个人简历：

郑玉贵，男，1965年生，1987、1990年于北京化工学院腐蚀与防护专业分别获得学士和硕士学位，1990年开始在中国科学院金属腐蚀与防护研究所工作，1995.10破格晋升为副研究员，1997.5-1998.5在加拿大University of Saskatchewan作访问学者，1998年取得材料学在职博士学位（师从柯伟院士、姚治铭研究员），1999.7破格晋升为研究员，2000.6 – 2000.11在韩国 (Korea Advanced Institute of Science and Technology)作博士后，2003.8 － 2003.10在美国Ohio University和Ohio State University作访问教授，历任课题组长、研究室主任、金属腐蚀与防护国家重点实验室副主任等职务。现任中国科学院金属研究所党委委员（2012-）、二级研究员（2013-）、博士生导师（2003-）、创新课题组组长（责任研究员）（1999-）、国家材料环境腐蚀野外科学观测研究平台理事（2013-），国家材料环境腐蚀综合研究中心试验指导部部长（2004-）、合肥工业大学（2006-）和四川理工学院（2013-）兼职教授、韩国腐蚀科学学会主办的Corrosion Science and Technology（ISSN 1598-6462）期刊编委（2002-）、英国主办的Tribology - Materials, Surfaces and Interfaces（ISSN 1751- 5831）期刊编委（2006-）、Bentham Science Publishers主办的The Open Corrosion Journal（ISSN 1876-5033）期刊编委（2008-）、《中国腐蚀与防护学报》期刊编委（2012-）、《腐蚀科学与防护技术》期刊编委（2004-）、科学出版社《材料腐蚀丛书》编委会编委（2009-）、美国ASTM G32振动空蚀测试标准修改工作组成员（2007-2011）、第12届亚太腐蚀控制会议特邀报告人和分会主席（2001），第16届国际腐蚀大会（16th ICC）冲刷腐蚀分会主席（2005）、核电站设备可靠性及失效分析国际研讨会分会主席（2011）、第二届NACE上海国际腐蚀年会分会主席（2011）、第三届NACE上海国际腐蚀年会分会主席（2012）、2011核电厂二回路管道壁厚管理研讨会特邀专家、第七届全国腐蚀大会多相流腐蚀与防护分会主席（2013）、入选辽宁省“百千万人才工程”百人层次（2009-）、中国水力发电工程学会水机磨蚀专业委员会委员（1999-2004）、中国腐蚀与防护学会青年工作委员会委员（2002-）、材料腐蚀与防护四川省重点实验室学术委员会主任（2011-）、中国机械工程学会失效分析分会失效分析专家（2006-2008）、船机修造工程交通行业重点实验室学术委员会委员（2012-）、辽宁省机械工程学会表面工程分会副理事长（2007-）、辽宁省腐蚀与防护学会常务理事（2009-）。主要研究方向为多相流条件下材料的腐蚀、冲蚀和空蚀机理与防护，完成国家自然科学基金青年、面上、重大项目三级课题和国际会议项目各一项，执行负责并完成国家自然科学基金重点项目一项，参加并完成重点项目一项，正负责国家自然科学基金重点项目一项，3次承担“973” 项目（二级或三级课题负责人）。曾承担过科技部环境腐蚀平台建设、中石油、中石化、中海油、国防科工委预研、金属腐蚀与防护国家重点实验室和厂矿等项目50余项。发表期刊论文130余篇（SCI 70+，通讯作者50+，包括Electrochimica Acta (IF 3.777)1篇和Corrosion Science(IF 3.615) 14篇，2008年荣获英国优秀期刊论文奖（2008 Highly Commended Award，Emerald Literati Network)。多次应邀为中石化、中石油、大亚湾和秦山核电站“腐蚀与防护培训班”授课。



主要期刊论文：

* 为通讯作者

1. Z.B. Zheng, Y.G. Zheng*, W.H. Sun, J.Q. Wang, Effect of applied potentials on passivation and erosion-corrosion of a Fe-based amorphous metallic coating under slurry impingement, Corrosion Science, in press, http://dx.doi.org/10.1016/j.corsci.2014.01.004.

2. S. Hong, Y.P. Wu, B. Wang, Y.G. Zheng, W.W. Gao, G..Y. Li. High-velocity oxygen-fuel spray parameter optimization of nanostructured WC-10Co-4Cr coatings and sliding wear behavior of the optimized coating. Materials and Design, 2014, 55:286-291.

