崔雷 讲师
焊接与先进技术制造
电话： **
Email： leicui@tju.edu.cn
研究所： 焊接与先进制造技术研究所
个人简历 崔雷，1985年9月生，辽宁阜新人，2014年12月毕业于天津大学获得博士学位，2015年12月留校工作至今。现任天津大学材料科学与工程学院先进研究与制造技术研究所讲师、硕士生导师，主要从事先进摩擦焊接技术及装备、海洋工程焊接关键技术、焊接结构性能与可靠性等方面的科研和教学工作。承担国家自然科学基金青年项目1项、天津大学自主创新基金1项、企业合作项目若干项，参加和完成国家自然科学基金重点项目、国家十二五863计划项目等。

研究方向 （1）先进摩擦焊接技术及装备
（2）海洋工程焊接关键技术
（3）焊接结构性能与可靠性



承担项目 (1) 低活化钢搅拌摩擦焊超细晶组织演变行为及强化机制 国家自然科学基金青年项目 在研 项目负责人
(2) 火箭贮箱拉拔式摩擦塞焊工艺与接头性能 天津大学自主创新基金 在研 项目负责人
(3) 海油工程、中石油、航天运载火箭企业合作课题 在研 项目负责人
(4) 高热强性低活化钢组织设计及其搅拌摩擦焊接 国家自然科学联合基金重点项目 在研 主要参加人（搅拌摩擦焊部分研究内容）
(5) 基于摩擦叠焊的水下结构物修复关键技术研究 国家十二五863计划 已完成 主要完成人（负责水下设备研制与焊接工艺开发）



标志性成果 发表论文（第一作者和通讯作者）：
1.Cui L,Yang X, Wang D, Cao J:Underwater friction taper plug welding process and mechanical properties of joints for DH36 steel.Hanjie Xuebao/Transactions of the China Welding Institution2016,37:75-79.
2.Cui L,Yang X, Wang D, Cao J, Xu W:Experimental study of friction taper plug welding for low alloy structure steel: Welding process, defects, microstructures and mechanical properties.Materials and Design2014,62:271-281.
3.Cui L,Yang X, Wang D, Hou X, Cao J, Xu W:Friction taper plug welding for S355 steel in underwater wet conditions: Welding performance, microstructures and mechanical properties.Materials Science and Engineering A2014,611:15-28.
4. Cui L,Yang X, Xie Y, Hou X, Song Y:Process parameter influence on defects and tensile properties of friction stir welded T-joints on AA6061-T4 sheets.Materials and Design2013,51:161-174.
5.Cui L, Yang X, Zhou G, Xu X, Shen Z:Characteristics of defects and tensile behaviors on friction stir welded AA6061-T4 T-joints.Materials Science and Engineering A2012,543:58-68.
6. Du B,Cui L*, Yang X, Wang D, Sun Z:Weakening mechanism and tensile fracture behavior of AA 2219-T87 friction plug welds.Materials Science and Engineering A2017,693:129-135.
7. Du B, Sun Z, Yang X,Cui L*, Song J, Zhang Z:Characteristics of friction plug welding to 10mm thick AA2219-T87 sheet: Weld formation, microstructure and mechanical property.Materials Science and Engineering A2016,654:21-29.
8. Li S, Yang X,Cui L*, Yin Y:Influence of weld geometry and process parameters on the quality of underwater wet friction taper plug welding.International Journal of Advanced Manufacturing Technology2016,86:2339-2351.
9. Yin Y, Yang X,Cui L*, Cao J, Xu W:Investigation on welding parameters and bonding characteristics of underwater wet friction taper plug welding for pipeline steel.International Journal of Advanced Manufacturing Technology2015,81:851-861.
10. Yin Y, Yang X,Cui L*, Cao J, Xu W:Microstructure and mechanical properties of underwater friction taper plug weld on X65 steel with carbon and stainless steel plugs.Science and Technology of Welding and Joining2016,21:259-266.
11. Yin Y, Yang X,Cui L*, Wang F, Li S:Material flow influence on the weld formation and mechanical performance in underwater friction taper plug welds for pipeline steel.Materials and Design2015,88:990-998.
12. Wang F, Yang X,Cui L*, Yin Y:Fabricating Defect-Free API X65 Steel Welds under Underwater Wet Conditions using Friction Taper Plug Welding.Materials and Manufacturing Processes2016,31:2123-2129.
13. Wang F, Yang X, Yin Y,Cui L*,:Thermal process influence on microstructure and mechanical behavior for friction taper plug welding in structural steel S355.International Journal of Advanced Manufacturing Technology2017,88:3459-3466.
发表论文（合作作者）：
1. Qu R, Yang L, Tian L, Xu W, Cui L, Yin Y:Procedure analysis of friction hydro pillar processing.Jixie Gongcheng Xuebao/Journal of Mechanical Engineering2016,52:97-103.
2. Shen H, Yang X, Li D, Cui L:Microstructures and mechanical properties of 6061-T6 aluminum alloy welded by stationary shoulder friction stir welding process.Hanjie Xuebao/Transactions of the China Welding Institution2016,37:119-123.
3. Shen Z, Yang X, Zhang Z, Cui L, Li T:Microstructure and failure mechanisms of refill friction stir spot welded 7075-T6 aluminum alloy joints.Materials and Design2013,44:476-486.
4. Shen Z, Yang X, Zhang Z, Cui L, Yin Y:Mechanical properties and failure mechanisms of friction stir spot welds of AA 6061-T4 sheets.Materials and Design2013,49:181-191.
5. Song Y, Yang X, Cui L, Hou X, Shen Z, Xu Y:Defect features and mechanical properties of friction stir lap welded dissimilar AA2024-AA7075 aluminum alloy sheets.Materials and Design2014,55:9-18.
6. Song YB, Yang XQ, Cui L, Shen ZK, Hou XP:Defects and tensile properties of friction stir welded lap joints for dissimilar high-strength aluminum alloys.Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals2014,24:1167-1174.


