个人简介：
姓  名: 徐晓峰
性  别： 男
民  族：汉  族
出生年月：1986.05
籍  贯：黑龙江省桦川县
学  位：博士
专  业：材料加工工程
政治面貌：党员
联系地址: 吉林大学南岭校区东门铸造实验室209室
手  机：** 
Email：xuxiaofeng@jlu.edu.cn
教育背景：                                                                                      
2006.9-2010.7    　 吉林大学          材料成型及控制工程                   工学学士
2010.9-2015.12    吉林大学            材料加工工程                    直博，工学博士
工作经历：                                                                         
2016.1-至今       吉林大学            材料加工工程                              副教授
科研方向：                                                             
近年来一直围绕钢铁及轻合金强韧化设计开展了大量研究工作。主要从事钢铁、高强度铝、钛等合金的析出、强韧化和电致强化方面的研究工作。主持了国家自然科学基金（青年） “超高强、高韧α+β型钛合金的电致强化机理（**）”项目、长春兴昱机械制品有限公司 “锌铝合金模具新材料及其液态成型技术开发（20**169）”、东方蓝天钛金科技有限公司 “基于脉冲电流强韧化技术的航空航天用紧固件及材料定向改性设计技术与产业化（20**349）”等项目，参加了“全液压深部大陆科学钻探用钻机研制 (SinoProbe-09-05)－高强韧耐热铝合金钻杆新材料研发 (Nos. ) ”、吉林省财政厅“车用新材料及加工技术（SXGJSF2017-3）”、国家重点专项子项“先进工程材料中子无损测试分析-1 (2017YFA**) ”、国家自然基金“车身结构钢铝异种材料温热胶铆复合连接技术及服役失效研究(No.**) ”等研究工作。作为第一作者及通讯作者在国际知名学术期刊上发表论文20余篇。
学术成果                                                                                                                                                      
学术论文：
[1] Xiaofeng Xu, Yuguang Zhao*, Bingdong Ma, Jiatao Zhang, Ming Zhang, Rapid grain refinement of 2024 Al alloy through recrystallization induced by electropulsing, Materials Science and Engineering: A, 2014, 612: 223-226.
[2] Xiaofeng Xu, Yuguang Zhao*, Bingdong Ma, Ming Zhang, Rapid precipitation of T-phase in the 2024 aluminum alloy via cyclic electropulsing treatment, Journal of Alloys and Compounds, 2014, 610: 506-510.
[3] Xiaofeng Xu, Yuguang Zhao*, Bingdong Ma, Ming Zhang, Electropulsing induced evolution of grain-boundary precipitates without loss of strength in the 7075 Al alloy, Materials Characterization, 2015, 105: 90-94.
[4] Xiaofeng Xu, Yuguang Zhao*, Xudong Wang, Ming Zhang, Yuheng Ning, Effect of surplus-phase on the microstructure and mechanical properties in Al-Cu-Mg-Ag alloys with high Cu/Mg ratio, Journal of Materials Engineering and Performance, 2015, 24: 4322-4327.
[5] Xiaofeng Xu, Yuguang Zhao*, Xudong Wang, Yangyang Zhang, Yuheng Ning, The rapid age strengthening induced by Ag additions in 7075 aluminum alloy, Materials Science and Engineering A, 2015, 648: 367-370.
[6] Xiaofeng Xu, Yuguang Zhao*, Xudong Wang, Yangyang Zhang, Yuheng Ning, Effect of rapid solid-solution induced by electropulsing on the microstructure and mechanical properties in 7075 Al alloy, Materials Science and Engineering A, 2016, 654: 278-281.
[7] Yang Zhao, Yaowu Shi, Xuehui Yang , Xiaofeng Xu*, Rapid strengthening without loss of ductility via electropulsing treatment in Ti-6Al-4V alloy, Journal of Materials Engineering and Performance,2018, 27: 3636-3642.
[8] Wenqiang Jiang, Xiaofeng Xu*, Yuguang Zhao, Zhe Wang, Chao Wu, Dong Pan, Zhaoyuan Meng, Effect of the addition of Sr modifier in different conditions on microstructure and mechanical properties of T6 treated Al-Mg2Si in-situ composite, Materials Science and Engineering A, 2018, 721: 263-273.
[9] Yuguang Zhao, Xuehui Yang, Xiaofeng Xu* Yangyang Zhang, Yuheng Ning, Effects of Al-10Sr modifiers with different states, modification temperature and holding time on microstructure of ZL114A alloy, Journal of Jilin University (Engineering and Technology Edition), 2018, 48 (1): 212-220.
[10] Dan Yang, Yuheng Ning, Yuguang Zhao, Guobin Zhu, Xiaofeng Xu*, Influence of Processing Parameter on Microstructure, Wear-resistance and Corrosion-resistance of Laser Cladding Ni-based Alloy on the Surface of 304 Stainless Steel, Materials Review, 2017, 31(12): 133-140.
