研究所

电机

学术身份

硕士研究生导师、IEEE member、中国电机工程学会会员

工作经历
2013.3至今 山东大学电气工程学院
2018.12-2019.11 法国国立高等工程技术大学(ENSAM)访问****
2011.09-2012.08 法国国立高等工程技术大学(ENSAM)助教(A.T.E.R)
第八届山东大学“青年教学能手”
2016年度山东大学青年教师课堂比赛“二等奖”

个人信息
姓名
宫金林
性别
男
出生日期
1983年6月
籍贯
山东 济宁
职称
副教授
职务
电话
**
Email
gongjinlin@sdu.edu.cn


研究方向

1. 多相电机设计&容错控制
2. 多模型协同优化设计
3. 无传感器控制
4. 伺服驱动控制

学术著作

期刊论文：1.J. Gong, H. Zhang, B. Zhao, D. Fu, F. Gillon, Proposal of a Bi-Objective Kriging Adapted Output Space Mapping Technique for Electromagnetic Design Optimization, IEEE Transactions on Magnetics, Vol. 55, No. 6, June 2019.2.J. Gong, H. Zahr, E. Semail, M. Trabelsi, B. Aslan, F. Scuiller, Design Considerations of Five-Phase Machine with Double p/3p Polarity. IEEE Transactions on Energy Conversion, Vol. 34, No. 1, March 2019, pp.12-24.3.J. Gong, F. Gillon, N. Bracikowski, Comparison of three space mapping techniques on electromagnetic design optimization. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, Vol. 37, No. 2, pp. 1-14, Feb. 2018.
4.J. Gong, F. Gillon, J. T. Canh and Y. Xu, Proposal of a Kriging Output Space Mapping Technique for Electromagnetic Design Optimization. IEEE Transactions on Magnetics, Vol. 53, No. 6, June 2017.
5.H. Zahr, J. Gong*, E. Semail, F. Scuiller. Comparison of Optimized Control Strategies of a High-speed Traction Machine with Five Phases and Bi-harmonic Electromotive Force. Energies, Vol. 9, N°. 12, pp. 952. December 2016.
6.Jinlin GONG, Bassel ASLAN, Eric SEMAIL, Frédéric GILLON. High speed functionality optimization of five-phase pm machine using 3^rd Harmonic Current. International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, No. 3, pp. 879-893, ISBN: 0332-1649, May, 2014.
7.Jinlin GONG, Alexandru Claudiu BERBECEA, Frédéric GILLON, Pascal BROCHET. Multi-objective Optimization of a Linear Induction Motor using 3D FEM. International Journal for Computation and Mathematics in Electrical and Electronic Engineering. Vol. 31, No. 3, pp. 958-971, ISBN: 0332-1649, May, 2012.
8.Jinlin GONG, Ramzi BENAYED, Frédéric GILLON, Stéphane BRISSET, Pascal BROCHET, Three-Level Adapted Output Space Mapping Technique for Bi-objective Optimization. Przegl?d Elektrotechniczny, Issue 5 of Electrical Review 2012, ISSN: 0033-2097.
9.Ramzi BEN-AYED, Jinlin GONG, Stéphane BRISSET, Frédéric GILLON, Pascal BROCHET. Proposal of a Three Levels Output Space Mapping Strategy. IEEE Transaction on Magnetic, Vol. 48 (2), pp. 671-67, Feb. 2012.
10.宫金林，王秀和. 基于多目标有效全局优化算法的直线感应电动机优化设计. 电工技术学报, 2015, Vol. 30, No. 24:32-37.
部分会议论文：
1. Jinlin Gong, Benteng Zhao, Eric Semail, Ngac-Ky Nguyen, Yanliang Xu, Seven-phase axial and radial flux in-wheel machine with three active air gaps, XXIV^th International Conference on Electrical Machines, August, 2020, Sweden.
2. B. Zhao, J. Gong, Y. Xu, E. Semail, N-k, Nguyen, N. Bracikowski, High Performance Evaluation of a Novel Topology of Five-Phase Fractional Slot Concentrated Non-Overlapping Winding, International Magnetics Conference, May, 2020, Canada.
3. V. Martin, J. Gong, B. Zhao, F. Gillon, Y. Xu, Cogging Torque Minimization of an Interior Permanent Magnet Machine Using Sub-domain Method, IEEE Conference on Electromagnetic Field Computation, Nov. 2020, Italy.
4. B. Zhao, J. Gong, T. Tong, Y. Xu, E. Semail, N-k, Nguyen, F. Gillon, A Novel Five Phase Fractional Slot Concentrated Winding with Low Space Harmonic Contents, IEEE Conference on Electromagnetic Field Computation, Nov. 2020, Italy.
5. Zhang Hao, Zhao Benteng, Gong Jinlin, Xu Yanliang, Duc Tan Vu, Ngac Ky Nguyen, Eric Semail, Tiago Jose dos Santos Moraes, Torque Optimization of a Seven-Phase Bi-harmonic PMSM in Healthy and Degraded Mode, International Conference on Electrical Machines and Systems (ICEMS), 8-2019, Harbin, China.
6. Keitaro Yanagihara, Duc Tan Vu, Ngac Ky Nguyen, Jinlin Gong, Eric Semail1, Tiago Jose dos Santos Moraes, Fault-tolerant Control for Non-sinusoidal 7-phase Permanent Magnet Machines with One Opened Phase, International Symposium on Electrical and Electronics Engineering (ISEE 2019), October 10-12, 2019, Ho Chi Minh City, Vietnam.
7. B. Zhao, J. Gong, D. T. Vu, N. Nguyen, and E. Semail, Fault Tolerant 7-phase Hybrid Excitation Permanent Magnet Machine. IEEE Conference on Electromagnetic Field Computation, Oct. 2018, China.
8. Jinlin Gong et al. Optimal Design of a Linear Induction Motor for Traction Application. International Conference on Electrical Engineering and Automatic Control (ICEEAC), 10-2015, Weihai, China.
9. Jinlin GONG, Nicolas BRACIKOWSKI, Xiuhe WANG. Magnetic modeling of a liner motor using lumped approach. International Conference on Electrical Machines and Systems (ICEMS), 10-2014, Hangzhou, China.
10. Jinlin Gong et al. Fast Optimization of a Linear Induction Motor by 3-Level Space Mapping Technique. 9th International Symposium on Linear Drives for Industrial Applications (LDIA). 7-2013, Hangzhou, China.
11. Jinlin Gong, Frédéric Gillon, Pascal Brochet. Optimal Design of a Linear Induction Motor for Subway System Using Finite Element Method. International Conference on Electrical Machines and Systems (ICEMS), 8-2011, Beijing, China.
12. Jinlin Gong, Alexandru Claudiu Berbecea, Frédéric Gillon, Pascal Brochet. Magnetic and Thermal 3D Finite Element Model of a Linear Induction Motor. Vehicle Power and Propulsion Conference (IEEE VPPC), Sep. 1-3, 2010, Lille, France.

承担科研项目

主持国家自然基金青年项目、教育部留学人员科研启动基金、山东省重点研发计划和企业课题两项

学术类型

学术硕士、专业硕士

---