), 贾德君 大连海事大学 船舶与海洋工程学院, 辽宁 大连 116026
收稿日期:2020-02-03出版日期:2021-06-28发布日期:2021-06-30通讯作者:李范春E-mail:lee_fc@126.com作者简介:张源(1996-),男,四川省巴中市人,硕士生,主要从事金属增材制造技术数值模拟研究基金资助:教育部“双一流”学科建设基金项目(SSCXXM030)Design and 3D Printing Simulation of a Lattice Compressor Impeller
ZHANG Yuan, LI Fanchun(), JIA Dejun Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, Liaoning, China
Received:2020-02-03Online:2021-06-28Published:2021-06-30Contact:LI Fanchun E-mail:lee_fc@126.com摘要/Abstract
摘要： 以压气机叶轮为研究对象,基于八角桁架点阵结构,设计了一种新型轻量化点阵压气机叶轮,通过选择性激光熔融(SLM)280型金属3D打印机对设计叶轮的可加工性进行了验证.为了解其3D打印性能,基于有限单元法(FEM)对点阵轮的3D打印过程进行了模拟.在保证利用数值方法研究3D打印过程可行的基础上,对不同功率下点阵轮的打印过程进行了分析,并与相同工况下的实心压气机叶轮进行了对比.结果表明:点阵轮与实心轮的层变形是一个逐层叠加递增的过程,在本文的7种工况下,点阵轮打印完成时的最大残余变形与残余应力均小于实心轮.点阵轮的最大残余变形最大可比实心轮小20.19%,最大残余应力可比实心轮小10.69%.这意味着点阵轮除了比实心轮具有更轻的质量,还将比实心轮具有更优异的打印性能.
关键词: 金属点阵结构叶轮, 金属3D打印, 数值模拟, 有限单元法
Abstract: Taking the compressor impeller as the research object, and based on the octagonal truss lattice structure, a novel lightweight lattice compressor impeller is designed, and its machinability is verified by using a SLM280 3D printer. In order to understand its 3D printing performance, the 3D printing process of the lattice impeller is simulated based on the finite element method (FEM). Based on the feasibility of using the numerical method to study the 3D printing process, the printing process of the lattice impeller at different power values is analyzed and compared with the solid compressor impeller under the same working condition. The results show that the layer deformation of the lattice impeller and the solid impeller is a process that increases layer by layer. Under the 7 working conditions studied in this paper, the maximum residual deformation and residual stress of the lattice impeller after printing are less than those of the solid impeller. The maximum residual deformation of the lattice impeller can be 20.19% smaller than that of the solid impeller, and the maximum residual stress can be 10.69% smaller than that of the solid impeller. This means that the lattice impeller is not only lighter, but also has a better printing performance than the solid impeller.
Key words: metal lattice structure impeller, 3D printing of metal, numerical simulation, finite element method (FEM)
PDF全文下载地址:
点我下载PDF
