基本情况
姓名： 赵小辉

性别： 男
职称： 副教授
所在系别： 材料加工工程系
最高学历： 研究生
最高学位： 博士
电话：
Email：
详细情况
所在学科专业： 材料加工工程
所研究方向： 焊接结构的断裂与疲劳、表面纳米强化
讲授课程： 本科生课程：《焊接结构力学》及《焊接工艺及工装设计基础》
教育经历： 2003.9-2007.7 哈尔滨工业大学 材料成型及控制工程 本科
2007.9-2009.7 天津大学 材料加工工程 硕士（保送）
2009.9-2012.6 天津大学 材料加工工程 博士

工作经历： 2012.7至2014.9 吉林大学 材料加工工程系（焊接结构方向）讲师
2013.4-2016.4 吉林大学和郑州煤矿机械集团联合培养博士后，已出站
2014.9至今 吉林大学 材料加工工程系（焊接结构方向）副教授
2016.3至今 米兰理工大学 (Politecnico di Milano) 机械工程系 访问学者

科研项目： 1. 吉林大学青年教师重点培养项目，负责人，在研；
2. 焊趾打磨接头疲劳性能研究；横向课题：郑州煤矿机械集团股份有限公司，负责人，在研；
3. 超长寿命区间高速列车钢轨焊接接头的疲劳失效机理研究；国家自然科学基金青年基金项目， 负责人，在研；
4. 瞬时载荷和残余应力交互作用下的焊接接头疲劳性能评估；中国博士后基金面上一等资助项目，负责人，在研；
5. 超声冲击处理钛合金焊接接头高温疲劳性能研究；横向课题，负责人，在研；
6. 双周载荷作用下的焊接接头疲劳性能评估；汽车材料教育部重点实验室平台基地建设项目，负责
人，在研；
7. 等离子喷熔修形法提高焊接接头疲劳性能研究；青年教师创新基金项目，负责人，在研；
8. 高可靠性结构件疲劳寿命分析；郑州煤矿机械集团（博士后项目）；负责人，在研；
9. 基于超声表面滚压技术的轻质金属合金焊接接头超长寿命区间疲劳性能研究；省教育厅“十二五”科学技术研究规划项目，负责人，在研；
10. 轻质金属合金焊接接头超长寿命区间疲劳断裂机理研究；吉林省科技厅项目，负责人，在研；
11. 基于机械表面精密加工的航空发动机叶片焊接接头疲劳性能及材料表面改性研究；青年师生交叉学科培育项目，负责人，在研；
12. 2015年面上项目种子基金项目，在研；
13. 闪光焊钢轨焊接接头疲劳性能研究，负责人，在研；
学术论文： 论文及专利：
2017年SCI
1. Xiaohui Zhao, Guilian Xue, Yu Liu, Gradient crystalline structure induced by ultrasonic impacting and rolling and its effect on fatigue behavior of TC11 titanium alloy. Results in Physics. Accpt. 2017, https://doi.org/10.1016/j.rinp.2017.05.026.(SCI二区)
2016年SCI:
2. Y. Liu, Y.J. Zhang and X.H. Zhao (通讯作者),Nanostructure evolution of as-cast magnesium alloy induced by ultrasonic impacting and rolling.Micro-nano letters.Accept.2016.(SCI二区)
3. Xiaohui Zhao, Zhigang Peng, Yu Liu.Fatigue behavior of notched U75V-steel treated by bearing ultrasonic peening. Surface engineering.Accept.2016.(SCI二区)
4. Xiaohui Zhao, Ynjun Zhang, Yu Liu. Surface characteristics and fatigue behaviour of gradient nano-structured magnesium alloy.Metals.Accept.2016.(SCI二区)
5. Xiaohui Zhao, Chao Chen. Effect of the precipitated phase of MgZn2 on surface nanocrystallization of Al-Zn-Mg alloy based on high-frequency impacting and rolling. Material letters.Materials Letters 188(2017)95–98.(SCI二区)
6. Xiaohui Zhao, Mingyi Wang, Zhiqiang Zhang,Yu Liu.The effect of ultrasonic peening treatment on fatigue performance of welded joint.Materials.Accept.2016.(SCI二区)
7. Y. Liu1,G.L. Xue and X.H. Zhao (通讯作者),Strain-induced gradient crystalline evolution mechanism of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si during ultrasonic impacting and rolling process.Micro-nano letters.Accept.2016.(SCI二区)
2015年SCI：
8. Zhiqiang Zhang, Xiaohui Zhao(通讯作者). Investigation of heat transfer in hot stamping of boron steel. Metallurgical and Materials Transactions B, 2015.(SCI 三区)
9. Fan Yanjun, Zhao Xiaohui(通讯作者). Research on fatigue behavior of the flash welded joint enhanced by ultrasonic peening treatment. Materials and Design,2015.(SCI 二区)
10.Xiaohui Zhao, Fuyong Li, Yu Liu, Yanjun Fan. Research on fatigue behaviors of box-type welded structure of hydraulic support used in Coal mine. Materials 2015, 8, 6609–6622(SCI 二区)
11. Xiaohui Zhao, Yanjun Fan, Yu Liu. Revealing the surface nano-enhancing mechanism of -titanium alloy by microstructure evolution. Materials letters,160(2015)51–54.(SCI二区).
