基本信息
在功能梯度材料前沿领域研究基础上，相继开展了第一性原理、分子动力学、相场、蒙特卡洛与元胞自动机及材料信息学相关研究，基于材料基因工程研发成功一系列关键工程材料及其热处理改性技术，如热强耐蚀钢、低密度高温合金、低膨胀高温合金、匀相转变纳米化合金热处理技术、低合金高强钢非完全淬火超强韧化热处理技术、钛合金三态组织热处理技术、铝合金大型构件热处理数值模拟与变形控制技术、材料工艺-组织-性能关系模型与工艺反向优化技术等。承担国防“973”项目专题、国防基础科研和总装预研项目10余项、国家级重点实验室基金项目5项、校创新基金项目1项，承担校企合作项目16项。先后获省部级二等奖2项，省高校科技奖励2项；申请国家发明专利14项，授权7项。发表学术论文200余篇，SCI、EI收录100余篇次。出版专著/教材2部。
社会兼职
黑龙江省金属学会副理事长
黑龙江省新材料产业专家委员会委员
中国金属学会高级会员
工作经历
时间工作经历
1982年-1988年湖北省国营9616厂助理工程师
1994年-1996年
原哈尔滨建筑大学力学博士后流动站工作
1996年-1997年韩国机械研究院访问学者
1997年-2001年哈尔滨工业大学材料学院副教授
2001年-2002年哈尔滨工业大学材料学院教授
2002年-目前哈尔滨工业大学材料学院博士生导师
教育经历
1978年-1982年：毕业于重庆大学金属学及热处理专业获学士学位1988年-1991年：毕业于哈尔滨工业大学金属材料及热处理专业获硕士学位1991年-1994年：毕业于哈尔滨工业大学金属材料及热处理专业获博士学位
荣誉称号
2011年被评为中国金属学会“优秀学会工作者”；
2012年度荣获黑龙江省教育厅授予的“黑龙江省高校师德先进个人”。
我的新闻
新闻标题我院王铀、朱景川参加2010中国（宁波）新材料与产业化国际论坛
发表时间2012-06-20
http://today.hit.edu.cn/articles/2010/12-09/**.htm
新闻标题我院朱景川教授一行访问北满特钢
发表时间2012-06-20
http://today.hit.edu.cn/articles/2011/04-22/**.htm
新闻标题中试转化“铺路”行业标准“护航”——访哈尔滨工业大学材料科学与工程学院教授朱景川
发表时间2012-06-20
http://epaper.hljnews.cn/hljrb/html/2009-12/25/content_471495.htm
新闻标题关于召开2012年全国新型金属材料学术交流研讨会征文通知
发表时间2012-06-20
http://www.ljjs.com.cn/showcontent.asp?id=62072
新闻标题黑龙江省金属学会八届二次理事（扩大）会议在哈尔滨召开
发表时间2013-04-09
http://www.ljjs.com.cn/showcontent.asp?id=71894
新闻标题华士镇与哈工大产学研合作又结硕果
发表时间2013-06-15
http://kjj.jiangyin.gov.cn/jykjj/sitePages/subPages/**80126.html?sourceChannelId=15558&did=195643
新闻标题烟台大学环境与材料工程学院成功举办系列学术讲座
发表时间2015-04-29
http://www.ytu.edu.cn/xsdt/702.jhtml
新闻标题北方工业大学机械学院举办迎校庆学术讲座
发表时间2016-10-14
http://www.ncut.edu.cn/xww/4/**/**0806.html
新闻标题哈工大朱景川教授来攀钢研究院学术讲座
发表时间2016-11-29
http://www.panyan.cn/show.aspx?tag=1&id=F8C153033CEB3EA9
新闻标题山东理工大学材料学院邀请朱景川教授科研讲座
发表时间2017-04-11
http://news.daxues.cn/news/campus/201704/372078.html
新闻标题哈工大朱景川教授一行到攀钢集团钒钛(钢铁)研究院学术交流
发表时间2018-01-03
http://www.panyan.cn/show.aspx?tag=1&id=56A545F29E891426
新闻标题【MSE讲坛】朱景川教授做客MSE讲坛
http://today.hit.edu.cn/news/2018/04-11/**RL0.htm
研究领域
材料学主要研究方向:
梯度功能复合材料设计、制备与应用特种合金相变与热处理
热处理过程数值模拟与工艺优化
材料多尺度计算机模拟
基于材料基因工程的新材料设计
基于材料信息学与人工智能的材料建模与设计
奖项成果
尹钟大，朱景川等. “功能梯度材料的工艺研究”，航天总公司科技进步二等奖，1998.
