删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Investigation of Cast Copper Structure

本站小编 哈尔滨工业大学/2019-10-24

Investigation of Cast Copper Structure

R K Mysik, S V Brusnitsyn, A V Sulitsin

(Ural Federal University, Russia, Ekaterinburg)



Abstract:

In this paper, the results of exploration macrostructure and microstructure of continuous cast copper bars are shown. Quantitative parameters of copper cast bars depending on the speed of continuous casting are rated. It is fixed that independent of speed of casting the macrocrystalline columnar structure consisting of four zones is formed. By means of raster electron microscopy, the microstructure of cast copper is studied. It is determined that the accumulations of eutectic Cu-Cu2O in the form of lines and gas pores by size from 2 to 35 microns at the boundaries grain are observed. With the use of the transmission electron microscope, specific dislocation configuration on cast copper sub-boundary grains is determined. It indicates to high-temperature strain of cupper in the course of cast bar solidification. The important finding can be used for the design technology of copper continuous casting and plastic working of cast bars.

Key words:  copper  macrostructure  microstructure  electronic microscopy  hardness  cast bar  continuous casting  defects.

DOI:10.11916/j.issn.1005-9113.2014.05.018

Clc Number:TG29

Fund:


相关话题/Investigation Cast Copper Structure