12.Xiaohui Zhao, Yanjun Fan, Yu Liu.Evaluation of fatigue fracture mechanism in a flash butt welding joint of a U75V type steel for railroad applications. Engineering Failure Analysis, 2015, 55:26-38.(SCI, 三区)
2014年SCI：
13. Xiaohui Zhao, Dongpo Wang. Determination of the plastic properties of materials treated by ultrasonic surface rolling process through instrumented indentation. Materials Science & Engineering A, 2014, 600: 21-31. (SCI, 二区)
14. Xiaohui Zhao, Dongpo Wang. Effective FE model to predict surface layer characteristics of ultrasonic surface rolling with experimental validation, Materials Science and Technology, 2014, 30: 627-636. (SCI, 四区)
15. Xiaohui Zhao, Dongpo Wang, Caiyan Deng. Research on fatigue behavior of welded joint spraying fused by low transformation temperature alloy powder. Materials & Design, 2014, 53: 490-496. (SCI, 二区)
16. Xiaohui Zhao, Yu Liu. Research on fatigue behavior of electron beam welding joint of 06Cr19Ni10 austenitic stainless steel sheet. Materials & Design, 2014, 57: 494-502. (SCI,二区)
17. Xiaohui Zhao, Yu Liu, Yong Liu, Yuan Gao. Research on fatigue behavior and residual stress of large-scale cruciform welding joint with groove. Materials & Design, 2014, 63: 593-599. (SCI, 二区)
2013年以前SCI：
18. Xiaohui Zhao, Dongpo Wang, Lixing Huo. Analysis of the S-N curves of welded joints enhanced by ultrasonic peeningtreatment. Materials & Design, 2011, 32: 88-96. (SCI, 二区)
19. Zhao Xiaohui, Wang Dongpo, Deng Caiyan, Liu Yu, Song Zongxian. The fatigue behaviors of butt welds ground flush in the super-long life regime. International Journal of Fatigue, 2012, 36:1- 8(SCI, 三区)
20. Xiaohui Zhao, Dongpo Wang, Caiyan Deng. Fatigue behavior of welded joint spray fused by nickel-base alloy powder. Journal of Materials Processing Technology, 2011, 211:2039-2044. (SCI,三区)
EI论文及专利：
20. Zhao Xiaohui, Improvement of Fatigue Performance of TC4 Ti-alloy Welded Joints by Loading Ultrasonic Peening, Transactions of the China Welding Institution, 2010.11 (EI检索)
21. Zhao Xiaohui, Finite Element Analysis of Residual Stress of Welded Joints Sprayed Fused, Transactions of the China Welding Institution, 2011.09 (EI检索)
22. Zhao Xiaohui, Research on coating of flame spray and properties of welded joints, Transactions of Tianjin University, 2012.03 (EI检索)
23. Zhao Xiaohui, Modification of plasma spurt spraying on improving fatigue property of welded joint, Applied Mechanics and Materials, 2014.04 (EI检索)
24. Zhao Xiaohui, Investigation on Dynamics of Ultrasonic Surface Rolling Process Advanced Materials Research, 2014.01 (EI检索)
25. Zhao Xiaohui, Mechanical properties of welded joint modified by plasma spurt Spraying, MSCE 2014, 2014.04 (EI检索)
26. Zhao Xiaohui, Energy distribution of ultrasonic surface rolling process, MSCE 2014,2014.04 (EI检索)
27. 赵小辉, 具有高疲劳寿命的新型十字焊接接头. 实用新型, 授权日：2014.9.24
28. 赵小辉，一种可自动调控静压力的超声表面滚压加工反馈系统. 发明专利。
社会兼职： Materials letter, International journal of materials research,International Journal of Fatigue,International Journal of Mechanical Sciences,Engineering failure analysis, Materials and design, Journal of Applied Mechanical Engineering.
治学格言： 充分的准备胜过聪明的头脑----踏踏实实做科研，诚诚肯肯做人！热情欢迎对焊接结构疲劳、断裂、表面强化及数值模拟感兴趣的研究生加入我的科研项目中来！