来忠红，朱景川等.“碳碳复合材料抗氧化涂层原位合成及抗氧化行为”，黑龙江省高校科学技术二等奖，2009.
朱景川，来忠红等. “功能梯度材料的设计、制备与应用”，黑龙江省自然科学二等奖，2010.
专利
一种在双相钛合金中获得三态组织的热处理工艺. 国家发明专利(ZL **9.9)热强耐蚀钢及其制备和热处理方法. 国家发明专利(ZL **1.9)结合有限元法和反传热法计算淬火介质换热系数的方法.国家发明专利(ZL **8.X)一种中碳硅锰低合金钢的高强韧淬火-配分热处理方法. 国家发明专利(CN **7.X)低碳铬硅锰低合金钢的热处理方法. 国家发明专利(CN **0.1)一种中碳硅锰铬镍系低合金钢超高强化热处理的方法. 国家发明专利(CN**7.1)一种中碳硅锰铬镍系低合金钢高强韧化热处理方法. 国家发明专利(ZL **4.0)中碳硅锰铬镍系低合金钢的贝氏体等温热处理方法. 国家发明专利(ZL **0.8)一种中碳锰钒低合金钢强韧化热处理方法. 国家发明专利(CN **5.6)中碳锰钒系低合金钢强韧化二步等温热处理方法. 国家发明专利(CN**9.X)
沉淀硬化不锈钢高强韧非等温热处理工艺. 国家发明专利(ZL **9.6)一种用于压铸模具的高温合金材料及其方法和应用. 国家发明专利(ZL **4.5)一种PH17-4沉淀硬化不锈钢负温度梯度固溶热处理方法. 国家发明专利(CN**5.8)一种沉淀硬化不锈钢PH17-4负温度梯度时效热处理方法. 国家发明专利(CN**3.8)
主讲课程
材料力学性能、44学时、本科生主干课程
计算材料学原理、14+10学时、本科生专题课程
固态相变原理、32学时、硕士生学位课程
材料计算设计基础、32+20学时、硕士生学位课程
材料微观组织模拟与设计、32+20学时、硕士生学位课程
材料科学前沿与进展、4学时、博士生专题课程
教学成果
1. “固态相变原理”研究生课程建设与教学改革，哈尔滨工业大学研究生教学成果一等奖，2011
2. “固态相变原理”研究生学位课程体系与教学实践，2010年黑龙江省高教学会优秀教育科研论文一等奖
3. “材料计算设计基础”研究生学位课程体系设计与教学方法探讨，2010年黑龙江省高教学会优秀教育科研论文二等奖
4. “材料工程专业学位研究生教育实践与培养模式创新”，哈工大研究生培养模式改革与实践成果优秀论文一等奖，2013
招生信息
每年招生
博士：2-3名
硕士：5-7名
专著
朱景川、来忠红. 固态相变原理. 科学出版社，2010年.毛卫民、朱景川、郦剑、龙毅、范群成. 金属材料结构与性能. 清华大学出版社, 2008年
发表论文(动态链接)
orcid.org/0000-0002-6075-2373
ResearcherID:B-3573-2018
发表论文
Liao M, Liu Y, Min L, et al. Alloying effect on phase stability, elastic and thermodynamic properties of Nb-Ti-V-Zr high entropy alloy[J]. Intermetallics, 2018,101:152-164.DOI:https://doi.org/10.1016/j.intermet.2018.08.003.
Paudel R, Zhu J. Correction to: Theoretical Study of Structural, Magnetic, Elastic, Phonon, and Thermodynamic Properties of Heusler Alloys Fe2CrX (X = Al, Ga) (Journal of Superconductivity and Novel Magnetism, (2018), 31, 6, (1791-1798), 10.1007/s10948-017-4397-6)[J]. Journal of Superconductivity and Novel Magnetism, 2018,31(6):1799.DOI:10.1007/s10948-017-4421-x.
Zhou F, Liu Y, Lai Z, et al. Quantum confined two-dimensional electron/hole gas switching by facet orientation of perovskite oxides[J]. RSC Advances, 2018,8(37):20477-20482.DOI:10.1039/C8RA03928C.
Paudel R, Zhu J. Structural, electronic, magnetic, elastic, and thermal properties of Co-based equiatomic quaternary Heusler alloys[J]. Journal of Magnetism and Magnetic Materials, 2018,453:10-16.DOI:10.1016/j.jmmm.2017.12.103.