[11] Xinwei Cui, Xiaofeng Xu*, Yuheng Ning, Yuguang Zhao, Microstructure and Mechanical Properties of 7075 Al Alloy Processed by Combined Cold-rolling and T6 Heat-treatment, Materials Review, 2017, 31(7): 88-91.
[12] Bingdong Ma, Yuguang Zhao*, Hui Bai, Jun Ma, Jiatao Zhang, Xiaofeng Xu, Gradient distribution of mechanical properties in the high carbon steel induced by the detour effect of the pulse current, Materials and Design, 2013, 49: 168-172.
[13] Jiatao Zhang, Yuguang Zhao*, Xiaofeng Xu, Xiaobo Liu, Effect of ultrasonic on morphology of primary Mg2Si in in-situ Mg2Si/Al composite, Transactions of Nonferrous Metals Society of China, 2013, 23: 2852-2856.
[14] Jiatao Zhang, Yuguang Zhao*, Juan Tan, Xiaofeng Xu, Austenite Grain Refinement by Reverse α′→ γ Transformation in Metastable Austenitic Manganese Steel, Journal of Iron and Steel Research, International, 2015, 2: 157-162.
[15] Xiaofeng Xu, Yuguang Zhao*, Ming Zhang, Yuheng Ning, Xudong Wang, Effect of extrusion ratio on the microstructure and mechanical properties in an Al-Cu-Mg-Ag alloy, Journal of Wuhan University of Technology Materials Science Edition, 2018, 33 (3): 710-714.
[16] Dong Pan, Yuguang Zhao, Xiaofeng Xu*, Yitong Wang, Wenqiang Jiang, Hong Ju. Effect of High-Energy and Instantaneous Electropulsing Treatment on Microstructure and Properties, Acta Metallurgica Sinica, 2018, 54 (9): 1245-1252.
[17] Yu-guang Zhao, Zhe Wang, Xiao-feng Xu*, Ming-zhe Zhang, and Wen-qiang Jiang. A new preparation technology of structuralgradient materials without a brittle transition zone in a Mn-Si-Cr-B bainitic cast steel. China Foundry, 2018, 15 (4): 283-290.
[18] Yi-tong Wang, Yu-guang Zhao, Xiao-feng Xu*, Dong Pan, Wen-qiang Jiang, Xue-hui Yang, Zhe Wang. Superior mechanical properties induced by the interaction between dislocations and precipitates in the electro-pulsing treated Al-Mg-Si alloys. Materials Science and Engineering A, 2018, 735: 154-161.
[19] Xueying Chong, Wenqiang Jiang, Yuguang Zhao, Xiaofeng Xu*, Dong Pan, Yitong Wang, Zhe Wang. High Performance of T6-Treated Al–15Mg2Si–3Cu Composite Reinforced with Spherical Primary Mg2Si after the Co-Modification of Bi?+?Sr [J]. Adv Eng Mater, 0(0): **.
[20] Chao Wu, Yuguang Zhao, Xiaofeng Xu*, Penglu Yin, Xiaoming Qiu. Electropulse-induced laminated structures in a ferritic-pearlitic 35CrMo steel [J]. Scripta Materialia, 2019, 165(6-9).
[21] D. Pan, Y. Zhao*, X. Xu, Y. Wang, W. Jiang, X. Chong. A novel strengthening and toughening strategy for T250 maraging steel: Cluster-orientation governed higher strength-ductility combination induced by electropulsing [J]. Materials & Design, 2019, 169(107686).
[22] Y. Wang, Y. Zhao, X. Xu*, D. Pan, W. Jiang, X. Chong. Simultaneously Enhanced Strength and Ductility of Al(-)Mg(-)Si Alloys during Aging Process Induced by Electro-Pulsing Treatment [J]. Materials (Basel), 2019, 12(9): 1-18.
[23] D. Pan, Y. Zhao*, Y. Wang, X. Xu, P. Yin, X. Chong. Formation of ultrafine pearlites in tempered 42CrMo steel induced by electro-pulsing [J]. Mater Lett, 2019, 251(73-77).
[24] D. Pan, Y. Wang, Y. Zhao*, X. Xu, X. Chong, P. Yin. Completely wetted ɑ/ɑ grain boundaries in electro-pulsing treated DP600 steel under different cooling conditions [J]. Mater Lett, 2019, 252(264-267).
[25] C. Wu, X. Qiu, X. Xu*, P. Yin, Y. Zhao. A model for rapid austenitization in steel with ferrite and pearlite microstructure under electropulsing [J]. Materialia, 2019, 6(100343).
科研项目：
序号
项目名称及编号
项目来源
项目分工
项目进展情况

1
超高强、高韧α+β型钛合金的电致强化机理（No.**）
国家自然科学基金
主持
在研

2
锌铝合金模具新材料及其液态成型技术开发（20**169）
长春兴昱机械制品有限公司
主持
结题

4
车用新材料及加工技术（SXGJSF2017-3）
吉林省财政厅
主持
在研

5
先进工程材料中子无损测试分析-1 (2017YFA**)
 
国家重点专项课题子项
参加
在研

6
车身结构钢铝异种材料温热胶铆复合连接技术及服役失效研究(No.**)
国家自然科学基金
参加
在研

7
高强韧耐热铝合金钻杆新材料研发　（SinoProbe-09-05）
国土资源部
参加
结题