安庆龙 副研究员
所在系所制造技术与装备自动化研究所
办公电话
通讯地址上海交大机械与动力工程学院A楼720室
电子邮件qlan@sjtu.edu.cn
个人主页


教育背景 2003-2006南京航空航天大学机械制造及自动化专业博士
2001-2003南京航空航天大学机械制造及自动化专业硕士
1995-1999山东理工大学机械制造及自动化专业学士

工作经历 2006―2009 上海交通大学机械工程博士后流动站 博士后
2009―2015 上海交通大学机械与动力工程学院 讲师
2016―至今 上海交通大学机械与动力工程学院 副研究员、博士生导师

出访及挂职经历 2014-2015 美国Worcester Polytechnic Institute 访问****

研究方向 1. 切削过程仿真与智能加工
2. 复合材料高效加工
3. 结构损伤与抗疲劳制造
4. 清洁切削与绿色制造

科研项目 2020-2023 国家自然科学基金面上项目“面向疲劳性能强化的SiCf/SiC复合材料激光辅助超声铣削技术研究”，负责人
2019-2021 国家国家重点研发计划重点专项子课题“微量润滑切削机理与智能化微量润滑系统设计理论及方法”，负责人
2015―2018 国家自然科学基金面上项目“基于制孔精度和孔壁质量控制模型的复合材料抗疲劳机械连接方法研究”，负责人
2016―2018 国家科技重大专项子课题“航天大型复杂复合材料构件成套制造装备及示范生产线”，负责人
2017―2018 航天先进技术联合研究中心技术创新项目“高速复合材料储能飞轮制造技术研究”，负责人
2013―2015 国家863计划项目子课题“复合材料/合金叠层构件高效精密制孔工艺技术及装备”，负责人
2012―2014 国家自然科学基金青年项目“基于分层损伤模型的CFRP/钛合金叠层结构高效制孔专用刀具与工艺优化研究”，负责人
2012―2015 国家科技重大专项子课题“复杂数控刀具创新能力平台建设”，负责人
2012―2014 教育部博士点基金“基于分层损伤模型的CFRP/钛合金叠层结构高效制孔刀具与工艺优化研究”，负责人
2010―2014 国家973计划项目“大型薄壁构件塑变与去除成形及其内应力与表面完整性主动控制”，学术骨干
2013―2016 国家自然科学基金“基于多时空力-热耦合作用的高速切削锯齿形切屑形成机制及其对刀具磨损影响规律”，第二负责人
2007―2009 国家自然科学基金项目“基于力－热耦合作用的难加工材料高速切削物理建模与仿真研究”，第二负责人
2013―2014 企业合作项目“钛合金车削加工工艺及其加工圆度检测技术研究”，负责人

