基本信息科学研究教育教学专著教材研究成果其他
基本信息


邵文柱




男，汉族，1968年生。哈尔滨工业大学材料学院材料科学系教授，博士生导师。

长期从事材料设计、制备与表征的研究，主要研究方向为金属材料组织性能表征与调控、导电金属陶瓷组织性能调控及其损伤行为，以及极端环境下材料的损伤行为及其微观机制。

完成国防973、国家863、国家自然科学基金、国家预先研究项目等省部级项目十余项，获省部级自然科学奖一项、科技进步奖一项；请专利15项，获得授权专利10项；出版专著2部，参与编写专著2部。发表论文196篇，其中SCI收录124篇，SCI引用2113次，其中SCI他引1974次，H因子26。




荣誉称号
2001年 获哈尔滨工业大学 大田奖教金

2003年 获哈尔滨工业大学三育人先进个人称号

2003年 获哈尔滨工业大学三育人先进个人荣誉称号

2008年 获哈尔滨工业大学优秀党务工作者荣誉称号

2018年 获哈尔滨工业大学研究生精品课奖励

工作经历
时间工作经历
1993.03-1995.07哈尔滨工业大学 金属材料及工艺系 金属材料及热处理教研室 助教
1995.03-2001.07哈尔滨工业大学 金属材料及工艺系 金属材料及热处理教研室 讲师
2001.07-2007.09哈尔滨工业大学 材料科学与工程学院 材料科学系 副教授
2007.09-哈尔滨工业大学 材料科学与工程学院 材料科学系 教授
2008.04-哈尔滨工业大学 材料科学与工程学院 材料科学系 博士生导师


教育经历
1986.09-1990.07 哈尔滨工业大学 金属材料及工艺系 金属材料及热处理专业 本科生1990.09-1993.03 哈尔滨工业大学 金属材料及工艺系 金属材料及热处理专业 硕士研究生 1996.03-1999.09 哈尔滨工业大学 材料科学与工程学院 材料学学科 博士研究生


主要任职
黑龙江省金属学会 理事

黑龙江省 金属材料专业委员会 主任

中国机械工程学会材料分会 会员

中国机械工程学会失效分析专家

《电工材料》杂志第四届 编委



American Chemical Society 刊物审稿人

科研项目

项目名称**TCO/Cu界面的润湿性及其对铜基电触头材料致密化及性能的影响

项目来源国家自然科学基金

开始时间2014-01-01

结束时间2017-12-01

项目经费80万元

担任角色负责
项目类别横向项目
项目状态完成


项目名称CU01-08 空间环境因素对材料机械物理性能影响地面模拟研究

项目来源中国-乌克兰政府间科技合作项目

开始时间2013-01-01

结束时间2014-12-01

担任角色参与
项目类别横向项目
项目状态完成


项目名称**空间辐照环境下软磁合金性能及精细结构演变的同步辐射研究

项目来源国家自然科学基金

开始时间2011-01-01

结束时间2013-12-01

项目经费44万元

担任角色参与
项目类别横向项目
项目状态完成


科研奖励

奖项名称2012金属结构材料的组织性能调控

获奖时间2011

完成人甄良，邵文柱，王岩，姜建堂，徐成彦

所获奖项黑龙江省自然科学一等奖



研究领域
金属材料组织性能的表征与调控

目前，金属材料在航空、航天、国防及国民经济各个高技术领域仍然是需求量最大的材料。随着航空和航天事业的发展，以及新材料的不断涌现，对铝合金、钛合金及高温合金等传统材料提出了更高的要求。对于这些材料的研究，目前已经从组织性能的定性表征和成分工艺的试验设计，逐步走向材料制备加工和服役过程模拟计算设计和组织结构的定量表征。这种转变一方面可以减少试验研究的周期，实现快速制造，同时可以真正与先进制造技术相结合，实现数字化制造。

在金属材料组织性能定量表征研究方向上主要针对的材料体系为铝合金和高温合金，主要研究内容包括：

（1）材料在多场作用下微观组织和性能演化规律的定量表征；

（2）材料微观组织和性能的之间定量关系的建立；

（3）材料微观组织和性能演化物理模型和数学模型建立；

（4）材料组织与性能的调控。

上述研究内容涉及到物理学、力学、计算机和数学等各领域的基本基础知识和先进分析测试方法。同时，本研究方向属于材料基础研究。通过试验研究和模拟计算，本研究将获得上述材料体系最基本的热力学、动力学数据，以及各种外场参数作用下材料参数的变化规律，这将为材料设计和工艺设计奠定良好的理论基础。另外，组织和性能之间定量关系的建立，将对工艺设计和优化起到直接的指导作用。因此，本研究方向既具有理论意义，又具有工程价值。

导体/绝缘体金属陶瓷的设计、制备及应用

导体/绝缘体金属陶瓷是导电金属或合金与一种或几种陶瓷相构成的多相复合体，它会使原始组元材料的某些特性增强，或者产生原始组元所不具备的综合性能。以金属相为基体时，所添加的陶瓷相在不会明显降低基体导电特性的前提下，起到骨架支撑和弥散强化效果，例如，新型电接触材料。以陶瓷相为基体时，如果金属相含量低于逾渗门槛值，通过金属相颗粒尺寸的调整可以实现材料介电特性的调控，例如存储器材料；如果金属相含量超过逾渗门槛值，材料具有金属导电性，可用于高温导电环境。因此，通过成分和组织调控，可以在较宽范围内调整金属陶瓷性能，从而设计和制备出可满足不同服役环境需求的先进材料。导电金属陶瓷的在国民经济和国防技术领域应用日益广泛，其中最具有代表性的是低压电器行业用电接触材料、航天领域高温导电部件、电解铝惰性阳极材料以及超高温热电偶材料等。

导体/绝缘体金属陶瓷材料属于非均质材料，其组织和性能的对应关系需借助逾渗理论和分形方法来表征。逾渗理论和分形方法在天文、地理、艺术和自然科学领域都有广泛的应用，但在材料学中的应用才刚刚开始起步，且其本身也需要进一步完善。因此，导体/绝缘体金属陶瓷基本组织和性能的表征，既可以促进逾渗理论本身的发展，也会丰富分形方法的实践。

导体/绝缘体金属陶瓷材料制备普遍采用粉末冶金方法，属于快速近净成形的先进制造方法之一。因此，导电金属陶瓷成分优化和致密化工艺研究，将为粉末冶金技术的发展提供丰富的数据。

目前在该研究方向上所研究的材料体系主要包括：电解铝惰性阳极用Cu/Cu₂O金属陶瓷材料、低压电器用铜基电接触材料及无氧陶瓷基超高温热电偶材料等。对于这些材料体系主要设置以下研究子方向：

（1）导电金属陶瓷成分优化和致密化工艺研究；

（2）导电金属陶瓷微观组织分形表征方法研究；

（3）导电金属陶瓷逾渗行为及机理研究。

极端环境下材料损伤行为及机理研究

太空已经成为继陆地、海洋、天空之后的人类新的开发领域，而且是未来人类最重要的新技术领域。空间环境对卫星材料提出了更高的要求。因此，必须对极端环境下材料的毁伤行为进行深入研究，从而为卫星的设计、加固和毁伤评估奠定理论基础，同时也将为新型航天器的研制提供参考。

根据试验条件，目前本研究方向的所涉及的极端环境因素主要包括：γ－射线、质子、中子、电子、激光及高速里子撞击等。具体研究内容包括：

（1）辐照环境下损伤效应及防护机理研究；

（2）辐照环境下损伤效应的计算机模拟技术研究；

（3）高速粒子撞击条件下材料种损伤行为行为。

团队成员
xxx: xxx, 研究方向: xxxxxxx.
xxx: xxx, 研究方向: xxxxxxx.