Paudel R, Zhu J. Theoretical Study of Structural, Magnetic, Elastic, Phonon, and Thermodynamic Properties of Heusler Alloys Fe2CrX (X = Al, Ga)[J]. Journal of Superconductivity and Novel Magnetism, 2018,31(6):1791-1798.DOI:10.1007/s10948-017-4397-6.
Nong Z, Cui P, Zhu J, et al. Alloying effects of V on stability, elastic and electronic properties of TiFe2 via first-principles calculations[J]. Journal of Central South University, 2017,24(7):1551-1559.DOI:10.1007/s11771-017-3560-3.
Nong Z, Zhu J, Zhao R. Prediction of structure and elastic properties of AlCrFeNiTi system high entropy alloys[J]. Intermetallics, 2017,86:134-146.DOI:10.1016/j.intermet.2017.03.014.
Jong J Y, Yan J, Zhu J, et al. Stability and Elastic, Electronic, and Thermodynamic Properties of Fe2TiSi1-xSnxCompounds[J]. Journal of Electronic Materials, 2017,46(10):6038-6044.DOI: 10.1007/s11664-017-5564-z.
Jong J Y, Zhu J, Jon M G, et al. Theoretical investigation of stabilities and physical properties of low cost Fe-based full-Heusler materials[J]. Journal of Alloys and Compounds, 2017,693:462-467.DOI:10.1016/j.jallcom.2016.09.216.
Zhao R, Wu F, Liu X, et al. First-principles study of Mn alloying into Fe 3 AlC: Towards the improvement of ductility[J]. Journal of Alloys and Compounds, 2016,681:283-292.DOI:10.1016/j.jallcom.2016.03.269.
Cao Y, Zhu P, Zhu J, et al. First-principles study of NiAl alloyed with Co[J]. Computational Materials Science, 2016,111:34-40.DOI:10.1016/j.commatsci.2015.08.053.
Lai Z, Zhou F, Chen H, et al. Nanosilver seeds growth of uniform urchin-like ZnO particles[J]. Chemistry Letters, 2016,45(12):1467-1468.DOI:10.1246/cl.160744.
Li H, Cao Y, Zhou S, et al. Site preferences and effects of X (X = Mn, Fe, Co, Cu) on the properties of NiAl: A first-principles study[J]. Modern Physics Letters B, 2016,30(09):**.DOI:10.1142/S**1335.
Jong J, Zhu J, Pak S, et al. Theoretical Investigation of Mechanical, Electronic, and Thermal Properties of Fe2TiSi and Fe2TiSn Under Pressure[J]. Journal of Electronic Materials, 2016,45(10):5104-5111.DOI:10.1007/s11664-016-4722-z.
Liu Y, Zhu J C, Zhou Y, et al. Austenization dynamics of 17-4PH steel during continuous heating process[J]. Journal of Iron and Steel Research, 2015,27(10):63-66.DOI:10.13228/j.boyuan.issn1001-0963.**.
YANG X, ZHU J, LI W. CFD-supported optimization of flow distribution in quench tank for heat treatment of A357 alloy large complicated components[J]. Transactions of Nonferrous Metals Society of China, 2015,25(10):3399-3409.DOI:10.1016/S1003-6326(15)63975-9.
Yang X W, Zhu J C, Li W Y. Constitutive behaviour in as quenched Al–5Cu–0·4Mn alloy during hot deformation[J]. Materials Science and Technology, 2015,31(11):1320-1328.DOI:10.1179/**Y.**.
Nong Z S, Zhu J C, Lai Z H, et al. Structure and stability of as cast AlCrFeMnNiTi high entropy alloy[J]. Materials Science and Technology, 2015,31(10):1153-1158.DOI:10.1179/**Y.**.
He D, Zhu J, Zaefferer S, et al. Effect of retained beta layer on slip transmission in Ti–6Al–2Zr–1Mo–1V near alpha titanium alloy during tensile deformation at room temperature[J]. Materials & Design (1980-2015), 2014,56:937-942.DOI:10.1016/j.matdes.2013.12.018.
Hou L, Wu R, Yu H, et al. Effects of conventional heat treatment on oxygen-rich ? layer and mechanical properties of TC4 alloy[J]. Heat Treatment of Metals, 2014,39(3):65-68.DOI:10.13251/j.issn.0254-6051.2014.03.015.
