wxy@tju.edu.cn
微电子学与固体电子学
未公开
副教授
精密金属箔电阻芯片用耐高温粘箔复合胶及其制备方法,

---

xxx

---

低电压高量子效率微光探测器及阵列

---

×××(子课题)

---

耐高温、耐高湿涂料用于金属膜电阻器的封装工艺方法

---

基于电催化反应Ni-W、Ni-Mo 提高Cr-Si高阻薄膜耐湿热性能研究
精密金属箔电阻芯片用耐高温粘箔复合胶及其制备方法

---

具有高热稳定性和低TCR的富硅Cr-Si基电阻膜及其制备方法

---

基于电催化性能提高Cr-Si高阻膜电阻器耐湿热性能的方法

---

一种提高精密金属膜电阻耐湿热性能的涂料及其制备方法

---

提高聚噻吩固体钽电容性能一致性的真空自动控制系统设计及实现方法

---

工作于室温的金属氧化物基乙醇气敏传感器制备方法

---

一种降低PEDOT固体钽电容器漏电流的方法

---

利用碳纳米管掺杂的PEDOT薄膜的制备方法

---

一种提高钼酸锂微波介质陶瓷品质因数的制备方法

---

一种花状三元金属氧化物半导体偏锡酸锌的制备方法

---

一种高透光ZAO导电薄膜的制备方法

---

一种3D立方体框架结构三元金属氧化物半导体偏锡酸锌的制备方法
已转化

---

已授权并获转化

---

已公示

---

已公示

---

已授权

---

已公示

---

已授理

---

已授理

---

已授权

---

已公示

---

已公示

---

已公示
Structural inheritance and change from ZnSn(OH)6 to ZnSnO3 compounds used for ethanol sensors: Effects of oxygen vacancies, t

---

Improving ethanol sensitivity of ZnSnO3 sensor at low temperature with multi-measures: Mg doping, nano-TiO2 decorati

---

Preparation of transparent amorphous ZnSnO3 cubic nanoparticles and light-induced homostructures: Application in UV sensor an

---

Influence of the addition of nano-TiO2 and ZnO on the sensing performance of micro-ZnSnO3 ethanol sensors under UV illuminati

---

Synthesis of 3D flower-like ZnSnO3 and improvement of ethanol-sensing properties at room temperature based on nano-TiO2 deco

---

Preparation and characteristics of polyimide/CaMoO4 nanocomposites with enhanced dielectric performance and thermal stability

---

Mechanism on M (M=Ni, Mo, Ni-Mo) as deep level impurity reducing the TCR of Si-rich CreSi resistive films

---

UV-enhanced ethanol-sensing properties of TiO2-decorated ZnSnO3 hollow microcubes at low temperature

---

Improvement of reliability for high-ohmic Cr–Si thin film resistors in a heat and humid environment: Removing moisture source

---

Preparation of Li2MoO4 using aqueous solution method and microwave dielectric properties after sintering

---

Degradation behavior and mechanism of polymer films for high-ohmic resistor protection in a heat and humid environment

---

Structure and electrical properties of quaternary Cr-Si-Ni-W films prepared by ion beam sputter deposition

---

Thermosetting polyimide resin matrix composites with interpenetrating polymer networks for precision foil resistor chips base

---

Deposition of Cr-Si-Ni-Mo films at a low sputtering current and performance of heat and humid resistance

---

Investigation on powder metallurgy Cr-Si-Ta-Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance

---

Effects of metal Ni with catalytic activity on magnetron sputtered Cr-Si resistive film in a heat and humid environment

---

Thin film chip resistors with high resistance and low temperature coefficient of resistance

---

金属膜电阻器用高阻靶材制备工艺研究

---

PF/EP/nano-SiO2 composite paint for resistor

---

全钽全密封液体钽电解电容器

---

Synthesis of strong-magnetic nanosized black pigment ZnxFe(3-x)O4