张勇


1、基本信息
姓名：张勇
职称：教授
电话：　
邮箱：yong_zhang@sjtu.edu.cn
主页：scce.sjtu.edu.cn
通讯地址：上海市东川路800号化学化工学院A楼337室
2、教育经历
1980-1984 成都科技大学（现四川大学）高分子系学士
1984-1987 成都科技大学高分子研究所硕士
1997-1992 成都科技大学高分子研究所博士
1990-1992 英国拉夫堡（Loughborough)大学联合培养博士研究生
3、工作经历
1992-1993 上海交通大学应用化学系
1993-1997 上海交通大学化学化工学院副教授授
1997-至今 上海交通大学化学化工学院教授
2005德国斯图加特大学高分子研究所访问****

4、研究方向
（1） 聚合物加工与改性
（2）橡胶化学与工艺学
（3）聚合物共混物与复合材料
5、科研项目
主持国家自然科学基金面上项目以及多项国际和国内企业合作科研项目。
6、荣誉奖励
（1）1997 上海市育才奖
（2）2005 国家级教学成果奖二等奖
（3）2010 上海市发明二等奖
7、学术兼职
中国化工学会橡胶专业委员会副主任
8、教学工作
本科生课程：高分子化学（1993～）

8、代表性论文

1.Song, Shiqiang; Zhai, Yinghao; Zhang, Yong*. BioinspiredGraphene Oxide/Polymer Nanocomposite Paper with High Strength, Toughness, andDielectric Constant. ACS Applied Materials & Interfaces. DOI:10.1021/acsami.6b08606.
2.Jiang, Guiyang; Song, Shiqiang; Zhai, Yinghao;Feng, Chi, Yong Zhang*. Improving the filler dispersion ofpolychloroprene/carboxylated multi-walled carbon nanotubes composites bynon-covalent functionalization of carboxylated ionic liquid. Composites Scienceand Technology. 123, 171-178, 2016
3.Li, Wenjun; Zhai, Yinghao; Yi, Peiyun;Zhang, Yong. Fabrication of micro-pyramid arrays on PETG films by roll-to-roll hotembossing. Microelectronic Engineering. 164, 100-107, 2016.
4.Wang, Chunwei; Liu, Zijin; Wang, Shifeng; Zhang, Yong*. Preparation and properties ofoctadecylamine modified graphene oxide/styrene-butadiene rubber compositesthrough an improved melt compounding method. Journal of Applied Polymer Science. 133,42907, 2016
5.Wang, Jinyuan; Wan, Chaoying; Zhang, Yong;Zhai, Yinghao; Song, Shiqiang; Ren, Wentan; Peng, Zonglin. Graftcopolymerization of methyl methacrylate from brominated poly(isobutylene-co-isoprene)via atom transfer radical polymerization. Journal of Applied Polymer Science. 133,43408, 2016.
6.Yuan, Xia; Wang, Jinyuan; Wang, Chunwei; Gao,Steven; Guo, Sharon; Zhang, Yong*. Influenceof 1,2-polybutadiene on properties of dicumyl peroxide cured brominated butylrubber 133, 43280, 2016
7.Zhang, Xuzhen; Zhang,Yong*. Reinforcement effect of poly(butylene succinate)(PBS)-graftedcellulose nanocrystal on toughened PBS/polylactic acid blends. CarbohydratePolymers. 140, 374–382, 2016.
8.Zhang, Xuzhen; Ma, Piming, Zhang, Yong*. Structure and properties ofsurface-acetylated cellulose nanocrystal/poly(butyleneadipate-co-terephthalate) composites. Polymer Bulletin. DOI10.1007/s00289-015-1594-y, 2016
9.Jiang, Guiyang; Wang, Chunwei; Liu, Zijin; Zhai, Yinghao; Zhang, Yong*; Jiang, Jie，Moriguchi, Nobuhiro; Zhu, Jun; and Yamana, Yoshihiro. Characterization ofpolypropylene/hydrogenated styrene-isoprene-styrene block copolymer blends andfabrication of micro-pyramids via micro hot embossing of blend thin-films. RSCAdvances, 5, 92212, 2015.