3. B. Jiang, S.L.Jiang, A.L.Ma, Y.G. Zheng*, Erosion-corrosion behavior of electroless Ni-P coating on copper-nickel alloy in 3.5 wt.% sodium chloride solution, Journal of Materials Engineering and Performance, in press, DOI 10.1007/s11665-013-0763-0.

4. Q.N. Song, Y.G. Zheng*, D.R. Ni, and Z.Y. Ma，Corrosion and Cavitation Erosion Behaviors of Friction Stir Processed Ni-Al bronze: Effect of Processing Parameters and Position in the Stirred Zone, Corrosion in press, doi: http://dx.doi.org/10.5006/1070.

5. B. Jiang , S.L. Jiang, A.L. Ma , Y.G. Zheng, Effect of heat treatment on Erosion-corrosion behaviour of electroless Ni-P coatings in saline water, Materials and Manufacturing Processes, accepted.

6. H.X. Hu, C.B. Liu, H.Z. Hu, Y.G. Zheng, Three-dimensional numerical simulation of the flow around two cylinders at supercritical Reynolds number, Fluid Dynamics Research, 45 (2013) 055504.

7. S. Hong, Y.P. Wu, Y.G. Zheng, B. Wang, W.W. Gao, J.R. Lin. Microstructure and electrochemical properties of nanostructured WC-10Co-4Cr coating prepared by HVOF spraying. Surface & Coatings Technology, 235(2013)582-588.

8. Y. G. Zheng*, H. Z. Hu, Y. M. Zhang, H. X Hu, Failure analysis of a melt urea pump impeller, Tribology - Materials, Surfaces and Interfaces, in press, DOI:10.1179/**X13Y. **.

9. Q.N. Song, Y.G. Zheng*, S.L. Jiang, D.R. Ni, and Z.Y. Ma，Comparison of corrosion and cavitation erosion behaviors between the as-cast and friction-stir processed nickel aluminum bronze, Corrosion, 69(2013)1111-1121.

10. Y. Wang, S.L.Jiang, Y.G. Zheng^*, W. Ke, W.H. Sun, J.Q. Wang, Effect of molybdenum, manganese and tungsten contents on the corrosion behavior and hardness of iron-based metallic glasses, Materials and Corrosion, in press, DOI: 10.1002/maco.**.

11. Z.B. Zheng, Y.G. Zheng*, W.H. Sun, J.Q. Wang, Erosion-corrosion of HVOF-sprayed Fe-based amorphous metallic coating under impingement by a sand-containing NaCl solution, Corrosion Science, 76 (2013) 337–347.

12. Y. Wang, S.L.Jiang, Y.G. Zheng^*, W. Ke, W.H. Sun, W.L. Hou, X.C. Chang, J.Q. Wang, Effect of processing parameters on the microstructures and corrosion behavior of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings, Materials and Corrosion, 64(2013)801-810.

13. S.L. Jiang, Y.G. Zheng^*, D.L. Duan, Failure analysis of weld joints between the elbow and the straight pipes of a vacuum evaporator outlet, Engineering Failure Analysis, 27 (2013) 203–212.

14. Y. Wang, Y.G. Zheng^*, W. Ke, W.H. Sun, J.Q. Wang, Corrosion of high-velocity oxy-fuel (HVOF) sprayed iron-based amorphous metallic coatings for marine pump in sodium chloride solutions, Materials and Corrosion, 63(2012)685-694.

15. Y. Wang, S.L.Jiang, Y.G. Zheng^*, W. Ke, W.H. Sun, J.Q. Wang, Electrochemical behaviour of Fe-based metallic glasses in acidic and neutral solutions, Corrosion Science, 63 (2012) 159–173.

16. C.B. Liu, S.L. Jiang, Y.G. Zheng^*, Experimental and computational failure analysis of a valve in a nuclear power plant, Engineering Failure Analysis, 22 (2012) 1–10.

17. H.X. Hu, S.L. Jiang, Y.S. Tao, T.Y. Xiong,Y.G. Zheng*, Cavitation erosion and jet impingement erosion mechanism of cold sprayed Ni-Al₂O₃ coating, Nuclear Engineering and Design, 241 (2011) 4929–4937.

18. Y. Wang, S.L.Jiang, Y.G. Zheng^*, W.H. Sun, J.Q. Wang, Effect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings, Surface & Coatings Technology, 206 (2011) 1307–1318.