讲授课程


金属强度与断裂的微观理论（研究生主干课）简介:本课程在系统学习位错的相关理论的基础上，全面论述金属强度与断裂的物理本质、强化的基本途径及机制；详细分析位错理论中典型问题处理时建立物理模型和数学模型的思路，达到使学生能够深入理解位错理论，掌握金属材料强化的基本途径及机制，并在建立模型能力方面有所提高的目的。

材料与构件失效分析（本科生选修课）简介:本课程是一门综合性的技术学科，涉及材料科学、力学、摩擦学和机械制造工艺学等各方面的知识。本课程的教学目的是使学生在较为精通材料科学的基础上，综合掌握其它学科的基本知识，学会失效分析的基本思路和方法，掌握失效及失效分析的概念，机械产品失效的分类，失效分析的工作内容，失效分析与其它学科，技术之间的关系；开阔学生的思路，综合运用所学过的知识，解决实际工程中失效问题；掌握失效分析的基本技能，失效形式的判断。本课程共分为四章，第一章 失效分析的概念，第二章 失效分析的基础知识，第三章 失效分析的思路及方法，第四章 实际构件失效分析实例。总学数为20学时，其中讲授20学时，实验0学时。

招生信息
暂无填写


出版物

出版物名称晶体材料强度与断裂微观理论

作者甄良，邵文柱，杨德庄

出版时间,完成时间2018年1月

出版社科学出版社

简单介绍本书阐述位错理论的基本概念，探讨各种强化与断裂机制的微观力学本质，为从分发挥晶体材料的性能潜力提供理论基础。全书内容分为三部分，第一部分的两章阐述连续弹性介质和实际晶体中的位错行为，第二部分的四章阐述不同强化机制，第三部分阐述晶体材料裂纹萌生、扩展及韧脆转变的位错机制。本书适合于材料科学与工程一级学科材料学及材料加工研究方向研究生使用，也可供从事晶体结构材料研究方向的工程技术人员参考。


出版物名称ФИЗИКО-ХИМИЯПОРОШКОВЫХ,МЕДЬСОДЕРЖАЩИХЭЛЕКТРОКОНТАКТНЫХКОМПОЗИТОВ（铜基电接触材料物理化学）

作者В. В. Иванов, Шао Венжу（伏. 伏. 伊万诺夫，邵文柱）

出版时间,完成时间2018年2月

出版社LAP LAMBERT Academic Publishing

简单介绍Рассмотрены принципы создания, получения и исследования композиционных материалов для разрывных электрических контактов, преимущественно на медной основе. Обоснованы единые физико-химические и технологические подходы к формированию однородной микроструктуры, обеспечению высокого уровня служебных характеристик материалов. Изложены экспериментальные результаты изучения физических и служебных свойств материалов, технологических исследований, лабораторных и производственных испытаний готовых изделий, новые материаловедческие и технологические решения. Книга предназначена для специалистов промышленных предприятий и научных работников, занятых проблемами совершенствования электрических контактов, студентов и аспирантов, изучающих материаловедение и технологию композиционных материалов.本书以铜基电触头材料为主要研究对象，系统分析了电触头材料设计、制备和研发的基本原则；全面论证了实现材料组织均匀化及保障其具有高水平服役特性的物理化学途径和常用工艺方法；详细阐述触头材料物理机械特性研究结果，触头元件的实验室及中试生产工艺优化，以及新型铜基电触头材料及其制备工艺开发。本书适合于从事电接触材料工艺设计和开发的技术人员及科研工作者作为参考书，也适合于材料科学与工程一级学科及电工材料研究方向的研究生作为教材使用。


出版物名称Percolation in disordered conductor/insulator composites, in Advanced Composite Materials: Properties and Applications

作者N.Xie, W.Z. Shao and L. Zhen

出版时间,完成时间2017年

出版社Ehsan Bafekrpour

简单介绍N.Xie, W.Z. Shao and L. Zhen, Percolation in disordered conductor/insulator composites, in Advanced Composite Materials: Properties and Applications, editor by Ehsan Bafekrpour, De Gruyter Open, 2017

金属陶瓷方向


英文文章——

Li, W.J., Shao, W.Z., Xie, N., Zhang, L., Li, Y.R., Yang, M.S., Chen, B.A., Zhang, Q., Wang, Q., Zhen, L., Air arc erosion behavior of CuZr/Zn₂SnO₄ electrical contact materials, Journal of Alloys and Compounds2018, 743: 697-706

Qin, J.K., Ren, D.D., Shao, W.Z., Li, Y., Sun, Z.Y., Hu, P.A., Zhen, L., Xu, C.Y., Photoresponseenhancement in monolayer ReS₂phototransistor decorated with CdSe-CdS-ZnS quantum dots, ACS Applied Materials & Interfaces2017, 9: 39456-39463

Qin, J.K., Shao, W.Z., Xu, C.Y., Li, Y., Ren, D.D., Song, X.G., Zhen, L.,Chemical vapor deposition growth of degenerate p-type Mo-doped ReS₂films and theirhomojunction, ACS Applied Materials& Interfaces2017, 9: 15583-15591

Qin, J.K., Shao, W.Z., Li, Y., Xu, C.Y., Ren, D.D., Song, X.G., Zhen, L., van der Waals epitaxy of large-area continuous ReS₂ films on mica substrate, RSC Advances 2017, 7: 24188-24194

Feng, L.C., Xie, N., Shao, W.Z., Lu, L.X., Zhen, L., Zhao, J., Thermal conductivity determination of conductor/insulator composites by fractal: Geometrical tortuosity and percolation, Composites Part B: Engineering 2016, 92: 377-383

Feng, L.C., Xie, N., Shao, W.Z., Zhen, L., Ivanov, V.V.,Exploring Cu/Cu₂O cermet as a partially inert anode to produce aluminum in a sustainable way, Journal of Alloys and Compounds 2014, 610: 214-223

Wang, W.S., Zhen, L., Shao, W.Z., Chen, Z.L.,Sodium chloride induce formation of square-shaped cadmium molybdate nanoplates, Materials Letters 2014, 131: 292-294

Wang, W.S., Zhen, L., Xu, C.Y., Yang, L., Shao, W.Z., Chen, Z.L., Aqueous solution synthesis and photoluminescence properties of two-dimensional dendritic PbWO₄ nanostructures, Materials Research Bulletin2014, 56: 1-7(Cover Article)

Feng, L.C., Xie, N., Shao, W.Z., Lv, L.X., Zhong, J., Zhen, L.,Mechanical properties of cermet composites with various geometrical tortuosity of metal phase: fractal characterization, Materials Science and Engineering A 2014, 607: 236-244

Wang, W.S., Cui, J.X., Wang, P.P., Zhen, L., Shao, W.Z., Chen, Z.L., Self-supported construction of 3D CdMoO₄ hierarchical structures from nanoplates with enhanced photocatalytic properties, RSC Advances 2014, 4: 38527-38534

Wang, W.S., Zhen, L., Shao, W.Z., Chen, Z.L., Controlled synthesis and formation mechanism of calcium molybdate notched microspheres, CrystEngComm 2014, 26: 2598-2604(Inside Front Cover)

