licmtju@163.com
材料学
国家****科学基金获得者、中青年科技创新领军人才
教授
650℃铁素体锅炉用钢材料及其焊接性能研究

---

航空航天冲压发动机复杂零部件扩散连接技术与设备研制

---

自适应无铅焊料制备及连接可靠性的研究

---

超级钢块体纳米化制备技术的应用基础研究

---

材料复合与功能化(芯棒表面复合强化技术)

---

高性能轧辊芯棒

---

低成本高性能无铅焊料产品开发

---

铁素体耐热钢强韧化机理及工艺优化

---

低活化铁素体钢高温构件均质连接及可靠性评价

---

700oC服役ODS钢包层构件制造及连接可靠性

---

高性能二硼化镁超导体结构调控及快速制备技术

---

高性能深海管线管相变行为与生产工艺优化

---

高性能金属材料相变行为、强化机理与组织控制

---

高热强性低活化铁素体/马氏体钢组织设计及其搅拌摩擦焊接

---

新一代钢铁材料组织细化机理与块体纳米化制备
Fe-Ni合金瞬态微小压应力变形晶粒细化方法

---

高铬铁素体耐热钢奥氏体化微变形板条马氏体组织控制方法

---

原位制备碳包覆镍颗粒掺杂MgB2超导材料的方法

---

超导MgB2纳米颗粒的低温快速粉末烧结方法

---

二硼化镁颗粒增强型锡银锌复合焊料及其制备方法

---

通过球磨粉末氧化控制并烧结高载流MgB2超导体的方法

---

锡银锌系无铅焊膏及其制备方法

---

金属Sn掺杂MgB2超导体及高温快速制备方法

---

纳米MgO晶须的低温制备方法
2010年11月已转让至天津和顺达精密带钢有限公司

---

---

---

---

---

---

---

---

The accelerated low-temperature sintering of MgB2 bulks with high critical density by minor Sn-doping

---

Considerations for growth mode in isochronal austenite-ferrite transformation of ultra-low-carbon Fe-C alloy

---

MgB2 superconductors with abnormally-improved Jc sintered after autoxidation of milled original powders

---

Influence of ball-milled amorphous B powders on the sintering process and superconductive properties of MgB2

---

The enhancement of Jc in the nano SiC-doped MgB2 superconductors rapidly synthesized by activated sintering at low-temperature activated sintering

---

Mechanism analysis for the enhanced electromagnetic properties in nano-SiC-doped MgB2 based on the discussion of sintering process

---

Evolution of cellular spacing during directional solid-state alpha-gamma transformation of Fe-Mn-Al alloy

---

The effect of Cu addition on the sintering process and superconductive properties of um-SiC-doped MgB2 bulks

---

Variation of martensite phase transformation mechanism in minor-stressed T91 ferritic steel

---

Approaches for isochronal transformation kinetics model and their application to the crystallization of amorphous alloys

---

Effect of heating rates on microstructure and superconducting properties of pure MgB2

---

Effect of composition and cooling rate on the microstructure of Sn-3.7Ag-0.9Zn-Bi solders

---

Formation of Interfacial structure of Sn-3.7Ag-0.9Zn eutectic solder with different Al additions

---

Characterization and the mechanism of formation of the ternary compound MgNi2.5B2 in Ni-doped MgB2 bulk

---

Strengthening mechanism of SiC-particulate reinforced Sn–3.7Ag-0.9Zn lead-free solder

---

Austenite-ferrite transformation kinetics under uniaxial compressive stress in Fe-2.96at.%Ni alloy

---

Characteristic and synthesis mechanism of MgB2 nanoparticles in solid-state reactive sintering

---

Study on crystallization of nanocrystalline /amorphous Al-based alloy

---

Micro organic single crystalline phototransistors of 7,7,8,8-tetracyanoquinodimethane (TCNQ) and tetrathia- fulvalene (TTF)

---

The role of cooling rate in the microstructure of Al-Fe-Si alloy with high Fe and Si contents

---

Effect of cooling rate on microstructural formation and hardness of 30CrNi3Mo steel

---

Formation mechanism of granular bainite in an 30CrNi3MoV steel

---

Incompleted bainitic transformation characteristics in an isochronally annealed 30CrNi3MoV steel

---

Effect of Cu addition in reduction of MgO content for the synthesis of MgB2 through sintering

---

The mechanism of accelerated phase formation of MgB2 by Cu-doping during low-temperature sintering

