基本信息教学招生科学研究论文专著(Papers)发明专利English version
基本信息
哈尔滨工业大学 材料科学与工程学院（材料工程系） 教授/博士生导师

金属精密热加工国家级重点实验室、先进焊接与连接国家重点实验室 固定研究人员

先后主持"973"课题、国家自然科学基金、预研项目、国家重点研发计划子课题、重点实验室基金等课题10余项，参研“973”、国家重大科技专项、预研项目、国家自然科学基金重点项目等课题20余项。

在国内外学术期刊及会议上发表论文170余篇, 其中SCI收录130余篇, SCI引用1500余次，EI收录150余篇；参编专著1部；获黑龙江省科学技术奖一等奖1项、二等奖1项；授权中国发明专利30余项。

研究方向
TiAl金属间化合物凝固组织控制及精密热成形（精密铸造、等温锻造、热轧、热挤压）技术

新型高温钛合金成分设计及精密热成形（精铸、锻造开坯、热轧）技术

钛基复合材料（原位自生复合、钛合金-TiAl叠层仿生复合）制备及组织性能调控

钛合金及TiAl金属间化合物粉末冶金（热等静压、热挤压、等温锻、热轧）技术

新型金属间化合物成分设计与制备

新型钛基新能源材料的制备与成形


工作经历
2003年-2005年： 哈尔滨工业大学 材料科学与工程学院 材料工程系 讲师2003年-2005年： 哈尔滨工业大学 力学博士后流动站 博士后2009年-2010年： 新西兰 怀卡托大学(University of Waikato ) Research Fellow2005年-2013年： 哈尔滨工业大学 材料科学与工程学院 材料工程系 副教授2011年-目 前： 哈尔滨工业大学 材料科学与工程学院 材料工程系 博士生导师2013年-目 前： 哈尔滨工业大学 材料科学与工程学院 材料工程系 教授


教育经历
1990年09月-1994年07月： 哈尔滨工业大学 学士学位1998年09月-2000年07月： 哈尔滨工业大学 硕士学位2000年09月-2003年09月： 哈尔滨工业大学 博士学位


学术兼职
中国材料研究学会 — 金属间化合物与非晶合金分会 理事

国际材料期刊《Advances in Materials Science and Engineering》 编委 (IF1.372, Academic Editor)

国际材料期刊《Innovations in Corrosion and Materials Science》 编委

Journal of Materials Science、Journal of Alloys and Compounds、Advanced Engineering Materials、Materials and Design、Intermetallics等30余种国内外学术期刊审稿人


讲授课程
硕士研究生课程1门本科生课程3门


招生信息
硕士招生:

每年计划招生2人

博士招生:

每年计划招生1-2人

欢迎有兴趣从事航天、航空、新能源等材料及其成形加工技术研究的学生加入课题组！


研究领域
TiAl金属间化合物凝固组织控制及精密热成形（精密铸造、等温锻造、热轧、热挤压）技术

新型高温钛合金成分设计及精密热成形（精铸、锻造开坯、热轧）技术

钛基复合材料（原位自生复合、钛合金-TiAl叠层仿生复合）制备及组织性能调控

钛合金及TiAl金属间化合物粉末冶金（热等静压、热挤压、等温锻、热轧）技术

新型金属间化合物成分设计与制备

新型钛基新能源材料的制备与成形

奖项成果
黑龙江省科学技术奖 自然科学类 一等奖1项黑龙江省科学技术奖 自然科学类 二等奖1项黑龙江省高校科技奖 二等奖1项


科研项目
国家自然科学基金

“973”课题

预研项目

国家重点研发计划子课题


期刊论文
在国内外学术期刊及会议上发表论文170余篇，其中SCI收录130余篇，SCI引用1500余次，H因子23；EI收录150余篇。参编专著《精密热加工新技术》，国防工业出版社（2016）。

---

A Novel Composition Design Method for Beta-Gamma TiAl Alloys with Excellent Hot Workability.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,vol. 49A(11), pp.5574-5584, 2018
Interface characteristics of Ti6Al4V-TiAl metal-intermetallic laminate (MIL) composites prepared by a novel hot-pack rolling.