Fu, L.S., Jiang, J.T., Zhen, L., Shao, W.Z., FeNi₃/indium tin oxide (ITO) composite nanoparticles with excellent microwave absorption performance and low infrared emissivity,Materials Science and Engineering B2013, 178: 225-230

Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Chen, Z.L., Formation of CdMoO4 porous hollow nanospheres via a self-assembly accompanied with Ostwald ripening process and their photocatalytic performance, CrystEngComm 2013, 15: 8014-8021

Xie, N., Shao, W.Z., Feng, L.C., Lv, L.X., Zhen, L., Fractal analysis of disordered conductor-insulator composites with different conductor backbone structures near percolation threshold, The Journal of Physical Chemistry C 2012, 116: 19517-19525

Jiang, J.T., Zhen, L., Shao, W.Z., Zhou, Z.X., Effect of microstructure on the electromagnetic properties of Al18B4O33w/Co and Al18B4O33w/FeCo composite particles, Journal of Applied Physics 2012, 112: 051537

Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Chen, Z.L., Eu3+ doped CdMoO4 red phosphor synthesized through an aqueous solution route at room temperature, Journal of Alloys and Compounds 2012, 529: 17-20

Cui, J.X., Wang, W.S., Zhen, L., Shao, W.Z., Chen, Z.L., Formation of FeMoO4 hollow microspheres via chemical conversion induced Ostwald ripening process, CrystEngComm 2012, 14: 6827-6832

Xu, Y.Z., Zou, D.L., Xu, C.Y., Shao, W.Z., Chen, J.F., Zhen, L., Microstructures and phase transformation in Al2O3 ceramic fragments under hypervelocity impact, Asian Pacific Conference on Fracture and Strength - Mechanics and Materials 2012 (APCFS-MM), May 13 – 16, 2012, BEXCO/Haeundae Centum Hotel, Busan, Korea

Yan, S.J., Zhen, L., Xu, C.Y., Jiang, J.T., Shao, W.Z., Lu, L., Tang, J., The influence of Fe content on the magnetic and electromagnetic characteristics for Fex(CoNi)1-x ternary alloy nanoparticles, Journal of Applied Physics 2011, 109: 07A320

Zhen, L., Gong, Y.X., Jiang, J.T., Xu, C.Y., Shao, W.Z., Liu, P., Tang, J., Synthesis of CoFe/Al2O3 composite nanoparticles as the impedance matching layer of wideband multilayer absorber, Journal of Applied Physics 2011, 109: 07A332

Yan, S.J., Zhen, L., Xu, C.Y., Jiang, J.T., Shao, W.Z., Tang, J.K., Synthesis, characterization and electromagnetic properties of Fe1-xCox alloy flower-like microparticles, Journal of Magnetism and Magnetic Materials 2011, 323: 515-520

Gong, Y.X., Zhen, L., Jiang, J.T., Xu, C.Y., Wang, W.S., Shao, W.Z., Synthesis of Fe/ferrite composite nanotubes with excellent microwave absorption performance, CrystEngComm 2011, 13: 6839-6844

Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Synthesis and formation process of SrSO4 sisal-like hierarchical structures at room temperature, CrystEngComm 2011, 13: 620-625

Feng, L.C., Xie, N., Shao, W.Z., Cui, Y.S., Zhen, L., A novel ceramic thermocouple used in high-temperature measurement, Advanced Materials Research 2011, 197-198: 328-332

Gong, Y.X., Mittra, R., Zhen, L., Yu, W.H., Jiang, J.T., Shao, W.Z., Edge treatment for sidelobe reduction of parabolic reflector antenna with a two-layer absorber, 2011 IEEE International Symposium on Antenna and Propagations and USNC/URSI National Radio Science Meeting, July 3-8, 2011, Washington, DC, USA, pp 2184-2186

Yan, S.J., Zhen, L., Xu, C.Y., Jiang, J.T., Shao, W.Z., Microwave absorption properties of FeNi3 submicrometer spheres and SiO2@FeNi3 core-shell structures, Journal of Physics D: Applied Physics 2010, 43: **

Zhan, Z.Y., Xu, C.Y., Zhen, L., Wang, W.S., Shao, W.Z., Large-scale synthesis of single-crystalline KNb3O8 nanobelts via a simple molten salt method, Ceramics International 2010, 36: 679-682

Wei, X.J., Jiang, J.T., Zhen, L., Gong, Y.X., Shao, W.Z., Xu, C.Y., Synthesis and electromagnetic properties of Fe/SiO2 composite particles, Materials Letters 2010, 64: 57-60

Yan, S.J., Zhen, L., Xu, C.Y., Jiang, J.T., Shao, W.Z., The electromagnetic wave absorption properties of FeNi3 nanospheres and FeNi3@C nanocapsules, 2010 IEEE International Symposium on Antenna and Propagations and CNS/USNC/URSI Radio Science Meeting, July 11-17, 2010, Toronto, Ontario, Canada (Article No. **)

Jiang, J.T., Zhen, L., Shao, W.Z., Effect of microstructure on electromagnetic properties of ferromagnetic/dielectric composite particles, 2010 IEEE International Symposium on Antenna and Propagations and CNS/USNC/URSI Radio Science Meeting, July 11-17, 2010, Toronto, Ontario, Canada (Article No. **)

Gong, Y.X., Mittra, R., Zhen, L., Shao, W.Z., Design of a two-layer ultra-wideband microwave absorber, 2010 IEEE International Symposium on Antenna and Propagations and CNS/USNC/URSI Radio Science Meeting, July 11-17, 2010, Toronto, Ontario, Canada (Article No. **)

Gong, Y.X., Zhen, L., Jiang, J.T., Xu, C.Y., Shao, W.Z., Preparation of CoFe alloy nanoparticles with tunable electromagnetic wave absorption performance, Journal of Magnetism and Magnetic Materials 2009, 321: 3702-3705

Gong, Y.X., Zhen, L., Jiang, J.T., Xu, C.Y., Shao, W.Z., Synthesis and electromagnetic properties of CoFe alloy nano-flakes prepared with hydrogen-thermal reduction method, Journal of Applied Physics 2009, 106: 064302

Shao, W.Z., Feng, L.C., Zhen, L., Xie, N., Thermal expansion behavior of Cu/Cu2O cermets with different Cu structures, Ceramics International 2009, 35: 2803-2807

Jiang, J.T., Zhen, L., Yang, L., Shao, W.Z., Xu, C.Y., Chao, Z.M., Microstructure and electromagnetic properties of Al18B4O33w/Co composite prepared by electroless plating method, Surface and Coatings Technology 2009, 203: 2221-2228

Zhen, L., Jiang, J.T., Gao, R.S., Xu, C.Y., Shao, W.Z., Microstructure evolution and electromagnetic properties improvement of the Al18B4O33w/Co composite particles through heat-treatment, Journal of Magnetism and Magnetic Materials 2009, 321: 1290-1294

Jiang, J.T., Zhen, L., Wei, X.J., Gong, Y.X., Shao, W.Z., Xu, C.Y., He, K., Permeability calculation in composite media with low filler concentration: A new method of effective media theory application, Journal of Applied Physics 2009, 105: 07A526

Wang, W.S., Zhen, L., Xu, C.Y., Chen, J.Z., Shao, W.Z., Aqueous solution synthesis of CaF2 hollow microspheres via Ostwald ripening process at room temperature, ACS Applied Materials & Interfaces 2009, 1: 780-788

Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Room temperature synthesis, growth mechanism, photocatalytic and photoluminescence properties of cadmium molybdate core-shell microspheres, Crystal Growth & Design 2009, 9: 1558-1568

Wang, W.S., Zhen, L., Xu, C.Y., Yang, L., Shao, W.Z., Controlled synthesis of calcium tungstate hollow microspheres via Ostwald ripening and their photoluminescence property, The Journal of Physical Chemistry C 2008, 112: 19390-19398

Jiang, J.T., Zhen, L., Zhang, B.Y., Shao, W.Z., Xu, C.Y., Improvement on electromagnetic absorbing performance of Al18B4O33w/Co composite particles through heat-treatment, Scripta Materialia 2008, 59: 967-970

Zhen, L., He, K., Xu, C.Y., Shao, W.Z., Synthesis and characterization of single-crystalline MnFe2O4 nanorods via a surfactant-free hydrothermal route, Journal of Magnetism and Magnetic Materials 2008, 320: 2672-2675

Shao, W.Z., Xie, N., Zhen, L., Feng, L.C., Conductivity critical exponents lower than universal value in continuum percolation systems, Journal of Physics: Condensed Matter 2008, 20: 395235

Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Aqueous solution synthesis of Cd(OH)2 hollow microspheres via Ostwald ripening and their conversion to CdO hollow micropheres, The Journal of Physical Chemistry C 2008, 112: 14360-14366

Zhen, L., Gong, Y.X., Shao, W.Z., Jiang, J.T., Electromagnetic properties of FeNi alloy nanoparticles synthesized by hydrogen-thermal reduction method, Journal of Applied Physics 2008, 104: 034312

Feng, L.C., Shao, W.Z., Zhen, L., Xie, N., Microstructure and mechanical property of Cu2O-Cu cermet prepared by volume reduction-hot pressing method, Materials Letters 2008, 62: 3121-3123

Wang, W.S., Zhen, L., Xu, C.Y., Yang, L., Shao, W.Z., Room temperature synthesis of hierarchical SrCO3 architectures by a surfactant-free aqueous solution route, Crystal Growth & Design 2008, 8: 1734-1740

Zhen, L., Wang, W.S., Xu, C.Y., Shao, W.Z., Qin, L.-C., A facile hydrothermal route to the large-scale synthesis of CoWO4 nanorods, Materials Letters 2008, 62: 1740-1742

Wang, W.S., Zhen, L., Xu, C.Y., Zhang, B.Y., Shao, W.Z., Environment-friendly aqueous solution synthesis of hierarchical CaWO4 microspheres at room temperature, Journal of Nanoscience and Nanotechnology 2008, 8: 1288-1294

Zhen, L., Wang, W.S., Xu, C.Y., Shao, W.Z., Ye, M.M., Chen, Z.L., High photocatalytic activity and photoluminescence property of hollow CdMoO4 microspheres, Scripta Materialia 2008, 58: 461-464

Xu, C.Y., Zhen, L., Yang, L., He, K., Shao, W.Z., Qin, L.-C., A facile molten salt route to K2Nb8O21 nanoribbons, Ceramics International 2008, 34: 435-437

He, K., Xu, C.Y., Zhen, L., Shao, W.Z., Fractal growth of single-crystal α-Fe2O3: From dendritic micro-pines to hexagonal micro-snowflakes, Materials Letters 2008, 62: 739-742

Wang, W.S., Xu, C.Y., Zhen, L., Shao, W.Z., Yang, L., Room temperature synthesis of BaCrO4 nanoplates through a NaCl-assisted aqueous solution method, Materials Letters 2007, 61: 3146-3149

He, K., Xu, C.Y., Zhen, L., Shao, W.Z., Hydrothermal synthesis and characterization of single-crystalline Fe3O4 nanowires with high aspect ratio and uniformity, Materials Letters 2007, 61: 3159-3162

Zhen, L., Jiang, J.T., Shao, W.Z., Xu, C.Y., Resonance-antiresonance electromagnetic behavior in a disordered dielectric composite, Applied Physics Letters 2007, 90: 142907

Jiang, J.T., Zhen, L., Xu, C.Y., Shao, W.Z., Microstructure evolution of cobalt cobalt coating electroless plated on SiC whisker during electroless plating and heat treatment, Surface and Coatings Technology 2007, 201: 6059-6062

Wang, W.S., Xu, C.Y., Zhen, L., Shao, W.Z., Single-crystalline PbCrO4 nanorods: Room-temperature, surfactant-free synthesis, characterization, and optical properties, Journal of Crystal Growth 2007, 299: 86-93

Feng, L.C., Shao, W.Z., Zhen, L., Xie, N., Ivanov, V.V., Cu2O-Cu cermet as a candidate inert anode material for Al production, International Journal of Applied Ceramic Technology 2007, 4: 453-462

Cui, Y.S., Zhen, L., Wang, Y., Shao, W.Z., Ivanov, V.V., The contact resistance and arc erosion behavior of separable CP-Nb-Cr/Cu-Cd electrical contact material, Key Engineering Materials 2007, 353-358: 886-889

Feng, L.C., Zhen, L., Shao, W.Z., Xie, N., Study of a ceramic thermocouple for Al production, Materials Science Forum 2007, 546-549: 2195-2198

Wang, W.S., Zhen, L., Xu, C.Y., Zhang, B.Y., Shao, W.Z., Room temperature synthesis of hollow CdMoO4 microspheres by a surfactant-free aqueous solution route, The Journal of Physical Chemistry B 2006, 110: 23154-23158

Wang, W.S., Xu, C.Y., Zhen, L., Yang, L., Shao, W.Z., Large-scale synthesis of SrCrO4 nanowires and PbCrO4 nanorods by a solution-phase method at room temperature, Chemistry Letters 2006, 35: 268-269

Xie, N., Shao, W.Z., Zhen, L., Feng, L.C., Mechanical and physical properties of Cu2O/Cu cermets, Ceramic Engineering & Science Proceedings: Mechanical Properties and Performance of Engineering Ceramics and Composites II 2006, 27: 423-434

Cui, Y.S., Wang, Y., Shao, W.Z., Zhen, L., Ivonov VV, Microstructure analysis and the effect of Cr additive on electrical performance of (CP-Nb)/Cu-Cd electrical contact materials, Proceeds of 52nd IEEE Holm Conference on Electrical Contacts pp 136-142

Xie, N., Shao, W.Z., Zhen, L., Feng, L.C., Electronic conductivity of inhomogeneous Cu2O-10CuAlO2-xCu cermets, Journal of the American Ceramics Society 2005, 88: 2589-2593

Shao, W.Z., Zhen, L., Li, Y.C., Cui, Y.S., Zhou, J.S., Oxidized film on CP/Cu-Cd electrical contact material, Transactions of Nonferrous Metals Society of China 2005, 15(S2): 251-255

Shao, W.Z., Xie, N., Li, Y.C., Zhen, L., Feng, L.C., Electric conductivity and percolation threshold research of Cu-Cu2O cermet, Transactions of Nonferrous Metals Society of China 2005, 15(S2): 297-301

Cui, Y.S., Shao, W.Z., Zhen, L., Ivanov, V.V., Investigation on microstructure transformation and failure behavior of Cu-Cd-Nb-CP electrical contact material, Materials Science Forum 2005, 475: 869-872