19. Y. Wang, Y.G. Zheng^*, W. Ke, W.H. Sun, W.L. Hou, X.C. Chang, J.Q. Wang, Slurry erosion-corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings for marine pump in sand-containing NaCl solutions, Corrosion Science, 53 (2011) 3177-3185.

20. P. C. Okafor, C. B. Liu, Y.J.Zhu, Y. G. Zheng^*, Corrosion and corrosion inhibition behaviour of N80 and P110 carbon steels in CO₂-saturated simulated formation water by rosin amide imidazoline, Industrial Engineering Chemistry Research, 50 (2011)7273-7281.

21. H.X. Hu, Y.G. Zheng^*, C.B. Liu, Predicting the preferential sites to liquid droplet erosion of the bellows assemblies by CFD, Nuclear Engineering and Design,241(2011)2295-2306.

22. H.X. Hu, Y.G. Zheng^*, Comparison of Inconel 625 and Inconel 600 in resistance to cavitation erosion and jet impingement erosion，Nuclear Engineering and Design, 240(2010) 2721-2730.

23. C.P. Qin, Y.G. Zheng^*, R. Wei, Cavitation erosion behavior of nanocomposite Ti-Si-C-N & Ti/Ti-Si-C-N coatings deposited on 2Cr13 stainless steel using a plasma enhanced magnetron sputtering process, Surface & Coatings Technology, 204 (2010) 3530–3538.

24. P. C. Okafor, C. B. Liu, X. Liu ,Y. G. Zheng^*, F. Wang, C.Y. Liu, F. Wang, Corrosion inhibition and adsorption behaviour of imidazoline salt on N80 carbon steel in CO₂-saturated solutions and its synergism with thiourea, Journal of Solid State Electrochemistry, 14(2010)1367–1376.

25. X.Q. Liu, Y.G. Zheng, X.C. Chang, W.L. Hou, J. Q. Wang．Influence of HVOF thermal spray process on the microstructures and properties of Fe-based amorphous / nano metallic coatings. Material Science Forum, 633-634 (2010) 685-694.

26. D.R. Ni, B.L. Xiao, Z.Y. Ma, Y.X. Qiao, Y.G. Zheng, Corrosion properties of friction–stir processed cast NiAl bronze,Corrosion Science, 52(2010) 1610-1617.

27. Hong Yu, Yugui Zheng^*, Zhiming Yao, Cavitation erosion corrosion behavior of manganese-nickel-aluminum bronze in comparison with manganese-brass，Journal of Material Science and Technology, 25 (2009): 758-766.

28. P. C. Okafor, C. B. Liu, X. Liu, Y. G. Zheng^*, Inhibition of CO₂ corrosion of N80 carbon steel by carboxylic quaternary imidazoline and halide ions additives, Journal of Applied Electrochemistry, 39(2009):2535–2543

29. X.Q. Liu, Y.G. Zheng, X.C. Chang, W.L. Hou, J.Q. Wang, Z. Tang, A. Burgess，Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying，Journal of Alloys and Compounds, 484 (2009) 300–307.

30. X. Liu , Y.G. Zheng^*, P. C. Okafor, Carbon dioxide corrosion inhibition of N80 carbon steel in single liquid phase and liquid/particle two-phase flow by hydroxyethyl imidazoline derivatives, Materials and Corrosion, 60(2009)507-513.

31. Y. X. Qiao, Y. G. Zheng^*, P. C. Okafor, W.Ke, Electrochemical behaviour of high nitrogen bearing stainless steel in acidic chloride solution: Effects of oxygen, acid concentration and surface roughness, Electrochimica Acta, 54 (2009) 2298-2304.

32. Y. X. Qiao, Y. G. Zheng^*, W.Ke, P.C.Okafor, Electrochemical behaviour of high nitrogen stainless steel in acidic solutions, Corrosion Science, 51 (2009) 979–986.

33. Peter C. Okafor and Y.G. Zheng, Synergistic inhibition behaviour of methylbenzyl quaternary imidazoline derivative and iodide ions on mild steel in H2SO4 solutions, Corrosion Science, 51 (2009) 850–859.

34. P. C. Okafor, X. Liu, Y. G. Zheng^*, Corrosion inhibition of mild steel by ethylamino imidazoline derivative in CO₂-saturated solution, Corrosion Science, 51 (2009) 761–768.