MATERIALS CHARACTERIZATION,vol. 144, pp.173-181, 2018
Microstructure Homogeneity and Mechanical Properties of Large-Size As-Cast High Nb Containing TiAl Alloy Ingot.

PHYSICS OF METALS AND METALLOGRAPHY,vol. 119(9), pp.899-906,2018
Effect of 2-6 at.% Mo addition on microstructural evolution of Ti-44Al alloy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,vol. 34(7),pp.1196-1204,2018

Microstructure, texture and tensile properties of Ti-47Al-2Cr-2Nb alloy produced by selective electron beam melting.

Journal of Alloys and Compounds, vol. 766, pp.450-459 ,2018
Selective electron beam melting of TiAl alloy: Microstructure evolution, phase transformation and microhardness.

Materials Characterization, vol. 142, pp. 584–592, 2018

Effect of beam current on microstructure, phase, grain characteristic and mechanical properties of Ti-47Al-2Cr-2Nb alloy fabricated by selective electron beam melting.

Journal of Alloys and Compounds, vol. 750, pp. 617–625, 2018

A high-performance β-solidifying TiAl alloy sheet: Multi-type lamellar microstructure and phase transformation.

Materials Characterization, vol. 138, pp. 136–144, 2018

Modification of microstructure and properties of Ti-47Al-2Cr-4Nb-0.3W alloys fabricated by SPS with trace multilayer graphene addition.

Materials Characterization, vol. 138, pp. 1–10, 2018

A high-performance β-stabilized Ti-43Al-9V-0.2Y alloy sheet with a nano-scaled antiphase domain.

Materials Letter, vol. 214, pp. 182–185, 2018

Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: Lamellar colonies evolution and tensile properties. Materials and Design 121 ,pp.202-212, 2017

Hot deformation behavior and microstructural evolution of as-forged Ti-44Al-8Nb-(W, B, Y) alloy with nearly lamellar microstructure.

Intermetallics, vol. 81 ,pp.62-72, 2017

High strength in high Nb containing TiAl alloy sheet with fine duplex microstructure produced by hot pack rolling.

Journal of Alloys and Compounds, vol. 695,pp.3495-3502, 2017

Effects of direct rolling deformation on the microstructure and tensile properties of the 2.5 vol% (TiBw+TiCp)/Ti composites.

Materials Science and Engineering A, vol. 684,pp.645-651, 2017

Low cycle fatigue, creep and creep-fatigue interaction behavior of a TiAl alloy at high temperatures.

Scripta Materialia, vol. 144, pp.60–63, 2018

Dynamic recrystallization of the constituent γ phase and mechanical properties of Ti-43Al-9V-0.2Y alloy sheet.

Materials, vol. 10, no. 9, pp., 2017

Electrochemical corrosion and bioactivity of Ti-Nb-Sn-hydroxyapatite composites fabricated by pulse current activated sintering.

Journal of the Mechanical Behavior of Biomedical Materials, vol. 75, pp.222–227, 2017

Improvement of microstructure, mechanical properties and hot workability of a TiAl-Nb-Mo alloy through hot extrusion. Materials Science and Engineering A 705,pp.200-209, 2017

Effect of dwell condition on fatigue behavior of a high-Nb TiAl alloy at 750 °C.

Intermetallics 91 ,pp.1-7, 2017

Effect of heat treatment on the microstructure and tensile properties of as-forged 2.5%(TiB TiC)/Ti composite.

Rare Metal Materials and Engineering, vol. 45 (12),pp.3172-3176, 2016

Tensile mechanical behavior and failure mechanism of (TiBw+TiCp)/Ti composites at elevated temperature.

Chinese Journal of Nonferrous Metals, vol. 26 (11) ,pp.2287-2295, 2016

Research progress of powder metallurgical technology for intermetallic titanium aluminide.

Rare Metal Materials and Engineering, vol. 45 (9),pp.2466-2472, 2016

Research progress of ω phase in high Nb containing TiAl based alloy.