---

Effects of thermal treatment on microstructure and microhardness of rapidly-solidified Sn-Ag-Zn eutectic solder

---

Evolution of intermetallic compounds layers in the soldered Sn-3.7Ag-1.0In-0.9Zn/Cu interface

---

Effects of aging on structural evolution of the rapidly-solidified Sn-Ag-Zn eutectic solder

---

Effects of small addition of In on the structure of the rapidly-cooled Sn-Ag-Zn solder

---

Effects of thermal aging on microstructure and microhardness of Sn-3.7Ag-0.9Zn-1In solder

---

Effect of high-temperature annealing on the microstructural formation of Sn-3.7Ag-0.9Zn-xAl lead-free solder

---

The formation and evolution of intermetallic compounds formed between Sn-Ag-Zn-In lead-free solder and Ni/Cu substrate

---

Formation of MgO whiskers on the surface of bulk MgB2 superconductors during in situ sintering

---

Phase formation process of bulk MgB2 analyzed by Differential Thermal Analysis during sintering

---

Effects of austenite stabilization on the onset of martensite transformation in T91 steel

---

The synthesis of lamellar nano MgB2 grains with nanoimpurities flux pinning centers and their significantly improved critical current density

---

Significant enhancement of critical current density in Gly-doped MgB2 bulk by tailoring the formation of MgO

---

Effects of ball milling on the sintering process and superconducting properties of (MgB2)0.96Ni0.04 bulks

---

Low temperature synthesis of MgB2 supercondutors

---

Kinetics of the austenite-ferrite transformation with and without applied stress

---

Effects of two-step tempering treatment on the microstructural formation of T91 ferritic steels

---

Effect of austenization temperature on the martensitic transformation in an low-alloy ultra-high-strength steel

---

Effect of minor compressive deformation in austenite on martensitic transformation in modified 9-12%Cr ferritic steel

---

The isochronal delta -> gamma transformation of high Cr ferritic heat-resistant steel during cooling

---

Isothermal austenite-ferrite transformation and kinetic analysis of Fe-0.04at.%C alloy

---

Abnormal austenite-ferrite transformation kinetics of ultra-low-nitrogen Fe-N alloy

---

Kinetic consideration for the incubation of the phase transformation and its application to the crystallization of amorphous alloy

---

Critical temperature for massive transformation in ultra-low-carbon Fe-C alloys

---

A multi-peak transformation kinetics model and its application to the isothermal crystallization of Mg65Cu25Y10 amorphous alloy

---

Influence of minor Co on the formation of intermetallic phases in the Al91Fe7Si2 alloy

---

Improved analytical model for isochronal transformation kinetics

---

Observation of flux jump in (MgB2)0.96Ni0.04 superconductor doped with milled Ni powders

---

Investigation on the precipitation behavior of M3C phase in T91 ferritic steels

---

Interstitial-interstitial interaction of oxygen atoms in a Nb-based ternary body-centered-cubic system

---

The microstructure and properties of the Sn-xBi-0.9Zn-0.3Ag lead-free solders

---

A novel approach for efficient Ni nanoparticle doping of MgB2 by liquid-assisted sintering

---

Synthesis and characteristics of Y-Zeolite/MCM-48 biporous molecular

---

The accelerated formation of MgB2 phase with high critical current density by Cu and SiC multi-doping during the low-temperature sintering process

---

Variation of the enhancement mechanism in the critical current density of Cu-doped MgB2 samples sintered at different temperatures

---

In-situ formation process and mechanism of bulk MgB2 before Mg melting

---

The accelerated formation of MgB2 bulks with high critical current density by low-temperature Cu-doping sintering

---

Development of a lead-free solder: Sn-4.0Bi-3.7Ag-0.9Zn

---

Effect of Sn-doping on the sintering process of MgB2 and its superconductive properties

---

Effect of the addition of In on the microstructural formation of Sn-Ag-Zn lead-free solder

---

Microstructures of eutectic Sn-Ag-Zn solder solidified with different cooling rates

---

Effect of the soldering time on the formation of interfacial structure between Sn-Ag-Zn lead-free solder and Cu substrate

---

Effect of Bi content on spalling behavior of Sn-Bi-Zn-Ag/Cu interface

---

The varied kinetics mechanisms in the synthesis of MgB2 from elemental powders by low-temperature sintering

---

Organic single crystalline micro- and nanowires field-effect transistors of a tetrathiafulvalene (TTF) derivative with strong π-π orbits and SS interactions