代表性论文专著 专著/译著：
1. 陈明，安庆龙，刘志强. 《高速切削技术基础与应用》，上海科学技术出版社，2012年10月
2. 陈明，安庆龙，明伟伟 译. 《复合材料制孔技术》，国防工业出版社，2013年8月
3. 安庆龙，陈明，宦海祥 译. 《复合材料加工技术》，国防工业出版社，2016年1月
4. 陈明，明伟伟，安庆龙.《民用飞机构件数控加工技术》，上海交通大学出版社，2016年12月
5. 陈明，徐锦泱，安庆龙著.《碳纤维复合材料与叠层结构切削加工理论及应用技术》，上海科学技术出版社，2019年1月
6. 陈明，王呈栋，安庆龙著. 《智能切削工艺与刀具》，华中科技大学出版社，2020年8月
7. 郑力，安庆龙，曲选辉等译. 《机械工程手册》，机械工业出版社，2020年11月
期刊论文：
2020年：
1. An, Q., Dang, J., Li, J., Wang, C., Chen, M.Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences(2020) Composite Structures, 253, 论文编号 112794.
2. An, Q., Cai, C., Zou, F., Liang, X., Chen, M.Tool wear and machined surface characteristics in side milling Ti6Al4V under dry and supercritical CO2 with MQL conditions(2020) Tribology International, 151, 论文编号 106511.
3. Chen, J., An, Q., Ming, W., Chen, M.Investigation on machined surface quality in ultrasonic-assisted grinding of Cf/SiC composites based on fracture mechanism of carbon fibers(2020) International Journal of Advanced Manufacturing Technology, 109 (5-6), pp. 1583-1599.
4. Zou, F., Dang, J., Cai, X., An, Q., Ming, W., Chen, M.Hole quality and tool wear when dry drilling of a new developed metal/composite co-cured material(2020) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234 (6-7), pp. 980-992.
5. An, Q., Zou, F., Cai, X., Gao, M., Chen, M.Experimental investigation on the machinability of CFRP/Invar36 hybrid co-cured material in turning operations(2020) International Journal of Advanced Manufacturing Technology, 107 (9-10), pp. 3715-3726.
6. Dang, J., Zhang, H., Ming, W., An, Q., Chen, M.New observations on wear characteristics of solid Al2O3/Si3N4 ceramic tool in high speed milling of additive manufactured Ti6Al4V(2020) Ceramics nternational, 46 (5), pp. 5876-5886.
7. An, Q., Tao, Z., Xu, X., El Mansori, M., Chen, M.A data-driven model for milling tool remaining useful life prediction with convolutional and stacked LSTM network(2020) Measurement: Journal of the International Measurement Confederation, 154, 论文编号 107461.
8. An, Q., Dang, J.Cooling Effects of Cold Mist Jet with Transient Heat Transfer on High-Speed Cutting of Titanium Alloy(2020) International Journal of Precision Engineering and Manufacturing - Green Technology, 7 (2), pp. 271-282.
9. Chen, J., An, Q., Chen, M.Transformation of fracture mechanism and damage behavior of ceramic-matrix composites during nano-scratching(2020) Composites Part A: Applied Science and Manufacturing, 130, 论文编号 105756.
10. Zou, F., Chen, J., An, Q., Cai, X., Chen, M.Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools(2020) Ceramics International, 46 (4), pp. 4371-4380.
11. Dang, J., Cai, X., Yu, D., An, Q., Ming, W., Chen, M.Effect of material microstructure on tool wear behavior during machining additively manufactured Ti6Al4V(2020) Archives of Civil and Mechanical Engineering, 20 (1), 论文编号 4 .
12. Dang, J., Zou, F., Cai, X., An, Q., Ming, W., Chen, M.Experimental investigation on mechanical drilling of a newly developed CFRP/Al co-cured material(2020) International Journal of Advanced Manufacturing Technology, 106 (3-4), pp. 993-1004.
13. Ming, W., Dang, J., An, Q., Chen, M.Chip formation and hole quality in dry drilling additive manufactured Ti6Al4V(2020) Materials and Manufacturing Processes, 35 (1), pp. 43-51.
14. An, Q., Chen, J., Tao, Z., Ming, W., Chen, M.Experimental investigation on tool wear characteristics of PVD and CVD coatings during face milling of Ti[sbnd]6242S and Ti-555 titanium alloys(2020) International Journal of Refractory Metals and Hard Materials, 86, 论文编号 105091 .
2019年：
1. An Q L, Dang J Q, Liu G Y, et al. A new method for deburring of servo valve core edge based on ultraprecision cutting with the designed monocrystalline diamond tool[J]. Science China Technological Sciences, 2019, 62(10): 1805-1815.
2. An Q, Dang J, Ming W, et al. Experimental and numerical studies on defect characteristics during milling of aluminum honeycomb core[J]. Journal of Manufacturing Science and Engineering, 2019, 141(3): 031006.
3. An Q, Cai C, Cai X, et al. Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates[J]. Composite Structures, 2019, 230: 111441.
4. An Q, Dang J. Cooling Effects of Cold Mist Jet with Transient Heat Transfer on High-Speed Cutting of Titanium Alloy[J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2019: 1-12.
5. Liu G, Dang J, Ming W, An Q*, et al. High-quality machining of edges of thin-walled plates by tilt side milling based on an analytical force-based model[J]. Journal of Manufacturing Science and Engineering, 2019, 141(6): 061008.
6. Dang J, Liu G, Chen Y, An Q*, et al. Experimental investigation on machinability of DMLS Ti6Al4V under dry drilling process[J]. Materials and Manufacturing Processes, 2019, 34(7): 749-758.
7. Tao Z, An Q*, Liu G, et al. A novel method for tool condition monitoring based on long short-term memory and hidden Markov model hybrid framework in high-speed milling Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 2019: 1-18.