Rare Metal Materials and Engineering, vol. 45 (7),pp.1903-1909, 2016

Thermomechanical processing of (TiB TiC)/Ti matrix composites and effects on microstructure and tensile properties.

Journal of Materials Research, vol. 31 (9) ,pp.1244-1253, 2016

Microstructures and mechanical properties of Ti-43Al-5V-4Nb-Y alloy consolidated by spark plasma sintering.

Key Engineering Materials, vol. 704 ,pp.183-189, 2016

Hot deformation behavior and dynamic recrystallization of a β-solidifying TiAl alloy
Materials Science and Engineering A, vol. 652, pp. 231–238, 2016

Microstructural evolution, hot workability, and mechanical properties of Ti-43Al-2Cr-2Mn-0.2Y alloy
Materials and Design, vol. 89, pp. 1020–1027, 2016

Effects of rolling deformation on microstructure and hardness of Ti-45Al-9Nb-0.3Y alloy
Journal of Rare Earths, vol. 34, no. 2, pp. 197-202, 2016

Deformation behavior of high Nb containing TiAl based alloy in α+γ two phase field region
Materials and Design, vol. 90, pp. 225–229, 2016

Microstructure and properties of a beta-solidifying TiAl-based alloy with different refiners
Rare Metals, vol. 35, no. 1, pp. 42–47, 2016

Effect of (α+β) heat treatment on microstructure and mechanical properties of (TiB+TiC)/Ti-B20 matrix composite
Materials and Design, vol. 87, pp. 488–494, 2015

Strain rate dependence of microstructural evolution in β titanium alloy during subtransus superplastic deformation
Journal of Alloys and Compounds, vol. 647, pp. 1–5, 2015

Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength beta titanium alloy sheets
Materials Science and Engineering A, vol. 631, pp. 67–74, 2015

Effect of HA content on microstructure and compression properties of Ti-Nb-Sn/HA composites fabricated by plasma current activated sintering
Materials Science Forum, vol. 816, pp. 705–710, 2015

Hot deformation behavior of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe alloy in α + β field
Metals, vol. 5, no. 1, pp. 216–227, 2015

Preparation and microstructural analysis of TiAl alloy sheet
Materials China, vol. 34, no. 5, pp. 379–382, 2015

Effects of heat treatment on microstructure and mechanical properties of as-forged Ti-45Al-9Nb-Y alloy
Transactions of Materials and Heat Treatment, vol. 36, no. 8, pp. 90–95, 2015

Characterization of hot deformation behavior of as-forged TiAl alloy
Intermetallics, vol. 55, pp. 66–72, 2014

Hot workability of as-cast Ti-45Al-5.4V-3.6Nb-0.3Y alloy
Journal of Alloys and Compounds vol. 589 pp. 609–614, 2014

Progress of deformed TiAl alloys
Journal of Aeronautical Materials, vol. 34, no. 4, pp. 112–118, 2014

Direct rolling of Ti-6Al-4V-0.1B alloy sheets in the β phase region
Materials Science and Engineering A vol. 577 pp. 1–8, 2013

Effect of heat treatment on microstructure and mechanical properties of a new β high strength titanium alloy
Materials and Design vol. 55 pp. 183–190, 2014

Research progress in preparation of TiAl interemetallic based compound
Rare Metal Materials and Engineering, vol. 43, no. 3, pp. 757–762, 2014

Effects of trace TiB2 on microstructure in cast titanium alloys
International Journal of Cast Metals Research, vol. 25, no. 6, pp. 358–363, 2012

High temperature creep and fatigue behavior and life prediction method of a TiAl alloy
Acta Metallurgica Sinica, vol. 49, no. 11, pp. 1311–1317, 2013

The hot deformation behavior of Ti-43Al-9V-Y alloy
Acta Metallurgica Sinica, vol. 49, no. 11, pp. 1363–1368, 2013

Microstructure and properties of Ti-43Al-5V-4Nb alloy fabricated by elemental powder metallurgy forging process
Material Science and Technology, vol. 21, no. 4, pp. 84–88, 2013