---

The kinetics of the austenite-ferrite phase transformation of Fe-4Cr alloy during continuous cooling

---

Recent developments for isochronal transformation kinetics model and their applications

---

Effects of Zn additions on the structure of the soldered Sn-3.5Ag and Cu interfaces

---

Effects of Al on the failure mechanism of the Sn-Ag-Zn eutectic solder

---

The synthesis and grain connectivity of lamellar MgB2 grains by Cu-activated sintering at low temperature

---

A JMAK-like approach for isochronal austenite-ferrite transformation kinetics of Fe-0.055 Wt.% N alloy

---

Kinetics of austenitization under uniaxial compressive stress in Fe-2.96 at.% Ni alloy

---

Corrigendum on "The accelerated formation of MgB2 bulks with high critical current density by low-temperature Cu-doping sintering"

---

The improved superconductive properties of MgB2 bulks with minor Cu addition through reducing the MgO impurity

---

Intermediate decomposition of metastable Cu5Zn8 phase in the soldered Sn-Ag-Zn/Cu interface

---

Martensite-austenite transformation kinetics of high Cr ferritic heat-resistant steel

---

Microstructure and interface evolution of Sn-2.5Bi-1.4In-1Zn-0.3Ag/Cu joint during isothermal aging

---

Phase transformations in WB36 heat resistant steel under continuous cooling conditions

---

Phase Transformation Behavior and Microstructural Control of High-Cr Martensitic/Ferritic Heat-resistant Steels for Power and

---

Structural refinement of Cr13Ni5Mo2 supermartensitic stainless steel during single-stage intercritical tempering

---

Comparison of carbon-doped MgB2 bulks fabricated from pre-synthesized Mg/CNT and Mg/amorphous carbon composites

---

Pinning behavior of glycine-doped MgB2 bulks with excellent critical current density by Cu-activated low-temperature sinterin

---

Improved toughness and ductility in ferrite/acicular ferrite dual-phase steel through intercritical heat treatment

---

Effects of aging on microstructure evolution and mechanical properties of high-temperature Zn-4Al-3Mg solder

---

Development of ferrite/bainite bands and study of bainite transformation retardation in HSLA steel during continuous cooling

---

Effect of dissolution and precipitation of Nb on the formation of acicular ferrite/bainite ferrite in low-carbon HSLA steels

---

Microstructure evolution and martensitic transformation behaviors of 9Cr-1.8W-0.3Mo ferritic heat-resistant steel during quen

---

Effects of MgO evolution on the critical current density in bulk MgB2 containing histidine

---

The microstructures and superconducting properties of FeSe0.5Te0.5 bulks with original milled powders

---

Precipitation kinetics of M23C6 in T/P92 heat-resistant steel by applying soft-impingement correction

---

Influence of austenitization temperature on phase transformation features of modified high Cr ferritic heat-resistant steel

---

Microstructural evolution of oxide-dispersion-strengthened Fe-Cr model steels during mechanical milling and subsequent hot pr

---

Significant enhancement of critical current density in Gly-doped MgB2 bulk by tailoring the formation of MgO

---

Oxide-dispersion-strengthened (ODS) ferritic steels of Fe-9Cr-0.3Y2O3 and Fe-9Cr-0.2Ti-0.3Y(2)O(3) (in mass) incorporating na

---

Precipitation behavior and martensite lath coarsening during tempering of T/P92 ferritic heat-resistant steel

---

Relationship between austenite stability and martensite formation in modified 9Cr-1Mo steel

---

Effect of acicular ferrite on banded structures in low-carbon microalloyed steel

---

Evolution of creep damage in a modified ferritic heat resistant steel with excellent short-term creep performance and its oxi

---

Fishtail effects and improved critical current density in polycrystalline bulk MgB2 containing carbon nanotubes

---

Variation of pinning mechanism and enhancement of critical current density in MgB2 bulk containing self-generated coherent Mg

---

Kinetics of Martensite Formation in Substitutional Fe-Al Alloys: Dilatometric Analysis

---

Formation Mechanism of Nanoscale Oxide Particles in Mechanically Milled Fe-Cr Oxide-Dispersion-Strengthened Steels

---

Research on splitting phenomenon of isochronal martensitic transformation in T91 ferritic steel

---

Size and structure evolution of yttria in ODS ferritic alloy powder during mechanical milling and subsequent annealing