Nong Z, Zhu J, Yang X, et al. First-principles calculations of the stability and hydrogen storage behavior of C14 Laves phase compound TiCrMn[J]. Solid State Sciences, 2014,32:1-7.DOI:10.1016/j.solidstatesciences.2014.03.007.
Nong Z, Zhu J, Yang X, et al. First-principles study of hydrogen storage and diffusion in B2 FeTi alloy[J]. Computational Materials Science, 2014,81:517-523.DOI:10.1016/j.commatsci.2013.08.060.
Zhao R D, Wu F F, Lai Z H, et al. Microstructure and property of near ZLA357 Al-Si alloy[J]. Transactions of Materials and Heat Treatment, 2014,35:46-49.DOI:10.13289/j.issn.1009-6264.2014.s2.010.
Yang X, Li W, Zhu J, et al. Numerical study of residual stresses and distortion in quenched large complicated thin-wall A357 aluminum alloy workpieces[J]. Thermal Process Modeling - Proceedings from the 5th International Conference on Thermal Process Modeling and Computer Simulation, ICTPMCS 2014, 2014:156-162.
Luo L, Zhu J, Liu Y, et al. Relationship Prediction between the Thickness of Oxygen-enriched alpha Layer, Thermal Exposure Temperature and Holding Time for TC6 Titanium Alloy Based on BP Neural Network[J]. RARE METAL MATERIALS AND ENGINEERING, 2014,43(4):946-950.
Nong Z S, Zhu J C, Cao Y, et al. Stability and structure prediction of cubic phase in as cast high entropy alloys[J]. Materials Science and Technology, 2014,30(3):363-369.DOI:10.1179/**Y.**.
Zhou F, Zhu J, Lai Z, et al. Surface plasmon resonances behavior in visible light of non-metal perovskite oxides AgNbO3[J]. Applied Physics Letters, 2014,105(23):231121.DOI:10.1063/1.**.
Nong Z, Zhu J, Cao Y, et al. A first-principles study on the structural, elastic and electronic properties of the C14 Laves phase compounds TiX2 (X=Cr, Mn, Fe)[J]. Physica B: Condensed Matter, 2013,419:11-18.DOI:10.1016/j.physb.2013.03.012.
He D, Zhu J C, Lai Z H, et al. An experimental study of deformation mechanism and microstructure evolution during hot deformation of Ti–6Al–2Zr–1Mo–1V alloy[J]. Materials & Design, 2013,46:38-48.DOI:10.1016/j.matdes.2012.09.045.
NONG Z, ZHU J, CAO Y, et al. CALCULATIONS OF SELF-DIFFUSION PROCESS AND COEFFICIENT IN ORDERED B2AlCo[J]. Modern Physics Letters B, 2013,27(19):**.DOI:10.1142/S**0340.
YANG X, ZHU J, NONG Z, et al. CONSTITUTIVE BEHAVIOR OF AS-QUENCHEDAl-Cu-MnALLOY[J]. Modern Physics Letters B, 2013,27(19):**.DOI:10.1142/S**0364.
Zhu J, He D, Yang X, et al. EBSD study on dual heat treatment and microstructure evolution of TA15 titanium alloy[J]. Rare Metal Materials and Engineering, 2013,42(2):382-386.
Lai Z H, Fang H T, Zuo X, et al. Effect of Al content in an Al/Si layer on the oxidation behavior of the Mo/Si-Al/Si double-layer coated C/C composites at 1370?C[J]. New Carbon Materials, 2013,28(3):222-227.DOI:10.1016/j.carbon.2013.06.061.
Zhao R, Zhu J, Liu Y, et al. Effect of elastic interaction energy on the spinodal decomposition and later coarsening stage in fe-20%mo alloys[J]. Reviews on Advanced Materials Science, 2013,33(5):429-435.
Nong Z, Zhu J, Yang X, et al. Effects of annealing on microstructure, mechanical and electrical properties of AlCrCuFeMnTi high entropy alloy[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013,28(6):1196-1200.DOI:10.1007/s11595-013-0844-9.
Hou L, Li Y, Liu Y, et al. Effects of heat treatment on the formation of oxygen-rich ? layer in TC6 alloy[J]. Heat Treatment of Metals, 2013,38(2):70-73.DOI:10.13251/j.issn.0254-6051.2013.02.019.
Lai Z, Ma J, Zhu J, et al. Fabrication and thermoelectric properties of TiFeSb system half-heusler compounds[J]. Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2013,42(8):1742-1745.
Lai Z, Ma J, Zhu J, et al. Fabrication and Thermoelectric Properties of TiFeSb System Half-Heusler Compounds[J]. RARE METAL MATERIALS AND ENGINEERING, 2013,42(8):1742-1745.