8. Yu D, Liu C, Wu Y, An Q*. Measurement and prediction of drilling force in fresh human cadaver mandibles: A pilot study. Clinical Implant Dentistry and Related Research, 2019.
9. Liu G, Dang J, Li C, Ming W, An Q*, Chen M. Investigation on the vibration and machined surface quality in tilt side milling of thin-walled plates. The International Journal of Advanced Manufacturing Technology, 2019: 1-14.
10. Liu G, Dang J, Chen Y, Dong D, An Q*. Numerical and experimental investigation on grinding-induced exit burr formation. The International Journal of Advanced Manufacturing Technology, 2019: 1-16.
2018年以前
1. An Q, Chen J, Cai X, et al. Thermal characteristics of unidirectional carbon fiber reinforced polymer laminates during orthogonal cutting. Journal of Reinforced Plastics and Composites, 2018, 37(13):905-916.
2. Wang, C., Wen, L., Ming, W., An, Q.*, & Chen, M. (2018). Experimental study on effects of fiber cutting angle in milling of high-strength unidirectional carbon fiber–reinforced polymer laminates. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2018, 232(10): 1813-1824.
3. Qiu, K., Ming, W., Shen, L., An, Q.*, & Chen, M. Study on the cutting force in machining of aluminum honeycomb core material. Composite Structures, 2017, 164: 58-67.
4. Wang C, An Q*, Niu Q, et al. Strain-rate sensitivity of tensile behaviors for nickel-based superalloys GH3044 and GH4033 at room temperature. Indian Journal of Engineering and Materials Sciences, 2017, 23(5):336-340.
5. An Q, Ming W, Cai X, Chen M. Study on the cutting mechanics characteristics of high-strength UD-CFRP laminates based on orthogonal cutting method, Composite Structures, 2015, 131(11): 374-383.
6. An Q, Ming W, Cai X, Chen M. Effects of tool parameters on cutting force in orthogonal machining of T700/LT03A unidirectional carbon fiber reinforced polymer laminates. Journal of Reinforced Plastics and Composites, 2015, 34(7): 591-602.
7. An Q, Ming W, Chen M. Experimental Investigation on Cutting Characteristics in Nanometric Plunge-Cutting of BK7 and Fused Silica Glasses. Materials, 2015, 8(4): 1428-1441.
8. An Q, Liu Z, Jiang L, et al. Experimental and numerical research on the effects of minimum quantity lubrication in thread turning of free-cutting steel AISI 1215. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229(5): 878-885.
9. An Q, Wang C, Xu J, et al. Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool. International Journal of Refractory Metals and Hard Materials, 2014, 43: 94-101.
10. An Q, Xu J, Wei Y, et al. An optimization investigation on surface roughness and its evolution with tool wear in dry turning of boron alloy cast iron. Indian Journal of Engineering & Materials Sciences, 2014, 21: 601-608.
11. An Q, Dong D, Zheng X, et al. A solution for micro drill condition monitoring with vibration signals for PCB drilling. Circuit World, 2013, 39(3): 147-152.
12. An Q L, Fu Y C, Xu J H. Experimental study on turning of TC9 titanium alloy with cold water mist jet cooling. International Journal of Machine Tools and Manufacture, 2011, 51(6): 549-555.
13. An Q, Fu Y, Xu J. A new technology on enhancing heat transfer during grinding of titanium alloy. Industrial Lubrication and Tribology, 2010, 62(3): 168-173.
14. An Q, Cai X, Xu J, et al. Experimental investigation on drilling of high strength T800S/250F CFRP with twist and dagger drill bits. International Journal of Abrasive Technology 16, 2014, 6(3): 183-196.
15. An Q L, Fu Y C, Xu J H. Experimental study on the cooling effects of cryogenic pneumatic mist jet impinging cooling method. International Journal of Abrasive Technology, 2008, 1(3-4): 241-250.
16. 安庆龙，牛秋林，明伟伟，陈明. 高强度合金硼铸铁组织成分与切削性能研究, 上海交通大学学报, 2012, 46(07): 1049-1053
17. Xu J, An Q, Chen M. A comparative evaluation of polycrystalline diamond drills in drilling high-strength T800S/250F CFRP. Composite Structures, 2014, 117: 71-82.
18. Xu J, An Q, Cai X, et al. Drilling machinability evaluation on new developed high-strength T800S/250F CFRP laminates. International Journal of Precision Engineering and Manufacturing, 2013, 14(10): 1687-1696.
19. Niu Q, An Q, Chen M, et al. Wear mechanisms and performance of coated inserts during face milling of TC11 and TC17 alloys. Machining Science and Technology, 2013, 17(3): 483-495.
20. Liu Z, An Q, Xu J, et al. Wear performance of (nc-AlTiN)/(a-Si 3 N 4) coating and (nc-AlCrN)/(a-Si 3 N 4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions. Wear, 2013, 305(1): 249-259.
21. Wei Y, An Q, Cai X, et al. Influence of Fiber Orientation on Single-Point Cutting Fracture Behavior of Carbon-Fiber/Epoxy Prepreg Sheets. Materials, 2015, 8(10): 6738-6751.
22. Wang C Y, Chen Y H, An Q L*, et al. Drilling temperature and hole quality in drilling of CFRP/aluminum stacks using diamond coated drill. International Journal of Precision Engineering and Manufacturing, 2015, 16(8): 1689-1697.