Fabrication of thin-walled high-temperature titanium alloy component by investment casting
Materials and Manufacturing Processes, vol. 28, no. 6, pp. 605–609, 2013

Microstructure and tensile properties of 1-D forged (TiB+TiC)/Ti composite
Materials Science Forum, vol. 747-748, pp. 926–931, 2013

Microstructure and mechanical properties of large size Ti-43Al-9V-0.2Y alloy pancake produced by pack-forging
Intermetallics, vol. 34, pp. 29–34, 2013

Microstructure and mechanical properties of TiAl alloys produced by rapid heating and open die forging of blended elemental powder compacts
Materials Science and Engineering A, vol. 563, pp. 46–52, 2013

Microstructure and tensile properties of Ti-6Al-4V-0.1B alloys of direct rolling in the near Β phase region
Materials Science and Engineering A, vol. 560, pp. 140–147, 2013

Low-temperature superplasticity of forged Ti-43Al-4Nb-2Mo-0.5B alloy
Journal of Alloys and Compounds, vol. 543, pp. 19–25, 2012

Phase transformation and microstructure evolution of differently processed Ti-45Al-9Nb-Y alloy
Intermetallics, vol. 31, pp. 208–216, 2012

Effect of yttrium on microstructure and mold filling capacity of a near-α high temperature titanium alloy
China Foundry, vol. 9, no. 4, pp. 344–348, 2012

Microstructure evolution, hot deformation behavior and mechanical properties of Ti-43Al-6Nb-1B alloy
Intermetallics, vol. 31, pp. 249–256, 2012

Effect of different primary coating materials and mold temperatures on fluidity of high-temperature titanium alloy
Journal of Engineering Manufacture, vol. 226, no. 11, pp. 1862–1868, 2012

Temperature dependence of tensile properties and fracture behavior of as rolled TiB/Ti composite sheet
Materials Science and Engineering A, vol. 556, pp. 962–969, 2012

Evolution of grain boundary and texture in as-forged Ti-45Al-9Nb-Y alloy during tensile test at different temperature
Intermetallics, vol. 27, pp. 31–37, 2012

Evolution of microstructure and tensile properties of in situ titanium matrix composites with volume fraction of (TiB+TiC) reinforcements
Materials Science and Engineering A, vol. 548, pp. 152–160, 2012

Characterization of zirconia-based slurries with different binders for titanium investment casting
China Foundry, vol. 9, no. 2, pp. 125–130, 2012

Evolution of microstructural characteristic and tensile properties during preparation of TiB/Ti composite sheet
Materials and Design, vol. 36, pp. 505–510, 2012

High temperature deformation behavior of Ti-46Al-2Cr-4Nb-0.2Y alloy
Materials Science and Engineering A, vol. 539, pp. 107–114, 2012

Effect of pack rolling on microstructures and tensile properties of as-forged Ti-44Al-6V-3Nb-0.3Y alloy
Intermetallics, vol. 21, no. 1, pp. 97–104, 2012

Microstructure characterization and mechanical properties of TiB 2/TiAl in situ composite by induction skull melting process
Materials Science and Engineering A, vol. 532, pp. 522–527, 2012

Microstructure and mechanical properties of large size as-cast Ti-43Al-9V-0.2Y (at.%) alloy ingot from brim to centre
Materials and Design, vol. 33, no. 1, pp. 485–490, 2012

Progress in β-solidifying γ-TiAl based alloys
Chinese Journal of Rare Metals, vol. 36, no. 1, pp. 154–160, 2012

High temperature deformation behaviors of Ti-45Al-2Nb-1.5V-1Mo-Y alloy
Intermetallics, vol. 19, no. 12, pp. 1767–1774, 2011

Ti-Nb-Sn-hydroxyapatite composites synthesized by mechanical alloying and high frequency induction heated sintering
Journal of the Mechanical Behavior of Biomedical Materials, vol. 4, no. 8, pp. 2074–2080, 2011

Microstructure characterization and tensile properties of β phase containing TiAl pancake
Journal of Alloys and Compounds, vol. 509, no. 42, pp. 10179–10184, 2011