Yang X, Zhu J, Nong Z, et al. FEM simulation of quenching process in A357 aluminum alloy cylindrical bars and reduction of quench residual stress through cold stretching process[J]. Computational Materials Science, 2013,69:396-413.DOI:10.1016/j.commatsci.2012.11.024.
YANG X, ZHU J, LAI Z, et al. Finite element analysis of quenching temperature field, residual stress and distortion in A357 aluminum alloy large complicated thin-wall workpieces[J]. Transactions of Nonferrous Metals Society of China, 2013,23(6):1751-1760.DOI:10.1016/S1003-6326(13)62657-6.
Cao Y, Zhu J, Liu Y, et al. First-principles studies of the structural, elastic, electronic and thermal properties of ??-Ni
Cao Y, Zhu J, Nong Z, et al. First-principles studies of the structural, elastic, electronic and thermal properties of Ni3Nb[J]. Computational Materials Science, 2013,77:208-213.DOI:10.1016/j.commatsci.2013.04.022.
Cao Y, Zhu J, Liu Y, et al. First-principles studies of the structural, elastic, electronic and thermal properties of Ni3Si[J]. Computational Materials Science, 2013,69:40-45.DOI:10.1016/j.commatsci.2012.11.037.
Cao Y, Zhu J, Liu Y, et al. First-principles studies of the structural, elastic, electronic and thermal properties of γ′-Ni 3 Ti[J]. Physica B: Condensed Matter, 2013,412:45-49.DOI:10.1016/j.physb.2012.12.020.
Lai Z H, Ma J, Zhu J C. First-principles study on Mn-doped TiFeSb half-heusler thermoelectric materials[J]. Materials Science Forum, 2013,762:471-475.DOI:10.4028/www.scientific.net/MSF.762.471.
Zhao R, Lai Z, You F, et al. Homogenous transformation behavior of Fe-23Al alloy during solid solution cooling process[J]. Heat Treatment of Metals, 2013,38(1):21-23.DOI:10.13251/j.issn.0254-6051.2013.01.006.
Liu Y, Zhu J, Wang H, et al. Microstructure and mechanical properties of Fe-24Al-1Cr alloy treated by solid solution and aging treatment[J]. Heat Treatment of Metals, 2013,38(1):84-87.DOI:10.13251/j.issn.0254-6051.2013.01.024.
Cheng J, Shan S, Weng L, et al. Molecular Dynamics Investigation of Nanotube Diameter and Wall Thickness of Cyclic Hexa-, Octa-, Deca- and Dodeca-Peptide[J]. Journal of Computational and Theoretical Nanoscience, 2013,10(6):1335-1337.DOI:10.1166/jctn.2013.2851.
YANG X, ZHU J, HE D, et al. Optimum design of flow distribution in quenching tank for heat treatment of A357 aluminum alloy large complicated thin-wall workpieces by CFD simulation and ANN approach[J]. Transactions of Nonferrous Metals Society of China, 2013,23(5):1442-1451.DOI:10.1016/S1003-6326(13)62615-1.
Zhu J, Nong Z, Lai Z, et al. Prediction of composition-strength of as-cast high entropy alloys using artificial neural network[J]. Heat Treatment of Metals, 2013,38(2).DOI:10.13251/j.issn.0254-6051.2013.02.010.
YANG X, ZHU J, NONG Z, et al. Prediction of mechanical properties of A357 alloy using artificial neural network[J]. Transactions of Nonferrous Metals Society of China, 2013,23(3):788-795.DOI:10.1016/S1003-6326(13)62530-3.
HE D, ZHU J, LAI Z, et al. Residual elastic stress–strain field and geometrically necessary dislocation density distribution around nano-indentation in TA15 titanium alloy[J]. Transactions of Nonferrous Metals Society of China, 2013,23(1):7-13.DOI:10.1016/S1003-6326(13)62422-X.
Lai Z H, Li F, Zhao R D, et al. The microstructural evolution of the coexistence of spinodal decomposition and ordering in FE-23AL alloy during aging[J]. Engineering Review, 2013,33(3):173-178.
CAO Y, ZHU J, LIU Y, et al. THERMODYNAMIC PROPERTIES OFMC(M=V,Nb,Ta): FIRST-PRINCIPLES CALCULATIONS[J]. Modern Physics Letters B, 2013,27(19):**.DOI:10.1142/S**0352.
