邓宇君 副教授
所在系所薄板结构制造研究所
办公电话
通讯地址上海交大机械与动力工程学院机械楼A613室
电子邮件yjdeng@sjtu.edu.cn
个人主页https://scholar.google.com/citations?user=MtDzthEAAAAJ&hl=zh-CN&oi=ao


教育背景 2011/9 - 2017/6，上海交通大学，机械与动力工程学院，博士；
2009/9 - 2011/6，上海交通大学，机械与动力工程学院，硕士(硕博连读)；
2005/9 - 2009/6，华中科技大学，机械科学与工程学院，学士。

工作经历 2020 - 至今，上海交通大学，机械与动力工程学院，副教授；
2018 - 2020，美国西北大学，机械工程系，访问****，合作教授：黄永刚教授；
2017 - 2020，上海交通大学，机械与动力工程学院，博士后；
2015 - 2015，香港理工大学，机械工程系，研究助理，合作教授：傅铭旺教授。

研究方向 聚合物宏微观力学行为；
微纳结构大面积成形理论与技术。

科研项目 国家自然基金青年项目：聚合物表面多级褶皱结构的屈曲机理及可控成形工艺 ，2021 - 2023，负责人；
上海市科学技术委员会科研计划项目：燃料电池动力系统能量管理研究，2019 - 2021，负责人；
博士后创新人才支持计划：聚合物薄膜微细功能结构热辊压成形介观尺度效应机理与工艺研究，2017 - 2019，负责人；
博士后基金面上项目：聚合物表面微结构粉末热辊压的颗粒形变与熔接行为研究，2018 - 2020，负责人；
国防基础加强计划重点基础研究项目（原国防973）“xxx关键技术基础研究”，2018-2022 ，参与；
国家自然科学基金面上项目：柔性透明电极卷对卷压印成形的尺度效应与工艺规律研究，2017 - 2020，参与；
国家自然科学基金重点项目：薄膜表面微细结构直接热辊连续成形介观尺度效应及控形控性新方法，2013-2017，参与；
国家自然科学基金青年项目：燃料电池质子交换膜机械失效机理与预测模型，2018 - 2020，参与。

代表性论文专著 2020年
Lu D, Yan Y, Deng Y, et al. Bioresorbable wireless sensors as temporary implants for in vivo measurements of pressure. Advanced Functional Materials, 2020, 30(40): **.
Choi J, Chen S, Deng Y, et al. Skin‐interfaced microfluidic systems that combine hard and soft materials for demanding applications in sweat capture and analysis. Advanced Healthcare Materials, 2020: **.
Krishnan S R, Arafa H M, Kwon K, Deng Y, et al. Continuous, noninvasive wireless monitoring of flow of cerebrospinal fluid through shunts in patients with hydrocephalus. NPJ digital medicine, 2020, 3(1): 1-11.
Gao J, Peng L, Deng Y, et al. Experimental studies on micro powder hot embossing for high-aspect-ratio microstructures with ultra-high molecular weight polyethylene powders. Journal of Micromechanics and Microengineering, 2020, 30(11): 115011.
Wang J, Deng Y, Yi P, et al. An experimental study of recovery in embossing of polycarbonate below the glass transition temperature. Journal of Micromechanics and Microengineering, 2020, 30: 085013.
Zhang R, Xu Z, Deng Y, et al. Characterizing the back stress of ultra-thin metallic sheet via pre-strain tension/bending process. Journal of Materials Processing Technology, 2020, 279: 116560.
2019年
Reeder J T, Xue Y, Franklin D, Deng Y et al. Resettable skin interfaced microfluidic sweat collection devices with chemesthetic hydration feedback. Nature communications, 2019, 10(1): 1-12.
Huang J, Xu Z, Deng Y, et al. Electropulsing-Induced α to β Phase Transformation of Ti–6Al–4V. Journal of Manufacturing Science and Engineering, 2019, 141(11): 111012.
Wang J, Peng L F, Deng Y J, et al. A finite strain thermodynamically-based constitutive modeling and analysis of viscoelastic-viscoplastic deformation behavior of glassy polymers. International Journal of Plasticity, 2019, 122: 135-163.
Zhu Y, Deng Y, Yi P, et al. Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications. Advanced Materials Technologies, 2019, 4(10): **.
Chung H U, Kim B H, Lee J Y, et al. Binodal, wireless epidermal electronic systems with in-sensor analytics for neonatal intensive care. Science, 2019, 363(6430): eaau0780.
Deng Y, Wang J, Yi P, et al. Numerical studies on size effect behaviors of glassy polymers based on strain gradient elastoviscoplastic model. Journal of Applied Mechanics, 2019, 86(2): 021001.
Huang J, Deng Y, Yi P, et al. Experimental and numerical investigation on thin sheet metal roll forming process of micro channels with high aspect ratio. The International Journal of Advanced Manufacturing Technology, 2019, 100(1-4): 117-129.
2018年及以前
Yi P, Deng Y, Shu Y, et al. Experimental studies on a novel roll-to-roll powder hot embossing for large-area fabrication of micropyramid arrays on polymers. Journal of Micromechanics and Microengineering, 2018, 28(8): 085007.
Deng Y J, Peng L F, Lai X M, et al. Constitutive modeling of size effect on deformation behaviors of amorphous polymers in micro-scaled deformation. International Journal of Plasticity, 2017, 89: 197-222.
Wang J, Yi P, Deng Y, et al. Recovery behavior of thermoplastic polymers in micro hot embossing process. Journal of Materials Processing Technology, 2017, 243: 205-216.
Wang J, Yi P, Deng Y, et al. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays: II. Numerical study. Journal of Micromechanics and Microengineering, 2015, 25(11): 115030.
Yi P, Shu Y, Deng Y, et al. Mechanism of forming defects in roll-to-roll hot embossing of micro-pyramid arrays I: experiments. Journal of Micromechanics and Microengineering, 2015, 25(10): 105017.
Deng Y, Yi P, Peng L, et al. Flow behavior of polymers during the roll-to-roll hot embossing process. Journal of Micromechanics and Microengineering, 2015, 25(6): 065004.
Deng Y, Yi P, Peng L, et al. Experimental investigation on the large-area fabrication of micro-pyramid arrays by roll-to-roll hot embossing on PVC film. Journal of Micromechanics and Microengineering, 2014, 24(4): 045023.
Peng L, Deng Y, Yi P, et al. Micro hot embossing of thermoplastic polymers: a review. Journal of Micromechanics and Microengineering, 2013, 24(1): 013001.

荣誉奖励 第八届上银优秀机械博士论文奖-铜奖，2018；
第五届上海市青少年科技创新市长奖，2013；
第十二届“挑战杯”大学生科技作品竞赛-全国特等奖，2011；
第十一届上海市青年联合会委员，2013-2018；
共青团上海市第十四次代表大会团员代表，2013。