删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Prediction on Deflection of Inflated Beam

本站小编 哈尔滨工业大学/2019-10-24

Prediction on Deflection of Inflated Beam

Hui-Feng Tan1, Zhen-Yong Du2, Chang-Guo Wang1

(1.Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China;2.Nanjing Resarch Institute of Electronic Technology, Nanjing 210013, China);1.Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China;2.Nanjing Resarch Institute of Electronic Technology, Nanjing 210013, China



Abstract:

The bending stiffness of the inflated beam is considered as a constant before wrinkles appear, and it decreases obviously as wrinkles propagate. The formula of the bending stiffness is obtained based on the membrane theory in this paper. Furthermore, the definition of dimensionless bending stiffness factor is presented; the relationship of bending stiffness factor and wrinkling factor is derived; the bending stiffness factor is simplified as different linear functions with wrinkling factor, and the simplified model of bending stiffness of inflated beam under bending is also obtained. The bending stiffness including expression of wrinkling factor is substituted into the deflection differential equation, and then the slope and deflection equation of the inflated beam is deduced by integrating the deflection differential equation. Finally, the load-deflection curve is obtained, which is compared with the experimental data in a previous paper. It has a good agreement with each other.

Key words:  membrane structure  inflated beam  bending stiffness  wrinkle  stiffness factor

DOI:10.11916/j.issn.1005-9113.2013.01.002

Clc Number:TU353

Fund:


相关话题/Prediction Deflection Inflated Beam