Shao, W.Z., Ivanov, V.V., Zhen, L., Cui, Y.S., Yang, D.Z., Effect of porosity and copper content on compressive strength of Cu/Cu2O cermet, Journal of Materials Science 2004, 39: 731-732

Ivanov, V.V., Shao, W.Z., Aleshchenko, V.I., Technological features of cermets of the system Cu2O-Cu, Inter. J. Conden. Matt. Res. Internet Rev. 2004

Shao, W.Z., Ivanov, V.V., Zhen, L., Cui, Y.S., Wang, Y., A study on graphitization of diamond in copper-diamond composite materials, Materials Letters 2003, 58: 146-149

Ivanov, V.V., Shao, W.Z. Aleshchenko, V.I., Technological features of cermets of the system Cu2O-Cu, Adv. Conden. Matter. Mater. Res. (Edited by Francois S) 2002, 2: 207-214

中文文章——

谢宁，邵文柱，甄良，冯立超，不同烧结助剂制备的Si3N4陶瓷氧化行为研究，《硅酸盐学报》， 2010, 38(8): 1542-1546

冯立超，甄良，邵文柱，谢宁，Cu2O-Cu复合材料制备工艺的研究，《稀有金属材料与工程》2009, 38(增刊2):431-435

冯立超，甄良，邵文柱，于雪梅，Cu2O-Cu 金属陶瓷的微观组织设计及热压工艺研究，第九届全国工程陶瓷年会，陕西 西安，2009年11月13～16日

王文寿，甄良，徐成彦，邵文柱，液相法合成空心无机微纳米结构的研究，《化学进展》 2008,20(5): 679-689

宫元勋，甄良，邵文柱，姜建堂，不同尺度CoFe2O4颗粒的水热法合成及其高频电磁性能，《功能材料》，2007,38(Suppl): 1039-1041

姜建堂，甄良，邵文柱，SiCw@Co复合材料的微观结构和磁性能，《功能材料》（增刊），2006,37(Suppl): 986-989

崔玉胜，邵文柱，王岩，甄良，CP-Nb-Cr/Cu-Cd的组织结构和使用性能研究，《功能材料》（增刊） 2004, 35:893-897

王岩，崔玉胜，邵文柱，甄良，国内铜基电接触材料专利综述，《低压电器》 2003, 4:3-7

邵文柱, 甄良, 崔玉胜, 王岩, 杨德庄，铜—金刚石电接触复合材料的导电性，《电工合金》 2002, 2:10-14

邵文柱, 周劲松, 崔玉胜, 王岩, 谷文伟, 杨德庄，CP/Cu-Cd电接触材料氧化膜组元的测定，《电工合金》 2000, 1:23-27

邵文柱, 崔玉胜, 杨德庄，CP/Cu-Cd电接触材料氧化膜的导通性，《电工合金》 2000, 2:7-16

邵文柱, 崔玉胜, 王岩, 谷文伟, 杨德庄, V. V.Ivanov. CP/Cu-Cd电接触材料制备工艺研究，《电工合金》 2000, 3: 25-33

邵文柱, 崔玉胜, 王岩, 谷文伟, 杨德庄, V. V. 伊万诺夫，CP/Cu-Cd电接触材料大气氧化动力学研究，《电工合金》 2000, 3:34-40

邵文柱, 崔玉胜, 王岩, 谷文伟, 杨德庄. CP/Cu-Cd电接触材料在电弧作用下的失效行为. 《电工合金》 2000, 4:8-22

邵文柱, 崔玉胜, 王岩, 谷文伟, 杨德庄，CP/Cu-Cd电接触材料组织和性能分析，《电工合金》 2000, 4:23-34

邵文柱，宋磊，崔玉胜，沙德生，V.V. 伊凡诺夫，杨德庄，Cu2O-Cu系金属陶瓷制备工艺研究，《材料科学与工艺》 1999, 7(1): 38-42

邵文柱，沙德生，V.V. 伊万诺夫，氧化亚铜基金属陶瓷导电性的试验研究，《材料科学与工艺》 1999, 7(2): 109-112

邵文柱，崔玉胜，Ivanov,V.V.，杨德庄，Cu-1C-1Cd粉末复合体致密化过程的研究，《材料科学与工艺》 1999, 7(4): 87-92

邵文柱，崔玉胜，电接触材料的发展与现状，《电工合金》 1999, 1:11-15

邵文柱，宋磊，崔玉胜，沙德生，V V 伊万诺夫，杨德庄，铜-金刚石复合体大气氧化动力学研究，《材料科学与工艺》 1998, 6(4): 50-54

金属材料组织性能表征



英文文章——


1. Dong, Y.B., Shao, W.Z., Jiang, J.T.,Zhen, L., Influence of quenching rate on microstructure and residual stress ofAl-Cu-Mg-Si alloy, Materials Science & Technology 2016, 32:1861-1868
2. Chao, D.Y., Shao, W.Z., Jiang, J.T.,Zhen, L., Analysis of surface orange peel of automotive aluminum alloy pipeusing electron backscatter diffraction (EBSD), KnE Materials Science 2016, 2016: 24-30
3. Dong, Y.B.,Shao, W.Z., Lu, L.X., Jiang, J.T., Zhen, L., Numerical simulation of residualstress evaluation in Al-Cu alloy block during quenching and ageing, J ournalof Materials Engineering and Performance 2015, 24: 4928-4940
4. Dong, Y.B., Shao, W.Z., Jiang, J.T.,Zhang, B.Y., Zhen, L., Minimization of residual stress in an Al-Cu Alloy forgedplate by different heat treatments, Journal of Materials Engineering andPerformance 2015, 24: 2256-2265
5. Jiang, J.T., Xiao, W.Q., Yang, L., Shao,W.Z., Yuan, S.J., Zhen, L., Ageing behavior and stress corrosion crackingresistance of a non-isothermally aged Al-Zn-Mg-Cu alloy, Materials Scienceand Engineering A 2014, 605: 167-175
6. Chen, J.F., Jiang, J.T., Zhen, L., Shao,W.Z., Stress relaxation behavior of an Al-Zn-Mg-Cu alloy in simulatedage-forming process, Journal of MaterialsProcessing and Technology 2014,214: 775-783
7. Chen, J.F., Frankel, G.S., Jiang, J.T.,Shao, W.Z., Zhen, L., Effect of age-forming on corrosion properties of anAl-Zn-Mg-Cu alloy, Materials andCorrosion 2014, 65: 670-677
8. Chen,J.F., Jiang, J.T., Zhen, L., Shao, W.Z., Stress relaxation behavior of anAl-Zn-Mg-Cu alloy in simulated age-forming process, Journal of MaterialsProcessing and Technology 2013, in press. DOI:10.1016/j.jmatprotec.2013.08.017
9. Chen,J.F., Frankel, G.S., Jiang, J.T., Shao, W.Z., Zhen, L., Effect of age-formingon corrosion properties of an Al-Zn-Mg-Cu alloy, Materials and Corrosion 2013, in press. DOI: 10.1002/maco.**
10. Fu,L.S., Jiang, J.T., Zhen, L., Shao, W.Z., FeNi₃/indium tin oxide(ITO) composite nanoparticles with excellent microwave absorption performanceand low infrared emissivity, Materials Science and Engineering B 2013,178: 225-230
11. Chen,J.F., Zhen, L., Jiang, J.T., Yang, L., Shao, W.Z., Zhang, B.Y., Microstructuresand mechanical properties of age-formed 7050 alloy, Materials Science andEngineering A 2012, 539: 115-123
12. Wang,Y., Shao, W.Z., Zhen, L., Zhang B.Y., Hot deformation behavior ofdelta-processed superalloy 718, Materials Science and Engineering A 2011, 528: 3218-3227