10.Jiang, Guiyang; Feng, Chi; Zhang, Hongmei; Zhang, Yong*; Yamagishi, Uichiro; Toya,Hideki; Fujii Nobuhiko. Compatibility and nonlinear viscoelasticity ofpolychloroprene/polyvinyl chloride blends with nitrile butadiene rubber as acompatibilizer. Journal of Applied Polymer Science. 132 (35), 42448, 2015
11.Song, Shiqiang; Wan, Chaoying*; Zhang, Yong*. Non-covalent functionalizationof graphene oxide by pyrene-block copolymers for enhancing physical propertiesof poly(methyl methacrylate). RSC Advances, 5, 79947–79955, 2015
12. Wu, Wenjing;Wan, Chaoying: Zhang, Yong*.Graphene oxide as a covalent-crosslinking agent for EVM-g-PA6 thermoplasticelastomeric nanocomposites. RSC Advances, 5, 39042–39051,2015.
13. Zhang,Xuzhen; Zhang, Yong*.Poly(butylene succinate-co-butylene adipate)/cellulose nanocrystalcompositesmodified with phthalic anhydride. Carbohydrate Polymers. 134, 52–59, 2015.
14. Zhang,Hongmei*; Wang, Chunwei; Zhang Yong.Preparation and Properties of Styrene-Butadiene Rubber Nanocomposites Blendedwith Carbon Black-Graphene Hybrid Filler. Journal of Applied PolymerScience. 132, 41309, 2015
15. Feng, C, Zhang, H, Zhang, Y*.Nonlinear viscoelasticity and stress-softening behavior of chloroprene rubberreinforced by multiwalled carbon nanotubes. Polymer Composites, 2014. DOI 10.1002/pc.22884
16. Ma, P*; Cai, X; Zhang Y; Wang, S; Dong, W; Chen M; Lemstra. P. In-situ compatibilization ofpoly (lactic acid) and poly (butylene adipate-co-terephthalate) blends by usingdicumyl peroxide as a free-radical initiator. Polymer Degradation andStability, 102: 145-151, 2014.
17. Lu, X; Zhang, H; Zhang Y*.Study on ester-amide exchange reactions between Nylon 1010 and Ethylene-vinylacetate rubber with different metal derivatives. Journal of Polymer Research.21(10): 1-10, 2014
18. Lu X, Zhang H, Zhang Y*.Study on ester-amide exchange reactions between Nylon 1010 and Ethylene‐vinyl acetate rubber. Journal ofApplied Polymer Science. 131(7), 40064, 2014.
19. Lu X, Zhang H, Zhang Y*. Structure and properties of nylon 1010/ethylene‐vinyl acetate rubber–based dynamically vulcanized thermoplastic elastomersfilled with SiO₂. Polymer Engineering & Science. 55(3), 581-588, 2014.
20. Wu, W; Zhai, Y; Zhang Y*,Ren, W. Mechanical and microwave absorbing properties of in situ prepared hydrogenated acrylonitrile–butadiene rubber/rare earthacrylate composites. Composites Part B: Engineering. 56: 497-503, 2014.
21. Wu, W; Wan, C; Wang, S; ZhangY*. Reactive processing of ethylene-vinyl acetate rubber/polyamide blendsvia a dynamic transesterification reaction. Polymer Bulletin, 71(6): 1505-1521.2014
22. Wu, W; Wan, C; Zhang H; Zhang,Y*. In situ ester-amide exchange reaction between polyamide 6 andethylene‐vinyl acetate rubber during melt blending. Journal of AppliedPolymer Science, 131(10), 40272-40283, 2014
23. Xing Y, Bai X, Zhang, Y*. Mechanical, thermal conductive,and dielectric properties of fluoroelastomer/reduced graphene oxide composites in situ prepared by solvent thermalreduction. Polymer Composites, 2014, 35(9): 1779-1785.
24. 吴文敬，任文坛，禹海洋，杜爱华，张勇*，张隐西，乙烯-醋酸乙烯酯橡胶的共混改性. 高分子材料科学与工程. 2014，30（2）：186-191
25. 翟滢皓，张勇*，橡胶吸波材料的研究进展，高分子通报，2014，（5），33-40
26. Li Zhiguo*, Wu Wenjing, Chen Hong, Zhu Zhenhua, Wang Youshan, Zhang Yong. Thermal conductivity ofmicro/nano filler filled polymeric composites. RSC Advances. 3(18), 6417-6428,2013.
27. Wu, Wenjing; Wan, Chaoying; Zhang,Yong*. Morphology and mechanical properties of ethylene-vinyl acetaterubber/polyamide. Journal of Applied Polymer Science. 130 (1), 338-344, 2013.