35. X. Liu , P. C. Okafor,Y.G. Zheng^*, The inhibition of CO₂ corrosion of N80 steel in single liquid phase and liquid/particle two-phase flow by aminoethyl imidazoline derivatives, Corrosion Science, 51 (2009) 744–751.

36. Y. G. Zheng*, S. Z. Luo, W. Ke, Cavitation erosion-corrosion behavior of CrMnB stainless overlay and 0Cr13Ni5Mo stainless steel in 0.5 M NaCl and 0.5 M HCl solutions, Tribology International, 41（2008）1181-1189.

37. Wei-fu Wang, Mao-cai Wang, Feng-jiu Sun, Yu-gui Zheng, Jian-min Jiao，Microstructure and cavitation erosion characteristics of Al–Si alloy coating prepared by electrospark deposition，Surface & Coatings Technology, 202(21):5116-5121(2008).

38. X. Liu , Y.G. Zheng^*,The effect of hydrophilic group on the inhibition behavior of imidazoline for CO₂ corrosion of N80 in 3%NaCl solution, Corrosion Engineering, Science & Technology，43(1): 87-92(2008).

39. Y. X. Qiao, Y. G. Zheng^*, X.Q. Wu, W. Ke, K. Yang, Z.H. Jiang, Cavitation erosion resistance of a high nitrogen stainless steel in comparison with a low N content CrMnN stainless steel, Tribology - Materials, Surfaces and Interfaces，1(3):165-172(2007).

40. Y. G. Zheng^*, H. Yu, S. L. Jiang, Z. M. Yao, Effect of the sea mud on erosion-corrosion behaviors of carbon steel and low alloy steel in 2.4% NaCl solution, Wear, 264(11-12):1051-1058(2008).

41. Yugui Zheng^*, Suzhen Luo, Wei Ke, Effect of passivity on electrochemical corrosion behavior of alloys during cavitation in aqueous solutions, Wear, 262(2007):1308-1314.

42. Ding-Rong Qu, Yu-Gui Zheng^*, Xiu Jiang, Wei Ke, Correlation between Corrosivity of Naphthenic Acids and Their Chemical Structures, Anti-Corrosion Methods and Materials, 54(4) (2007):211-218.

43. D. R. Qu, Y. G. Zheng, H. M. Jing, Z.M.Yao, W. Ke, High temperature naphthenic acid corrosion and sulphidic corrosion of Q235 and 5Cr1/2Mo in synthetic refining media, Corrosion Science, 48（2006）1960-1985.

44. Shengli Jiang, Yugui Zheng^*, Zhiming Yao,Cavitation erosion behaviour of 20SiMn low alloy steel in Na₂SO₄ and NaHCO₃ solutions, Corrosion Science, 48(2006)2614-2632.

45. X. Jiang, Y.G. Zheng^*, D.R.Qu, and W. Ke， Effect of calcium ions on pitting corrosion and inhibition performances for CO₂ corrosion of N80 steel, Corrosion Science, 48(2006)3091-3108.

46. Shengli Jiang, Yugui Zheng^*, Suzhen Luo, Zhiming Yao, The influence of applied potential on cavitation erosion behavior of type 316L stainless steel in sulfuric acid solution, Corrosion, 62(2):99-108.

47. X.Jiang, Y.G.Zheng^*, W.Ke, Corrosion inhibitor performances for carbon dioxide corrosion of N80 steel under static and flowing conditions, Corrosion, 61(4):326-334.

48. H. Yu, Y.G.Zheng^*，Z.M.Yao，The cavitation erosion and erosion-corrosion behavior of carbon steel in simulating solutions of three rivers of China, Materials and Corrosion, 57(2006)705-714.

49. D. R. Qu, Y. G. Zheng^*, H. M. Jing, X. Jiang, W. Ke, Erosion-corrosion of Q235 and 5Cr1/2Mo steels in oil with naphthenic acid and/or sulphur compound at high temperature, Materials and Corrosion, 56(2005)533-541.

50. X.Jiang, Y.G.Zheng^*, W.Ke, Effect of flow velocity and entrained sand on inhibition performances of two inhibitors for CO₂ corrosion of N80 steel in 3% NaCl solution, Corrosion Science, 47（2005）2636-2658.

51. X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, and W. Ke, Resistance of molybdenum-bearing stainless steels and molybdenum-bearing stainless steel coating to naphthenic acid corrosion and erosion-corrosion, Corrosion Science, 46:1013-1032(2004).