Effect of Mo addition on microstructures and mechanical properties of Ti2AlNb alloy
Advanced Materials Research, vol. 308-310, pp. 142–145, 2011

Microstructure and fracture toughness of a β phase containing TiAl alloy
Intermetallics, vol. 19, no. 10, pp. 1405–1410, 2011

Interfacial reactions between Ti-1100 alloy and ceramic mould during investment casting
Transactions of Nonferrous Metals Society of China (English Edition), vol. 21, no. SUPPL. 2, pp. s348–s352, 2011

Research on calculating model and software for insulating riser of steel castings
Foundry, vol. 60, no. 8, pp. 754–758, 2011

Improvement in collapsibility of ZrO 2 ceramic mould for investment casting of TiAl alloys
China Foundry, vol. 8, no. 1, pp. 9–13, 2011

Interfacial microstructure and shear strength of Ti-6Al-4V/TiAl laminate composite sheet fabricated by hot packed rolling
Materials and Design, vol. 32, no. 6, pp. 3167–3172, 2011

Constitution modeling and deformation behavior of yttrium bearing TiAl alloy
Journal of Rare Earths, vol. 29, no. 2, pp. 114–118, 2011

Microstructure evolution in rapidly solidified y added TiAl ribbons
Intermetallics, vol. 19, no. 2, pp. 160–164, 2011

Effect of heat treatment on microstructures and tensile properties of as-forged Ti-45Al-5Nb-0.3Y alloy
Intermetallics, vol. 19, no. 2, pp. 212–216, 2011

Effect of V and Nb additions on microstructure, properties, and deformability of Ti-45Al -9 (V, Nb, Y) alloy
China Foundry, vol. 7, no. 4, pp. 357–361, 2010

Microstructure, mechanical properties, hot deformation and oxidation behavior of Ti-45Al-5.4V-3.6Nb-0.3Y alloy
Journal of Alloys and Compounds, vol. 498, no. 1, pp. 95–101, 2010

Effect of spark plasma sintering temperature on the microstructure and mechanical properties of a Ti2AlC/TiAl composite
Journal of Alloys and Compounds, vol. 496, no. 1-2, pp. 462–466, 2010

Microstructure and mechanical properties of as-cast Ti-43Al-9V-0.3Y alloy
Journal of Alloys and Compounds, vol. 473, no. 1-2, pp. 123–126, 2009

Effects of thermo-mechanical treatments on microstructure of Ti-43Al-9V-Y alloy
International Journal of Modern Physics B, vol. 23, no. 6-7, pp. 1009–1013, 2009

Influence of yttrium on the high temperature deformability of TiAl alloys
Materials Science and Engineering A, vol. 499, no. 1-2, pp. 53–57, 2009

Continuous cooling phase transformation of Ti-45Al-5Nb(-0.3Y) alloys
Rare Metal Materials and Engineering, vol. 38, no. 1, pp. 25–28, 2009

Effects of forging and rolling on micro-structure and mechanical property of Ti-43Al-9V-0.3Y alloy
Acta Metallurgica Sinica, vol. 44, no. 7, pp. 815–820, 2008

Microstructural refinement and mechanical properties of Y-bearing TiAl alloys
Journal of Alloys and Compounds, vol. 457, no. 1-2, pp. 265–269, 2008

Effects of thermo-mechanical treatment on microstructure and mechanical property of Ti-45Al-5Nb-0.3Y alloy
Acta Metallurgica Sinica, vol. 44, no. 6, pp. 757–763, 2008

Microstructure refining of TiAl alloys
Acta Metallurgica Sinica, vol. 44, no. 5, pp. 551–556, 2008

Development of rapidly solidified titanium aluminide compounds
Acta Metallurgica Sinica, vol. 44, no. 5, pp. 569–573, 2008

Microstructure evolution of TiAl composite powder during low temperature high-energy milling
Rare Metal Materials and Engineering, vol. 37, no. 2, pp. 236–239, 2008

Effects of minor yttrium addition on microstructure, mechanical properties and hot workability of Nb or v containing TiAl alloys
Materials Science Forum, vol. 539-543, no. PART 2, pp. 1577–1582, 2007