教学工作 1、课程名称：数字化制造
授课对象：本科生
学时数：48
学分：3
2、课程名称：弹塑性加工理论
授课对象：硕士生
学时数：48
学分：3

软件版权登记及专利 1. 专利：一种用于高速钻削加工的切削温度监测装置，授权号:ZL8.4
2. 专利：大尺寸枞树型叶根轮槽型面残余应力场重构的方法，授权号:ZL1.3
3. 专利：1000MW超临界汽轮机转子轮槽面温度场重构的方法，授权号:ZL3.2
4. 专利：轮槽精铣复合铣刀，授权号:ZL6.6
5. 专利：一种半开离心式具有长短叶片结构的整体叶轮高效加工方法,授权号:ZL8.7
6. 专利：一种整体叶轮开槽插铣加工方法,授权号:ZL0.7
7. 专利：内孔冷却聚晶金刚石螺纹高速成形刀具制造方法,授权号:ZL2.5
8. 专利：钛合金棒料车刀，授权号:ZL6.2
9. 软件：切削刀具选择与应用数据库软件（简称DBCTS&A）,V1.0版，登记号:2009SR044593
10.软件：切削试验数据管理系统软件,V1.0版，登记号:2012SR111179

学术兼职 全国刀具标准化技术委员会通用刀具分技术委员会委员
中机生产工程分会切削专业委员会委员
中国机械工业金属切削刀具技术协会切削先进技术研究分会理事
中国刀协切削先进技术研究会秘书处秘书

荣誉奖励 2020 第十二届“挑战杯”上海市大学生创业计划竞赛“优秀指导教师
2020 第六届中国“互联网+”大学生创新创业大赛上海赛区优秀指导教师
2019 第五届中国“互联网+”大学生创新创业大赛上海赛区优秀指导教师
2017 国家科技进步二等奖（排名第3）
2015 NSFC机械工程学科2014年度优秀结题项目
2014 中国机械工业科学技术奖（技术发明奖）一等奖（排名第2）
2014 聘期考核优秀
2012 上海交通大学优秀班主任
2011 上海交通大学优秀班主任
2008 教育部科学技术进步奖二等奖（排名第9）

已上传文件 111