52. X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, and W. Ke, Erosion-corrosion of various oil-refining materials in naphthenic acid, Wear, 256(2004):133-144

53. X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, and W. Ke, Study on high-temperature naphthenic acid corrosion and erosion-corrosion of aluminized carbon steel, Journal of Materials Science, 39:975-985(2004).

54. W.Liu，Y.G.Zheng^*，C.S.Liu，Z.M.Yao, Cavitation erosion characteristics of a NiTi alloy, Metallurgical and Materials Transactions A，35A(1): 356-362(2004).

55. W.Liu，Y.G.Zheng^*，C.S.Liu，Z.M.Yao，W.Ke，Cavitation erosion behavior of Cr-Mn-N Steels with comparison to 0Cr13Ni5Mo steel，Wear, 254:713-722(2003).

56. Suzhen Luo, Yugui Zheng^*, Jin Li, Wei Ke, Effect of curing degree and fillers on slurry erosion behavior of fusion-bonded epoxy powder coatings, Wear, 254:292-297(2003).

57. Suzhen Luo，Yugui Zheng，Moucheng Li，Zhiming Yao，Wei Ke. Effect of cavitation on corrosion behavior of 20SiMn low alloy steel in 3%NaCl solution, Corrosion, 59(7):597-605(2003).

58. J.H.Kim, I.S.Kim and Y.G.Zheng, Flow-accelerated corrosion behavior of SA106 Gr.C weldment, Materials and Corrosion, 54:23-31(2003).

59. Suzhen Luo, Yugui Zheng^*, Wei Liu, Hemin Jing, Zhiming Yao, Wei Ke, Cavitation erosion behavior of CrMnN duplex stainless steel in distilled water and 3% NaCl solution, Journal of Material Science and Technology, 19(4):346-350(2003).

60. X. Q. Wu, H. M. Jing, Y. G. Zheng, Z.M.Yao, W. Ke, Corrosion and erosion-corrosion behaviors of carbon steel in naphthenic acid mediums, Materials and Corrosion, 53:833-844(2002).

61. Suzhen Luo, Yugui Zheng^*, Jin Li, Wei Ke, Slurry erosion resistance of fusion-bonded epoxy powder coating, Wear, 249:733-738(2001).

62. X. Q. Wu, H. M. Jing, Y. G. Zheng, W. Ke, Y. S. Yang, and Z. Q. Hu, Mechanical properties of the industrial HK40 reforming tubes produced by an improved centrifugal processing, Zeitschrift Für Metallkunde, 92(2):179-183 (2001).

63. X. Q. Wu, Y. G. Zheng, Z.M.Yao and W. Ke, Morphology and formation mechanism of the coke deposited on the inner wall of an industrial HP cracking tube, British Corrosion Journal, 36(2):121-126(2001).

64. X. Q. Wu, H. M. Jing, Y. G. Zheng, Z. M. Yao, W. Ke, and Z. Q. Hu, The eutectic carbides and creep rupture strength of 25Cr20Ni heat-resistant steel tubes centrifugally cast with different solidification conditions, Materials Science and Engineering，A293(2000):252-260.

65. Y.G. Zheng*, F. Yang, Z.M. Yao, W. Ke,, On the critical flow velocity of Cu-Ni alloy BFe30-1-1 in flowing artificial seawater, Zeitschrift Für Metallkunde, 91(4): 323-328(2000).

66. Xuewen Cheng, Zheng Zhang, Yugui Zheng, Wei Ke, Zhiming Yao, Numerical simulation of erosion-corrosion in liquid-solid two-phase flow, Journal of Chinese Chemical Engineering, 8(4):347-355(2000).

67. Yugui Zheng^*, Zhiming Yao, Wei Ke, Erosion-corrosion resistant alloy development in aggressive slurry, Materials Letters, 46(2000):362-368.

68. Yugui Zheng^*, Zhiming Yao, Xiangyun Wei, Wei Ke, The synergistic effect between erosion and corrosion in acidic slurry medium, Wear, 186-187 (1995) 555-561.

69. Zhiming Yao, Yugui Zheng, Wei Ke, The influence of applied potential on the erosion-corrosion behavior of AISI321 in acidic slurry medium, Wear, 186-187(1995) 568 -572.

70. J. Li, Y.G.Zheng, J.Q.Wang, Z.M.Yao, Z.F.Wang, W.Ke, Depassivation and repassivation of AISI321 stainless steel surface during solid particle impact in 10% H₂SO₄ solution, Wear, 186-187(1995) 562-567.