Microstructure of rapidly solidified Ti-46Al-2Cr-2Nb-xY alloys
Advanced Materials Research, vol. 29-30, pp. 103–106, 2007

Isothermal deformation simulation and canned forging of Ti-45Al-5Nb-0.3Y alloy
Journal of Aeronautical Materials, vol. 27, no. 3, pp. 42–46, 2007

Effects of solution temperature on microstructures and properties of Ti-23Al-25Nb-0.36Y alloy
Heat Treatment of Metals, vol. 32, no. 5, pp. 59–62, 2007

Essence of room temperature brittleness of TiAl based alloys and improving approaches
Journal of Advanced Materials, vol. 39, no. 1, pp. 33–40, 2007

Effects of minor yttrium addition on hot deformability of lamellar Ti-45Al-5Nb alloy
Transactions of Nonferrous Metals Society of China (English Edition), vol. 17, no. 1, pp. 58–63, 2007

Effects of yttrium on microstructure and properties of TiAl alloy
Special Casting and Nonferrous Alloys, vol. 26, no. 12, pp. 762–765, 2006

Effects of Y on compression properties of Ti-23Al-25Nb alloy
Journal of Aeronautical Materials, vol. 26, no. 6, pp. 1–5, 2006

Microstructure and interface reaction of investment casting TiAl alloys
Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL. 3, pp. 1910–1914, 2006

Production and characterization of TiAl ribbons with Y additions
Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL., pp. s711–s714, 2006

Influence of yttrium on microstructure and properties of Ti-23Al-25Nb alloy after heat treatment
Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL., pp. s849–s853, 2006

Effect of yttrium addition on microstructures and room temperature tensile properties of Ti-47Al alloy
Journal of Rare Earths, vol. 24, no. 3, pp. 352–356, 2006

Microstructures and properties of titanium alloys Ti-Mo for dental use
Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. SUPPL., pp. s824–s828, 2006

Effects of yttrium on microstructure and properties of Ti-23Al-25Nb alloy after heat treatment
Rare Metal Materials and Engineering, vol. 35, no. 4, pp. 655–658, 2006

Effects of yttrium on microstructures and properties of Ti-17Al-27Nb alloy
Transactions of Nonferrous Metals Society of China (English Edition), vol. 16, no. 2, pp. 316–320, 2006

Alloying design of titanium aluminum intermetallics and research progress
Journal of Aeronautical Materials, vol. 26, no. 2, pp. 72–78, 2006

Effect of yttrium on the microstructure of Ti-23Al-25Nb alloy
Journal of Aeronautical Materials, vol. 26, no. 1, pp. 6–10, 2006

Effect of rare earth Y(0.3 at%) on as-cast microstructure of Ti-45Al-5Nb alloy
Rare Metal Materials and Engineering, vol. 35, no. 1, pp. 1–4, 2006

Effect of rare earth element y on hot-press deformation behavior of Ti-43A1-9V alloy
Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 81–82, 2005

Preparing and analyzing of investment cast mould shell for titanium alloys
Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 220–221, 2005

Preparation of fine-grains TiAl alloys by mechanical alloying and spark plasma sintering
Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 448–449, 2005

High temperature pack-rolling of Ti-43 Al-9V-0.3Y alloy sheets
Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 452, 2005

Effect of rare earth y on microstructures and mechanical properties of Ti-45Al-5Nb alloy
Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 397, 2005

Effect of various heat treatment conditions on microstructures and mechanical properties of Ti-23Al-25Nb
Rare Metal Materials and Engineering, vol. 34, no. SUPPL. 3, pp. 400–401, 2005

Electron structure of γ/α2 phase boundaries in Ti-47 Al-2X (X = Nb, Cr, V) intermetallics
Journal of Harbin Institute of Technology, vol. 37, no. SUPPL. 1, pp. 129–132, 2005

Calculating for the activity coefficient of components in Ti-47Al-0.5Y alloy
Journal of Harbin Institute of Technology, vol. 37, no. SUPPL. 1, pp. 126–128+140, 2005