Yang X W, Zhu J C, Lai Z H, et al. Application of artificial neural network to predict flow stress of as quenched A357 alloy[J]. Materials Science and Technology, 2013,28(2):151-155.DOI:10.1179/**Y.**.
NONG Z, ZHU J, YU H, et al. First principles calculation of intermetallic compounds in FeTiCoNiVCrMnCuAl system high entropy alloy[J]. Transactions of Nonferrous Metals Society of China, 2012,22(6):1437-1444.DOI:10.1016/S1003-6326(11)61338-1.
Nong Z, Zhu J, Yang X, et al. First-principles investigation of the elastic and electronic properties of the binary intermetallics in the Al–La alloy system[J]. Physica B: Condensed Matter, 2012,407(24):4706-4711.DOI:10.1016/j.physb.2012.09.017.
Zhao R, Zhu J, Liu Y, et al. First-principles study of FeAl(B2) microalloyed with La, Ac, Sc and Y[J]. ACTA PHYSICA SINICA, 2012,61(**).
Yang X W, Lai Z H, Zhu J C, et al. Hot compressive deformation behavior of the as-quenched A357 aluminum alloy[J]. Materials Science and Engineering: B, 2012,177(19):1721-1725.DOI:10.1016/j.mseb.2012.02.020.
He D, Zhu J C, Zaefferer S, et al. Influences of deformation strain, strain rate and cooling rate on the Burgers orientation relationship and variants morphology during ??? phase transformation in a near ? titanium alloy[J]. Materials Science and Engineering A, 2012,549:20-29.DOI:10.1016/j.msea.2012.03.110.
He D, Zhu J C, Zaefferer S, et al. Influences of deformation strain, strain rate and cooling rate on the Burgers orientation relationship and variants morphology during β→α phase transformation in a near α titanium alloy[J]. Materials Science and Engineering: A, 2012,549:20-29.DOI:10.1016/j.msea.2012.03.110.
Zhao R, Zhu J, Lai Z, et al. Microscopic Phase Field Investigation of Homogenous Transformation Kinetics in Fe-Al Induced by Inhomogenous Elastic Energy[J]. RARE METAL MATERIALS AND ENGINEERING, 2012,412:206-209.
Lai Z, Meng S, Zhu J, et al. Microstructure Characterization of Mo–Si–C–N Anti-Oxidation Coatings on C/C Composites[J]. Journal of Computational and Theoretical Nanoscience, 2012,9(9):1329-1332.DOI:10.1166/jctn.2012.2196.
Zhao R, Lai Z, Li F, et al. Ordered Domain Characterization and Formation Mechanism of Fe-23Al Alloys[J]. RARE METAL MATERIALS AND ENGINEERING, 2012,412:628-631.
Liu Y, Zhu J, Li F, et al. Studies of the Co-Existence of Spinodal Decomposition and Ordering in Fe-Al Alloy Using Internal Friction Method[J]. RARE METAL MATERIALS AND ENGINEERING, 2012,412:194-196.
Dong H, Zhu J C, Lai Z H, et al. Study of fcc metal tension behaviour by crystal plasticity finite element method[J]. Materials Science and Technology, 2013,28(7):788-793.DOI:10.1179/**Y.**.
Nong Z, Zhu J, Yang X, et al. The mechanical, thermodynamic and electronic properties of Al3Nb with DO22 structure: A first-principles study[J]. Physica B: Condensed Matter, 2012,407(17):3555-3560.DOI:10.1016/j.physb.2012.05.023.
Zhao R, Zhu J, Liu Y, et al. The phase field investigation of B2 (FeAl) phase antisite defect during homogenous transformation of Fe–24Al alloy[J]. Journal of Materials Science, 2012,47(7):3376-3382.DOI:10.1007/s10853-011-6181-5.
He D, Zaefferer S, Zhu J, et al. Three-Dimensional Morphological and Crystallographic Investigation of Lamellar Alpha and Retained Beta in a Near Alpha Titanium Alloy by Combination of Focused Ion Beam and Electron Backscattering Diffraction[J]. steel research international, 2012,83(5):496-500.DOI:10.1002/srin.**.
Nong Z, Li D, Zhu J, et al. Effect of Aluminum Content on Microstructure and Wear Resistance of CuCrFeMnTiAlx High-Entropy Alloy[J]. RARE METAL MATERIALS AND ENGINEERING, 2011,402:550-554.
Zhao R, Li D, Zhu J, et al. Effect of Heat Treatment on Microstructure and Property of 12Ni Co-Free Maraging Steel[J]. RARE METAL MATERIALS AND ENGINEERING, 2011,402:560-563.