28. Wenjing Wu, Chaoying Wan, Shifeng Wang, Yong Zhang*. Physical properties and crystallization behavior of ethylene-vinylacetate rubber/polyamide/graphene oxide thermoplastic elastomer nanocomposites.RSC Advances, 3, 26166–26176, 2013.
29. Xu, Shengjie; Ren, Wentan*; Zhang,Yong; Yinxi Zhang. Study on the Preparation of Eu(Pht)3Phen/SBA-15 Hybridsand Photoluminescence Properties of Silicone Rubber Composites with the Hybrids.Journal of Applied Polymer Science. 128(4), 2375-2384, 2013.
30. Zhang, Shuang; Zhai, Yinghao; Zhang,Yong*. Microwave-Absorbing Performance and Mechanical Properties of Poly(vinylchloride)/Acrylonitrile–Butadiene Rubber Thermoplastic Elastomers Filled withMultiwalled Carbon Nanotubes and Silicon Carbide, Journal of Applied Polymer Science. 130(1),345-351, 2013.
31. Chen, Biyan; Ma, Nan; Bai, Xin; Zhang, Hongmei; Zhang Yong*. Effects of graphene oxideon surface energy, mechanical, damping and thermal properties ofethylene-propylene-diene rubber/petroleum resin blends. RSC Advances. 2,4683–4689, 2012
32. Han, Y; Fan ZY; Lu, ZQ*, Zhang,Y; Li SM*. In vitro Degradation of Poly[(L-lactide)-co-(trimethylenecarbonate)] Copolymers and a Composite with Poly[(L-lactide)-co-glycolide] Fibersas Cardiovascular Stent Material. Macromol. Mater. Eng. 297, 128–135, 2012
33. Li, Zhiguo*; Chen, Hong; Cai, Linfeng; Zhu, Zhenhua; Wang, Youshan; Zhang, Yong. Prediction of thermalconductivity of SiC-filled emulsion-polymerized styrene-butadiene rubbercomposites by finite element method. Journalof Reinforced Plastics and Composites. 31(22) 1586–1598, 2012
34. Li,Zhiguo; Ren, Wentan; Chen, Hong; Ye, Liqing; Zhang, Yong*. Effect of liquid isoprene rubber on dynamicmechanical properties of emulsionpolymerized styrene/butadiene rubbervulcanizates. Polymer International, 61(4), 531-538, 2012
35. Liu, Q; Ren*, WT; Zhang, Y;Zhang, YX. A study on the curing kinetics of epoxycyclohexyl polyhedraloligomeric silsesquioxanes and hydrogenated carboxylated nitrile rubber bydynamic differential scanning calorimetry. Journal of Applied Polymer Science. 123(5), 3128-3136, 2012.
36. Li, M; Ren, WT*; Zhang, Y;Zhang, YX. Study on properties of gel polymer electrolytes based on ionicliquid and amine-terminated butadiene-acrylonitrile copolymer chemicallycrosslinked by polyhedral oligomeric silsesquioxane. Journal of Applied PolymerScience. 126, 273–279, 2012
37. Li, M; Ren, WT*; Zhang, Y;Zhang, YX. Study on preparation and properties of gel polymer electrolytesbased on comb-like copolymer matrix of poly(ethylene glycol) monomethylethergrafted carboxylated butadiene-acrylonitrile rubber. Journal of PolymerResearch. 19, 9853, 2012
38. Zhang, Q; Li, M; Ren, WT*; Zhang,Y. Improved Ionic Conductivity of NBR/Epoxy Resin/LiClO4 Composites byAdding Ionic Liquid. Journal of Macromolecular Science, Part B: Physics. 51, 1041-1048,2012
39. Ma, P; Hristova-Bogaerds, DG; Goossens, JGP; Spoelstra AB; Zhang, Y; Lemstra PJ. Toughening ofpoly(lactic acid) by ethylene-co-vinyl acetate copolymer with different vinylacetate contents. European Polymer Journal 48, 146-154, 2012
40. Zhai, YH; Wu, WJ; Zhang, Y*; Ren WT. Enhanced microwaveabsorbing performance of hydrogenated acrylonitrile–butadienerubber/multi-walled carbon nanotube composites by in situ prepared rare earthacrylates. Composites Science and Technology., 72(6), 696–701, 2012.
41. Zhai, YH; Zhang, Y*; Ren WT. Electromagneticcharacteristic and microwave absorbing performance of different carbon-basedhydrogenated acrylonitrile–butadiene rubber composites. Materials Chemistry andPhysics. 133，176-181, 2012