7. Yang X, Cui L, Hou X, Yin Y:Study on the microstructures and properties of underwater friction hydro pillar/taper-pillar welded joints for dissimilar steels.Jixie Gongcheng Xuebao/Journal of Mechanical Engineering2016,52:44-51.
8. Yang XQ, Cui L, Xu XD, Zhou G:Weld defects and fatigue properties of friction stir overlap joints for 6061-T6 aluminum alloy.Hangkong Cailiao Xuebao/Journal of Aeronautical Materials2013,33:38-44.
9. Yin Y, Yang X, Cui L, Cao J, Xu W:Microstructure and properties of friction hydro pillar processed DH36 high strength steel.Hanjie Xuebao/Transactions of the China Welding Institution2014,35:109-112.
10. Zhou G, Yang XQ, Cui L, Zhang ZH, Xu XD:Study on the microstructures and tensile behaviors of friction stir welded T-joints for AA6061-T4 alloys.Journal of Materials Engineering and Performance2012,21:2131-2139.
11. Du B, Sun Z, Yang X, Cui L:Microstructure and mechanical properties of friction plug welding joints for dissimilar aluminum alloys.Jixie Gongcheng Xuebao/Journal of Mechanical Engineering2017,53:43-48.
12. Hou X, Yang X, Cui L, Zhou G:Influences of joint geometry on defects and mechanical properties of friction stir welded AA6061-T4 T-joints.Materials and Design2014,53:106-117.
13. Hou XP, Yang XQ, Cui L, Zhou G:Friction stir welding process of 6061-T4 aluminum alloy T-joints.Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals2013,23:3048-3055.
14. Li D, Yang X, Cui L, He F, Shen H:Effect of welding parameters on microstructure and mechanical properties of AA6061-T6 butt welded joints by stationary shoulder friction stir welding.Materials and Design2014,64:251-260.
15. Li D, Yang X, Cui L, He F, Zhang X:Investigation of stationary shoulder friction stir welding of aluminum alloy 7075-T651.Journal of Materials Processing Technology2015,222:391-398.
16. Li D, Yang X, Cui L, He F, Zhang X:Fatigue property of stationary shoulder friction stir welded additive and non-additive T joints.Science and Technology of Welding and Joining2015,20:650-654.
17. Wang Z, Song H, Fu D, Ji J, Cui L, Yang X:Experimental investigation on tensile fracture behavior of friction stir welded T-joints of 6061-T4 aluminum alloy.Tianjin Daxue Xuebao (Ziran Kexue yu Gongcheng Jishu Ban)/Journal of Tianjin University Science and Technology2015,48:728-733.
18. Xie YH, Yang XQ, Cui L:Microstructure and property of 6061-T4 aluminum alloy T-joints by friction stir welding under single pass and double passes.Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals2015,25:72-79.
19. Li T, Cui L:Microstructure evolution and its effect on mechanical properties of friction stir welded AZ80 magnesium alloy joint.Metallurgical and Mining Industry2015,7:6-13.