外文题目: A Novel Method about Online Monitoring Surface Shape of Optical Elements in Continuous Polishing
作者: Yin Jin; Zhu Jianqiang; Jiao Xiang; Wu Yongzhong
刊名: Proc.SPIE
来源图书: ADVANCED OPTICAL MANUFACTURING TECHNOLOGIES
年: 2016 卷: 9683 文章编号：96831L
会议名称: 8th International Symposium on Advanced Optical Manufacturing and Testing Technologies - Advanced Optical Manufacturing Technologies
英文关键词:
continuous polishing; online monitor; surface shape
英文摘要:
In conventional continuous polishing process, the surface shape of work-piece was measured by an optical plane template after being placed in such environment with constant temperature for 1 to 2 hours. During this period, uncertain influence may occur on the polishing pad due to the change of system state. Meanwhile, the regular off-line testing may cause re-processing. In this paper, a new method about on-line monitoring surface shape of optical elements is proposed by the theory of run-sphere, and the change in curvature radius of the work-piece which lead to its radial tilt angle change. The change in work-piece surface shape indirectly obtain by the correction plate small angle with respect to the horizontal, and the angle were detected on line by the high-precision goniometer with the resolution 0.04 ''. According to theoretical calculations, the diameter of 200mm precision work-piece PV value up to 0.02 lambda (lambda = 632.8nm). The fused quartz glass was measured by above method. The test results showed that the surface accuracy and processing efficiency were significantly promoted, and also improving the controllability of surface shape of work-piece based on this method.


文献类型: 会议论文
正文语种: English
收录类别: ISTP
DOI: 10.1117/12.2242247


全文传递服务