13. Chen,J.F., Frankel, G., Zhen, L., Shao, W.Z., The effect of stress on localizedcorrosion of AA7050, Materials Science & Technology 2011 Conference& Exhibition, October 16-20, 2011, Columbus, Ohio, USA
14. Guo,J.F., Xu, R.G., Zhao, L., Shao, W.Z., Qin, L.J., In Situ SEM investigation oftensile fracture process of Fe-25Cr-35Ni based superalloy, Advanced MaterialsResearch 2011, 279: 39-43
15. Zhen,L., Huang, M., Liu, M., Shao, W.Z., Jiang, J.T., Sun, X.Y., Effect of coolingmethod on the microstructure and properties of 7085 aluminum alloy duringnon-isomathmal aging, The 12^th International Conference onAluminum Alloys (ICAA-12), September 5-9, 2010, Yokohoma, Japan
16. Chen,J.Z., Zhen, L., Fan, L.W., Yang, S.J., Dai, S.L., Shao, W.Z., Portevin-LeChatelier effect in Al-Zn-Mg-Cu-Zr aluminum alloy, Transactions ofNonferrous Metals Society of China 2009, 19: 1071-1075
17. Wang,Y., Zhen, L., Shao, W.Z., Yang, L., Zhang, X.M., Hot working characteristicsand dynamic recrystallization of delta-processed superalloy 718, Journal ofAlloys and Compounds 2009, 474: 341-346
18. Wang,Y., Shao, W.Z., Zhen, L., Yang, C., Zhang, X.M., Tensile deformation behaviorof superalloy 718 at elevated temperatures, Journal of Alloys and Compounds 2009, 471: 331-335
19. Chen,J.Z., Zhen, L., Yang, S.J., Shao, W.Z., Dai, S.L., Investigation ofprecipitation behavior, related hardening in AA 7055 aluminum alloy, MaterialsScience and Engineering A 2009, 500: 34-42
20. Zhen,L., Hu, H.E., Wang, X.Y., Zhang, B.Y., Shao, W.Z., Distributioncharacterization of boundary misorientation angle of 7050 aluminum alloy afterhigh-temperature compression, Journal of Materials Processing Technology 2009, 209: 754-761
21. Zhen,L., Chen, J.Z., Yang, S.J., Shao, W.Z., Dai, S.L., Development ofmicrostructures and texture during cold rolling in AA 7055 aluminum alloy, MaterialsScience and Engineering A 2009, 504: 55-63
22. Wang,Y., Shao, W.Z., Zhen, L., Yang, L., Zhang, X.M., Flow behavior andmicrostructures of superalloy 718 during high temperature deformation, MaterialsScience and Engineering A 2008, 497: 479-486
23. Hu,H.E., Zhen, L., Yang, L., Shao, W.Z., Zhang, B.Y., Deformation behavior andmicrostructure evolution of 7050 aluminum alloy during high temperaturedeformation, Materials Science and Engineering A 2008, 488: 64-71
24. Hu,H.E., Yang, L., Zhen, L., Shao, W.Z., Zhang, B.Y., Relationship betweenboundary misorientation angle and true strain during high temperaturedeformation of 7050 aluminum alloy, Transactions of Nonferrous MetalsSociety of China 2008, 18: 795-798
25. Wang,Y., Shao, W.Z., Zhen, L., Zhang, X.M., Microstructure evolution during dynamicrecrystallization of hot deformed superalloy 718, Materials Science andEngineering A 2008, 486: 321-332
26. Chen,J.Z., Zhen, L., Shao, W.Z., Dai, S.L., Cui, Y.X., Through-thickness texturegradient in AA 7055 aluminum alloy, Materials Letters 2008, 62: 88-90
27. Zhu,D.Y., Zhen, L., Hu, W.H., Chen, J.Z., Cui, Y.X., Shao, W.Z., Effect of strainon DRX of 7050 aluminum alloy during extrusion at high temperature, RareEarth 2007, 26(SI): 338-343
28. Wang,Y., Shao, W.Z., Zhen, L., Lin, L., Zhang, X.M., Effect of originalmicrostructure on the hot compression behavior of superalloy 718, KeyEngineering Materials 2007, 353-358: 515-518
29. Zhen,L., Hu, W.H., Shao, W.Z., Chen, J.Z., Zhang, X.M., Zhang, B.Y., DRX in AA7050aluminum alloy during constraint deformation processing at high temperature, KeyEngineering Materials 2007, 353-358: 647-650
30. Zhu,D.Y., Zhen, L., Lin, C., Shao, W.Z., High temperature deformation mechanism of7075 aluminum alloy, Key Engineering Materials 2007, 353-358: 691-694
31. Wang,Y., Shao, W.Z., Zhen, L., Lin, L., Cui, Y.X., Investigation of dynamicrecrystallization in hot deformed in hot deformed superalloy 718, MaterialsScience Forum 2007, 546-549: 1297-1300
中文文章——
1. 郭景锋，徐仁根，晁代义，邵文柱，崔约贤，Fe-25Cr-35Ni系合金中的第二相，《理化检验–物理分册》2012, 48(8): 500-503
2. 时伟，王岩，邵文柱，甄良，刘文胜，GH4169合金高温塑性变形的热加工图，《粉末冶金材料科学与工程》2012,17(3): 281-290
3. 王岩，邵文柱，甄良，GH4169合金δ相的溶解行为及对变形机制的影响，《中国有色金属学报》2011, 21: 341-349
4. 陈军洲，甄良，戴圣龙，邵文柱，张宝友，AA7055铝合金板材屈服强度的各向异性研究，《稀有金属材料与工程》 2008,37(11): 1966-1968
5. 王岩，林琳，邵文柱，甄良，张新梅，固溶处理对GH4169合金组织和性能的影响，《材料热处理学报》2007,28(B08): 176-179
6. 张宝友，孟庆昌，李国爱，邵文柱，撞击条件下奥氏体不锈钢中的马氏体转变，2005年全国计算材料、模拟与图像分析学术会议论文集，pp384-389
7. Zhen,L., Cui, Y.X., Shao, W.Z., Yang, D.Z., Deformation and fracture behavior of aRSP Al-Li alloy, Materials Science and Engineering A 2002, 336: 135-142
8. 李义春，邵文柱，安希墉，颗粒增强铝基复合材料的时效行为，《中国有色金属学报》 1993,3 (3): 83-86
9. 李义春，邵文柱，安希墉，Al2O3颗粒对Al2O3P/Al复合材料时效析出的影响，《复合材料学报》 1993,10 (1): 47-50


