删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

Dynamic Recrystallization Prediction During Double Cup Extrusion by Cellular Automata Coupled with F

本站小编 哈尔滨工业大学/2019-10-24

Dynamic Recrystallization Prediction During Double Cup Extrusion by Cellular Automata Coupled with Finite Analysis Method

Meng-Han Wang, Wen-Hao Wang, Hai Yang, Jie Zhou

(School of Material Science and Engineering, Chongqing University, Chongqing 400044, China)



Abstract:

In order to investigate the microstructure evolution during a hot extrusion process, a cellular automata (CA) coupled with finite element method (FEM) was developed to numerically simulate the dynamic recrystallization (DRX). Firstly, the cellular automata model was modified by introducing thermomechanical parameters under the isothermal hot compression conditions. Then, the modified CA was verified by the experimental average grain size which was obtained by the hot compression of cylindrical specimens. After that, the modified CA was used to predict the microstructure evolution during a double cup extrusion by combining with the finite element method. The results showed that the strain rate and the temperature are sensitive to the average grain size while the strain can affect the DRX fraction greatly. In addition, the CA model can predict the final microstructure successfully and is able to simulate the DRX phenomenon for a wide range of deformation conditions. It also revealed that the results obtained by CA model are consistent with the ones acquired by finite element analysis.

Key words:  cellular automata  computer simulation  dynamic recrystallization  microstructure

DOI:10.11916/j.issn.1005-9113.2013.04.016

Clc Number:TG146.2

Fund:


相关话题/Dynamic Recrystallization Prediction During Double