC nanowires and its brazing to Nb

---

Relief of residual stress in Al2O3/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer

---

Microstructure and Mechanical Properties of Titanium–Zirconium–Molybdenum and Ti2AlNb Joint Diffusion Bonded with and without

---

Effect of ultrasonic impact treatment on the microstructure and mechanical properties of diffusion-bonded TC11 alloy joints

---

Microstructure and mechanical properties of Ni3Al-based alloy joint transient liquid phase bonded using Ni/Ti interlayer

---

Design of reinforced interfacial structure in brazed joints of C/C composites and Nb by pre-oxidation surface treatment combi

---

An investigation on diffusion bonding of TZM alloy and Nb-Zr alloy using Ni foil as an interlayer

---

Contact-reactive brazing of Ti3SiC2 ceramic to TC4 alloy using a Ni interlayer: Interfacial microstructure and joining proper

---

Vacuum brazing of Ti2AlNb and TC4 alloys using Ti-Zr-Cu-Ni and Ti-Zr-Cu-Ni plus Mo filler metals: Microstructural evolution a

---

Effects of Nb content in Ti-Ni-Nb brazing alloys on the microstructure and mechanical properties of Ti-22Al-25Nb alloy brazed

---

Zirconia ceramic and Nb joints brazed with Mo-particle-reinforced Ag-Cu-Ti composite fillers: Interfacial microstructure and

---

Microstructure and mechanical properties of Al2O3/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fille

---

Active metal brazing of SiO2-BN ceramic and Ti plate with Ag-Cu-Ti plus BN composite filler

---

Microstructure and mechanical properties of Al2O3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag-Cu and Ag-Cu plus B

---

Low-temperature diffusion brazing of actively metallized Al2O3 ceramic tube and 5A05 aluminum alloy

---

Design of reinforced interfacial structure in brazed joints of C/C composites and Nb by pre-oxidation surface treatment combi

---

Effect of post weld heat treatment on the microstructure and corrosion behavior of AA2219 aluminum alloy joints welded by var

---

An investigation on diffusion bonding of TZM alloy and Nb-Zr alloy using Ni foil as an interlayer

---

Active metal brazing of SiO2-BN ceramic and Ti plate with Ag-Cu-Ti plus BN composite filler

---

Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti/Ni interlayer: Microstructure characterization and mechanical

---

Characterization of microstructure and mechanical properties of Al2O3/TiAl joints vacuum-brazed with Ag-Cu-Ti plus W composit

---

Microstructure and mechanical properties of Al2O3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag-Cu and Ag-Cu + B

---

Zirconia ceramic and Nb joints brazed with Mo-particle-reinforced Ag-Cu- Ti composite fillers: Interfacial microstructure and

---

Microstructure and mechanical properties of TiAl alloy joints vacuum brazed with Ti-Zr-Ni-Cu brazing powder without and with

---

Microstructure and mechanical properties of Al2O3/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fille

---

Microstructure and mechanical properties of Al2O3 ceramic and TiAl alloy joints brazed with Ag–Cu–Ti filler metal

---

Interfacial microstructure and mechanical properties of zirconia ceramic and niobium joints vacuum brazed with two Ag-based

---

Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2-Ni-B brazing powder

---

Microstructure and mechanical properties of active brazed SiO2-BN ceramic modified by electron-beam evaporated Ti

---

Interlayer design to control interfacial microstructure and improve mechanical properties of active brazed Invar/SiO2-BN join

---

Interfacial structure and fracture behavior of TiB whisker-reinforced C/SiC composite and TiAl joints brazed with Ti-Ni-B bra

---

Interfacial microstructure and strengthening mechanism of BN-doped metal brazed Ti/SiO2-BN joints

---

Correlation between microstructure and mechanical properties of active brazed Invar/SiO2-BN joints

---

Interfacial microstructure and mechanical property of SiO2-BN ceramics and Invar joint brazed with Ag-Cu-Ti active filler met