极端环境下材料损伤行为及机制
中文文章


Qiao, X.S., Ye, H.J., Yang, T.N., Shao, W.Z., Zhen, L., Furman, E., Chen, L.Q., Zhang, Q.M., Internal biasing in relaxor ferroelectric polymer to enhance the electrocaloric effect, Advanced Functional Materials 2015, 25: 5134-5139
Ye, H.J.,Qian, X.S., Lu, J.H., Gu, H.M., Zhang, S.J., Zhang, Q.M., Jeong, D.Y., Shao, W.Z., Zhen, L., Dielectric and electrocaloric responses of Ba(Zr_0.2Ti_0.8)O₃bulk ceramics and thick films with sintering aids, IEEE Transactions on Dielectrics and Electrical Insulation Society 2015, 22: 1501-1505
Ye, H.J., Qian, X.S., Jeong, D.Y., Zhang, S.J., Zhou, Y., Shao, W.Z., Zhen, L., Zhang, Q.M., Giant electrocaloric effect in BaZr_0.2Ti_0.8O₃ thick film, Applied Physics Letters 2014, 105: 152908
Ye, H.J., Yang, L., Shao, W.Z., Li, Y., Sun, S.B., Zhen, L., Effect of electron irradiation on electroactive phase and dielectric properties of poly(vinylidene fluoride) films, RSC Advances 2014, 4: 13525-13532
Sun, X.Y., Chen, C.L., Yang, L., Lv, L.X., Atroshenko, S., Shao, W.Z., Sun, X.D., Zhen, L.,Experimental study on modulated structure in Alnico alloys under high magnetic field and comparison with phase-field simulation, Journal of Magnetism and Magnetic Materials 2013, 348: 27-32
Ye, H.J., Shao, W.Z., Zhen, L., Crystallization kinetics and phase transformation of poly(vinylidene fluoride) films incorporated with functionalized BaTiO₃ nanoparticles, Journal of Applied Polymer Science2013, 129: 2940-2949
Ye, H.J., Shao, W.Z., Zhen, L., Tetradecylphosphonicacid modified BaTiO₃nanoparticles and its nanocomposite, Colloids and Surfaces A: Physicochemical and Engineering Aspects 2013, 427: 19-25
Ye, H.J., Yang, L., Shao, W.Z., Sun, S.B., Zhen, L., Effect of electroactive phase transformation on electron structure and dielectric properties of uniaxial stretching poly(vinylidene fluoride) films, RSC Advances 2013, 3: 23730-23736
Ye, H.J., Shao, W.Z., Zhen, L., Crystallization kinetics and phase transformation of poly(vinylidene fluoride) films incorporated with functionalized BaTiO3 nanoparticles, Journal of Applied Polymer Science 2013, 129: 2940-2949
Ye, H.J., Shao, W.Z., Zhen, L., Tetradecylphosphonic acid modified BaTiO3 nanoparticles and its nanocomposite, Colloids and Surfaces A: Physicochemical and Engineering Aspects 2013, 427: 19-25
Sun, X.Y., Chen, C.L., Yang, L., Lv, L.X., Atroshenko, S., Shao, W.Z., Sun, X.D., Zhen, L., Experimental study on modulated structure in Alnico alloys under high magnetic field and comparison with phase-field simulation, Journal of Magnetism and Magnetic Materials, 2013, 348: 27-32
Zou, D.L., Zhen, L., Xu, C.Y., Shao, W.Z., Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact, Materials Characterization 2011, 62: 496-502
Yang, L., Zhen, L., Xu, C.Y., Sun, X.Y., Shao, W.Z., Effects of proton irradiation on structure of NdFeB permanent magnets studied by X-ray diffraction and X-ray absorption fine structure, Journal of Magnetism and Magnetic Materials 2011, 323: 4-6
Zou, D.L., Zhen, L., Zhu, Y., Xu, C.Y., Shao, W.Z., Pang, B.J., Deformed microstructure evolution in AM60B Mg alloy under hypervelocity impact at a velocity of 5 km·s-1, Materials and Design 2010, 31: 3708-3715
Zhen, L., Zou, D.L., Xu, C.Y., Shao, W.Z., Microstructure evolution of adiabatic shear band in AM60B magnesium alloy under ballistic impact, Materials Science and Engineering A 2010, 527: 5728-5733
Zou, D.L., Zhen, L., Zhu, Y., Xu, C.Y., Shao, W.Z., Pang, B.J., Deformed microstructure and mechanical properties of AM60B magnesium alloy under hypervelocity impact at a velocity of 4 km/s, Materials Science and Engineering A 2010, 527: 3323-3328
Yang, L., Zhen, L., Yan, W.S., Xu, C.Y., Sun, X.Y., Shao, W.Z., XMCD study of Fe-Cr-Co alloy under electron irradiation, Journal of Electron Spectroscopy and Related Phenomena 2010, 180: 34-38
Zhen, L., Ji, J.Y., Xu, C.Y., Li, G.A., Zou, D.L., Shao, W.Z., Deformed microstructure of AZ91 magnesium alloy impacted by projectiles with velocities of 2 - 3 km/s, Journal of Solid Mechanics and Materials Engineering 2010, 4: 720-726
Yang, L., Zhen, L., Xu, C.Y., Sun, X.Y., Shao, W.Z., Effects of proton irradiation on electronic structure of NdFeB permanent magnets, Nuclear Instruments and Methods in Physics Research Section B 2009, 267: 3084-3086
Sun, X.Y., Zhen, L., Xu, C.Y., Lv, L.X., Shao, W.Z., Sun, X.D., M？ssbauer spectrometry study of early stage spinodal decomposition in Fe-Cr-Co alloy under high magnetic field, Materials Letters 2009, 63: 64-65
Zhen, L., Li, G.A., Zou, D.L., Shao, W.Z., Characterization of the deformed microstructure in 1Cr18NiTi stainless steel under ballistic impact, Materials Science and Engineering A 2008, 489: 213-219
Gao, R.S., Zhen, L., Shao, W.Z., Hao, X.P., Sun, X.Y., Yang, L., Wang, B.Y., Study of γ-ray irradiation effect on permanent magnets, Journal of Applied Physics 2008, 103: 07E136
Gao, R.S., Zhen, L., Shao, W.Z., Xu, C.Y., Li, G.A., Effect of γ-ray irradiation on magnetic properties of NdFeB and Fe-Cr-Co permanent magnets, Journal of Magnetism and Magnetic Materials 2006, 31: 156-159
Gao, R.S., Zhen, L., Shao, W.Z., Sun, X.Y., Zhu, D.Y., Xu, R.G., Magnetic stability of Fe-Cr-Co permanent magnet materials at high temperature, Materials Science Forum 2005, 475: 2135-2138
Gao, R.S., Zhen, L., Shao, W.Z., Sun, X.Y., Zhu, D.Y., Xu, R.G., Study on thermomagnetic treatment Fe-25.5Cr-12Co permanent magnetic alloy, Transactions of Materials and Heat Treatment 2004, 25 (5): 561-563
中文文章—— 1. 甄良，易忠，杨丽，孟立飞，姜利祥，邵文柱，不同尺寸的NdFeB稀土永磁体热退磁行为研究，《中国稀土学报》2013, 31(1):26-30

2. 姜利祥，易忠，甄良，孟立飞，邵文柱，杨丽，刘宇明，Fe-Ni软磁合金质子辐照效应研究，《航天器环境工程》2012, 29(3):312-314

3. 杨丽，甄良，刘艳红，邵文柱，Study on defects of FeAlsoft magnetic alloy under proton and electron irradiation,《材料科学与工艺》 2011,19(Suppl 1): 19-22