Study on microstructure and properties of γ-TiAl/Ti-6Al-4V complex sheet
Journal of Harbin Institute of Technology, vol. 37, no. SUPPL. 1, pp. 185–187, 2005

Influence of yttrium on microstructure, mechanical properties and deformability of Ti-43Al-9V alloy
Intermetallics, vol. 13, no. 3-4, pp. 263–266, 2005

Numerical simulation of induction skull melting process for titanium-aluminium base alloy
Acta Metallurgica Sinica (English Letters), vol. 17, no. 6, pp. 928–933, 2004

Mechanisms of improvement of high temperature deformability of Ti-43Al-9V-0.3Y alloy with addition of Y
Journal of Rare Earths, vol. 22, no. SUPPL. 4, pp. 150–153, 2004

Composition control in induction skull melting of Ti-22Al-25Nb alloy
Foundry Technology, vol. 25, no. 11, pp. 834, 2004

Developments in TiAl based intermetallics research
Material Science and Technology, vol. 11, no. 4, pp. 441–444, 2003

Electron structure of γ/α2 phase boundaries in TiAl based alloys
Journal of Materials Science and Technology, vol. 19, no. SUPPL., pp. 85–87, 2003

Analysis of valence electron structure of TiAl-X intermetallics
Rare Metal Materials and Engineering, vol. 32, no. 11, pp. 898, 2003

Thermodynamic parameter calculation and evaporation behavior of elements in Ti-Al-V alloys
Transactions of Nonferrous Metals Society of China (English Edition), vol. 13, no. SPEC. ISS., pp. 119–123, 2003

Grain and lamellar refinement in TiAl based alloy by yttrium addition
Transactions of Nonferrous Metals Society of China (English Edition), vol. 13, no. SPEC. ISS., pp. 133–135, 2003

Microstructure of hot-pack rolled Ti-43Al-9V-0. 3Y alloy
Transactions of Nonferrous Metals Society of China (English Edition), vol. 13, no. SPEC. ISS., pp. 170–173, 2003

Effect of rare earth on microstructure of γ-TiAl intermetallics
Journal of Rare Earths, vol. 21, no. 2, pp. 163–166, 2003

Methods of improving room temperature ductility of TiAl based alloys
Rare Metal Materials and Engineering, vol. 32, no. 2, pp. 81–86, 2003

Research on TiAl based alloys materials and precision forming
Acta Metallurgica Sinica, vol. 38, no. 11, pp. 1141–1148, 2002

Recent development in engineering γ-TiAl intermetallics
Transactions of Nonferrous Metals Society of China (English Edition), vol. 12, no. 4, pp. 605–609, 2002

发明专利
在钛基材料及其金属间化合物的材料和加工成形技术领域授权国家发明专利30余项。

CURRICULUM VITAE
Fantao Kong Ph.D.Professor School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001, China

Tel/Fax: +86 **

E-mail: kft@hit.edu.cn

Web:http://homepage.hit.edu.cn/pages/ftkong

http://www.researcherid.com/rid/F-4929-2014

http://www.researchgate.net/profile/Fantao_Kong2

---

Education

2000–2003Harbin Institute of Technology,Ph.D

1998–2000Harbin Institute of Technology,Master of Engineering

1990–1994Harbin Institute of Technology,Bachelor of Engineering

Experience

2013–PresentProfessor,Harbin Institute of Technology, China.

2005–2013 Associate Professor,Harbin Institute of Technology, China.

2009–2010 Research Fellow,The University of Waikato, New Zealand.

2003–2005 Post-doctoral researcher,Harbin Institute of Technology, China.

2003–2005 Lecturer,Harbin Institute of Technology, China.

---

Awards

The First Prize Award for the research Project “Fundamental study of physical metallurgy of novel Ti-based alloys”, awarded by Heilongjiang Province, China (2012)

The Second Prize Award for the research Project “Solidification process and microstructure control of light metals and their composites”, awarded by Heilongjiang Province, China (2006)

---

Publications

He has published more than 170 technical papers, including over 150 journal publications.