Liu Y, Zhu J, Yue Y, et al. Effects of strain rate on dislocation for TA15 alloy during hot compressive deformation[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011,26(2):186-189.DOI:10.1007/s11595-011-0194-4.
Yang X W, Zhu J C, Lai Z H, et al. Fractal studies on primary phase morphology of TA15 titanium alloy after hot compressive deformation[J]. Journal of Shanghai Jiaotong University (Science), 2011,16(3):343-346.DOI:10.1007/s12204-011-1157-9.
Yang X, Zhu J, Lai Z, et al. Metal behavior of hot extrusion deformation and microstructural analysis of TA15 titanium alloy[J]. Rare Metal Materials and Engineering, 2011,40(5):797-801.
Yang X, Zhu J, Lai Z, et al. Metal Behavior of Hot Extrusion Deformation and Microstructural Analysis of TA15 Titanium Alloy[J]. RARE METAL MATERIALS AND ENGINEERING, 2011,40(5):797-801.
Liu Z W, Huang H Y, Gao X X, et al. Microstructure and property evolution of isotropic and anisotropic NdFeB magnets fabricated from nanocrystalline ribbons by spark plasma sintering and hot deformation[J]. Journal of Physics D: Applied Physics, 2011,44(2):25003.DOI:10.1088/0022-3727/44/2/025003.
Cao Y, Li D S, Zhu J C, et al. Prediction of aging process-hardness of maraging steel based on BP neural network[J]. Heat Treatment of Metals, 2011,36(11):107-110.DOI:10.13251/j.issn.0254-6051.2011.11.009.
Liu H, Zhu J, Lai Z, et al. A first-principles study on structural and electronic properties of Mo2C[J]. Scripta Materialia, 2009,60(11):949-952.DOI:10.1016/j.scriptamat.2009.02.010.
HE D, ZHU J C, WANG Y, et al. A STUDY OF DYNAMIC RECRYSTALLIZATION IN TA15 TITANIUM ALLOY DURING HOT DEFORMATION BY CELLULAR AUTOMATA MODEL[J]. International Journal of Modern Physics B, 2009,23(06n07):934-939.DOI:10.1142/S**0269.
Zhu J, Zhao R, Jiang C, et al. Effect of aging temperature on modulated structures of 00Ni12Cr5Mo3TiAlV maraging steel[J]. Materials Science and Engineering A, 2009,516(1-2):201-204.DOI:10.1016/j.msea.2009.03.033.
Liu Y, Zhu J, Wang Y. Effects of annealing heat treatment on grain boundary orientation differential evolution of TA15 alloy[J]. Rare Metal Materials and Engineering, 2009,38(8):1390-1393.
Zhao R D, Zhu J C, Jiang C W, et al. Effects of grain refining on microstructure and properties of Fe-Ni-Mo-Cr maraging steel[J]. Heat Treatment of Metals, 2009,34(7):27-30.DOI:10.13251/j.issn.0254-6051.2009.07.027.
Liu Y, Zhu J C, Wang Y. Grain boundary characteristic distribution during hot extrusion for TA15 alloy[J]. Transactions of Materials and Heat Treatment, 2009,30(2):39-43.
Liu H L, Zhu J C, Lai Z H, et al. Heat treatment of a new type of thermal strengthening and corrosion resistance steel Fe-Cr-Mo-V[J]. Heat Treatment of Metals, 2009,34(7):24-26.DOI:10.13251/j.issn.0254-6051.2009.07.014.
Lai Z, Meng S, Zhu J, et al. Microstructure of a Mo-Si-C-N multi-layered anti-oxidation coating on carbon/carbon composites by fused slurry[J]. Rare Metals, 2009,28(5):460-464.DOI:10.1007/s12598-009-0089-0.
Lai Z H, Zhu J C, Jeon J H, et al. Phase constitutions of Mo Si N anti-oxidation multi-layer coatings on C C composites by fused slurry[J]. Materials Science and Engineering A, 2009,499(1):267-270.DOI:10.1016/j.msea.2007.11.138.
Zhu J C, Yue Y, Wang Y, et al. Prediction of processing-microstructure of TA15 titanium alloy using artificial neural network[J]. Chinese Journal of Nonferrous Metals, 2009,19(4):649-655.DOI:10.19476/j.ysxb.1004.0609.2009.04.009.