4. 高润生，杨丽，王雪航，甄良，邵文柱，稀土永磁材料辐照效应研究进展，《材料科学与工艺》 2008, 16(2):267-270

5. 高润生，甄良，邵文柱，徐成彦，孙学银，郭立新，Fe-Cr-Co合金的激光辐照效应研究，第十二届全国磁学及磁性材料会议，福建 武夷山，2005年11月

6. 高润生，甄良，邵文柱，吕良星，孙学银，徐仁根，Fe-Cr-Co合金高温磁稳定性研究，《功能材料》（增刊） 2004, 35 :711-714

7. 徐成彦，甄良，赵立，徐仁根，邵文柱，快淬Sm-Co合金的结构和磁性能，《电工材料》 2003, (1):26-30

8. 张小菊, 徐仁根, 吴危航, 左旺孟, 邵文柱, 杨德庄，磁场热处理对Fe-Cr-Co合金组织与性能的影响，《电工合金》 2002, 2:31-35




专利
授权专利——



序号

发明人

专利名称

授权时间

专利号

附件号
邵文柱、甄良

电解铝用氧化亚铜基金属陶瓷惰性阳极材料

2005.12.14

(2003.7.29申请)

ZL 03 1 32536.X

240470
邵文柱、甄良

铜基粉末电触头的制备方法

2005.7.6

(2003.7.30申请)

ZL 03 1 32535.1

216523
邵文柱、甄良

电器触点用铜基电接触复合材料

2005.6.22

(2003.7.30申请)

ZL 03 1 32543.2

214553
邵文柱、崔玉胜、甄良、冯立超

复相陶瓷热电偶及其制备方法

2007.10.17

(2005.9.29申请)

ZL 2005 1 **.0

2005 10 010402.0
邵文柱、崔玉胜、甄良、李义春

组装式陶瓷热电偶

2007.10.17

(2005.1.28申请)

ZL 2005 1 **.7


邵文柱、甄良、崔玉胜、冯立超、李义春

层压式陶瓷热电偶及其制备方法

2008.2.27

(2005.1.19申请)

ZL 2005 1 **.4


甄良、崔玉胜、邵文柱、李义春

测量材料Seebeck系数的方法和设备

2008.6.25

(2005.10.14申请)

ZL 2005 1 **.2


甄良、姜建堂、邵文柱、杨丽

共振反共振电磁复合材料及其制备方法

2010.5.28

(2005.11. 9申请)

ZL **0.1

-
邵文柱、崔玉胜、甄良、杨丽

一种测试电触头材料电侵蚀性的装置

2011.11.02

(2007.12.29申请)

ZL **8.9

-
甄良、邵文柱、王文寿、孙学银、 徐成彦、杨丽、姜建堂

一种磁场诱导磁性纳米线的制备方法

2012.06.13

(2010.10.15申请)

ZL **7


甄良、邵文柱、孙学银、徐成彦、杨丽、姜建堂、王文寿

大尺寸环形磁钢零件精密磁场时效处理方法

2012.08.15

(2010.10.15申请)

ZL **0


甄良、邵文柱、孙学银、徐成彦、杨丽、姜建堂、王文寿

永磁零件磁性能稳定化处理方法

2012.08.15

(2010.10.18申请)

ZL **7.8


申请专利——



序号

发明人

专利名称

申请时间

申请号

附件号
姜建堂、甄良、邵文柱、徐成彦

陶瓷晶须表面化学镀的方法

2009.2.27

**1.3

-
邵文柱，甄良，王文寿

一种纳米氧化物改性铜基电接触材料的制备方法

2012.11.08

**8.4


邵文柱，甄良，姜建堂

一种TCO/Cu电接触材料

2012.11.08

**6.5


邵文柱，甄良，徐成彦

一种TCO/Ag电接触材料

2012.11.09

**5.4




会议论文
Xu, Y.Z., Zou, D.L., Xu, C.Y., Shao, W.Z., Chen, J.F., Zhen, L., Microstructures and phase transformation in Al₂O₃ ceramic fragments under hypervelocity impact, Asian Pacific Conference on Fracture and Strength - Mechanics and Materials 2012 (APCFS-MM), May 13 – 16, 2012, BEXCO/Haeundae Centum Hotel, Busan, KoreaZhen, L., Huang, M., Liu, M., Shao, W.Z., Jiang, J.T., Sun, X.Y., Effect of cooling method on the microstructure and properties of 7085 aluminum alloy during non-isomathmal aging, The 12^th International Conference on Aluminum Alloys (ICAA-12), September 5-9, 2010, Yokohoma, JapanYan, S.J., Zhen, L., Xu, C.Y., Jiang, J.T., Shao, W.Z., The electromagnetic wave absorption properties of FeNi₃ nanospheres and FeNi₃@C nanocapsules, 2010 IEEE International Symposium on Antenna and Propagations and CNS/USNC/URSI Radio Science Meeting, July 11-17, 2010, Toronto, Ontario, CanadaJiang, J.T., Zhen, L., Shao, W.Z., Effect of microstructure on electromagnetic properties of ferromagnetic/dielectric composite particles, 2010 IEEE International Symposium on Antenna and Propagations and CNS/USNC/URSI Radio Science Meeting, July 11-17, 2010, Toronto, Ontario, CanadaGong, Y.X., Mittra, R., Zhen, L., Shao, W.Z., Design of a two-layer ultra-wideband microwave absorber, 2010 IEEE International Symposium on Antenna and Propagations and CNS/USNC/URSI Radio Science Meeting, July 11-17, 2010, Toronto, Ontario, CanadaLi, G.A., Zhen, L., Xu, C.Y., Zhang, B.Y., Shao, W.Z., Formation process and final microstructure of ASB in 40Cr steel at 2 - 6 km/s impact velocity, Asian Pacific Conference on Materials and Mechanics 2009, Yokohama, Japan, Nov. 13-16, 2009Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Template-free aqueous solution synthesis of homogeneous CdMoO₄ core-shell microspheres and their optical properties, The 235^th ACS National Meeting, New Orleans, LA, April 6-10, 2008Xu, C.Y., Wang, W.S., Zhen, L., Shao, W.Z., Room-temperature synthesis of PbCrO₄ nanorods and SrCrO₄ nanowires by an aqueous solution route, The 233^rd ACS National Meeting, Chicago, IL, March 25-29, 2007Wang, W.S., Zhen, L., Xu, C.Y., Shao, W.Z., Template-free preparation of hollow CdMoO₄ microspheres at room temperature, The 233^rd ACS National Meeting, Chicago, IL, March 25-29, 2007Gao, R.S., Zhen, L., Shao, W.Z., Hao, X.P., Sun, X.Y., Yang, L., Wang, B.Y., Study of γ-ray irradiation effect on permanent magnets, The 52^nd Magnetism and Magnetic Materials Conference, Tampa, FL, November 5-9, 2007 (paper published in Journal of Applied Physics, )Sun, X.Y., Zhen, L., Shao, W.Z., Xu, C.Y., Gao, R.S., Spinodal microstructure and magnetic properties of the Fe-25Cr-12Co-1Si alloy treated in a 12 T magnetic field, The 52^nd Magnetism and Magnetic Materials Conference, Tampa, FL, November 5-9, 2007Xie, N., Shao, W.Z., Zhen, L., Feng, L.C., Electronic conductivity of inhomogeneous Cu₂O-10CuAlO₂-xCu cermets, International Conference on New Frontiers of Process Science and Engineering in Advanced Materials (PSEA’04) Kyoto, 2004, pp 75-80邵文柱，王珊珊，刘巧娣，崔约贤，1050铝膜片断裂分析，黑龙江省金属学会2011年学术交流年会，2011年8月6日，哈尔滨