杨振文 副教授
焊接与先进技术制造
电话： **
Email： yangzw@tju.edu.cn
研究所： 焊接与先进制造技术研究所
个人简历
1. 工作经历
2017/11-今 天津大学，材料学院，副教授，研究生导师
2013/07-2017/11 天津大学，材料学院，讲师，研究生导师
2. 教育背景
2015/11-2016/12 美国 弗吉尼亚理工大学，访问****
2010/09-2013.06 哈尔滨工业大学，材料加工工程，博士
2008/09-2010/07哈尔滨工业大学，材料加工工程，硕士
2004/09-2008/07哈尔滨工业大学，焊接技术与工程，学士
3. 主讲课程
《传输原理》，《材料分析测试方法》，《钎焊》等
4. 学术兼职
Materials and Design, Journal of Alloys and Compounds, Ceramics International, Journal of Materials Technology, Materials Characterization, Journal of Materiomics, Archives of Civil and Mechanical Engineering等国际期刊审稿人；第一作者或通讯作者发表SCI论文40余篇。

研究方向
新材料及异种材料连接
钎焊与扩散焊
金属增材制造

承担项目
基于竞争反应调控的SiO2-BN复合陶瓷与金属钎焊机理研究，国家自然科学基金项目
陶瓷封接新技术的研究与应用，军工项目
基于组织控制的Ti2AlNb基合金紧密连接内在机制及其接头疲劳行为分析，国家自然科学基金项目
大型导管架结构关键焊缝焊接工艺及裂纹预防措施研究项目，横向课题项目

标志性成果
Q.W. Qiu, Y.Wang,Z.W. Yang*,X. Hu, D.P.Wang. Microstructure and mechanical properties of TiAl alloy joints vacuum brazed with Ti-Zr-Ni-Cu brazing powder without and with Mo additive. Materials and Design, 90,2016,650-659. SCI, IF=3.997
Q.W. Qiu, Y. Wang,Z.W. Yang*,D.P. Wang. Microstructure and mechanical properties of Al2O3 ceramic and Ti6Al4V alloy joint brazed with inactive Ag-Cu and Ag–Cu+B. Journal of the European Ceramic Society, 36,8,2016,2067-2074. SCI, IF=2.933
Y.Wang,Z.W.Yang*,L.X.Zhang, D.P.Wang, J.C. Feng. Low-temperature diffusion brazing of actively metallized Al2O3 ceramic tube and 5A05 aluminum alloy. Materials and Design, 86,2015,328-337. SCI, IF=3.997
X.J. Di, M. Li,Z.W. Yang*,B.S. Wang, X.J. Guo. Microstructural evolution, coarsening behavior of vanadium carbide and mechanical properties in the simulated heat -affected zone of modified medium manganese steel. Materials and Design, 96,2015,232-240. SCI, IF=3.997
X.Q. Cai, Y.Wang,Z.W. Yang*,D.P. Wang, Y.C. Liu. Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti/Ni interlayer:
microstructure characterization and mechanical properties. Journal of Alloys and Compounds, 679,2016,9-17. SCI, IF=3.014
Y. Wang, X.Q. Cai,Z.W. Yang*,Q.W. Qiu, D.P. Wang, Y.C. Liu. Microstructure evolution and mechanical properties of Ti-22Al-25Nb alloy joints brazed with Ti-Ni-Nb alloy. Materials Chemistry and Physics, 182,2016,488-497. SCI, IF=2.101
G.B. Niu, D.P. Wang,Z.W. Yang*,Y. Wang. Microstructure and mechanical properties of Al2O3/TiAl joints brazed with B powders reinforced Ag-Cu-Ti based composite fillers. Ceramics International, 43, 2017,439-450. SCI, IF=2.758
N. Wang, D.P. Wang,Z.W. Yang*,Y. Wang. Interfacial microstructure and mechanical properties of zirconia ceramic and niobium joints vacuum brazed with two Ag-based active filler metals. Ceramics International, 42,11,2016,12815-12824.SCI, IF=2.758
Z.W. Yang*, C.L. Wang, Y. Wang, L.X. Zhang, D.P. Wang, J.C. Feng. Active metal brazing of SiO2-BN ceramic and Ti plate with Ag-Cu-Ti+BN composite filler. Journal of Materials Science &Technology, 33, 2017,1392-1401. SCI, IF=2.267
Z.Y. Zhu, C.Y. Deng, Y. Wang,Z.W. Yang*,J.K. Ding, D.P. Wang. Effect of post weld heat treatment on the microstructure and corrosion behavior of AA 2219 aluminum alloy joints welded by variable polarity TIG. Materials and Design, 65,2015,1075-1082. SCI, IF=3.997