Yue Y, Zhu J, Liu Y, et al. Prediction of processing-properties of TA15 titanium alloy based on BP neural network[J]. Rare Metal Materials and Engineering, 2009,38(10):1811-1814.
Wang Y, Zhu J C, You F H, et al. Processing map of TA15 titanium alloy based on BP neural network[J]. Transactions of Materials and Heat Treatment, 2009,30(2):195-197.
Cheng J, Zhu J, Liu B, et al. Structure of a self-assembled single nanotube of cyclo[(-d-Ala-l-Ala)4-][J]. Molecular Simulation, 2009,35(8):625-630.DOI:10.1080/**87788.
Liu Y, Zhu J, Wang Y, et al. The dislocation sub-structure evolution during hot compressive deformation of Ti-6Al-2Zr-1Mo-1V alloy at 800 ?c[J]. Journal Wuhan University of Technology, Materials Science Edition, 2009,24(2):202-205.DOI:10.1007/s11595-009-2202-5.
Liu H, Zhu J, Liu Y, et al. First-principles study on the mechanical properties of vanadium carbides VC and V4C3[J]. Materials Letters, 2008,62(17-18):3084-3086.DOI:10.1016/j.matlet.2008.01.136.
Zhu J, Cheng J, Liao Z, et al. Investigation of structures and properties of cyclic peptide nanotubes by experiment and molecular dynamics[J]. J Comput Aided Mol Des, 2008,22(11):773-781.DOI:10.1007/s10822-008-9212-9.
Liu Y, Zhu J, Wang Y, et al. Research on dislocations for hot compressively deformed TA15 alloy by X-ray diffraction method and a profile analysis theory[J]. Rare Metal Materials and Engineering, 2008,37(9):1505-1509.
Lai Z H, Zhu J C, Jeon J H, et al. Effect of heat-treatment on the oxidation resistance of Mo-Si-N coating for C/C composites[J]. Transactions of Materials and Heat Treatment, 2007,28(SUPPL.):150-153.
Zhu J C, Wang Y, You F H, et al. Microstructure and mechanical properties of thermal deformed TA15 titanium alloy[J]. Transactions of Materials and Heat Treatment, 2007,28(SUPPL.):106-109.
Cheng J, Zhu J, Liu B. Molecular modeling investigation of adsorption of self-assembled peptide nanotube of cyclo-[(1R,3S)-?-Acc-d-Phe]3in CHCl3[J]. Chemical Physics, 2007,333(2-3):105-111.DOI:10.1016/j.chemphys.2007.01.014.
Cheng J, Zhu J, Liu B. Molecular modeling of the dimers from cyclo-[(1R,3S)-?-Acc-D-Phe]3[J]. Key Engineering Materials, 2007,353-358(PART 3):2244-2247.DOI:10.4028/www.scientific.net/KEM.353-358.2244.
Lai Z H, Jeon J H, Zhu J C, et al. Mo-Si-C-N multi-layer anti-oxidation coating on C/C composites[J]. Key Engineering Materials, 2007,353-358(PART 3):1899-1902.DOI:10.4028/www.scientific.net/KEM.353-358.1899.
Zhu J C, Wang Y, Lai Z H, et al. Quantitative characterization of microstructure of thermal deformed TA15 titanium alloy by EBSD[J]. Key Engineering Materials, 2007,353-358(PART 1):549-552.DOI:10.4028/www.scientific.net/KEM.353-358.549.
Zhu J, Cheng J, Liu B. Self-assembly effects of cyclic peptide dimers: Molecular modeling study[J]. Key Engineering Materials, 2007,353-358(PART 3):2257-2260.DOI:10.4028/www.scientific.net/KEM.353-358.2257.
Liu Y, Zhu J C. The effects of microstructure on stress relaxation behavior of BT20 Ti alloy[J]. Transactions of Materials and Heat Treatment, 2007,28(SUPPL.):76-78.
Cheng H R, Zhu J C, Jeon J H, et al. Effect of doping B2O3 on cell parameters and transition temperature of Ba1-xSrxTiO3 ceramics[J]. Journal of Inorganic Materials, 2006,21(3):619-626.
Chu C, Xue X, Zhu J, et al. Fabrication and characterization of titanium-matrix composite with 20 vol% hydroxyapatite for use as heavy load-bearing hard tissue replacement[J]. J Mater Sci Mater Med, 2006,17(3):245-251.DOI:10.1007/s10856-006-7310-6.
Tan C L, Cai W, Zhu J C. First-principles study on elastic properties and electronic structures of Ti-based binary and ternary shape memory alloys[J]. Chinese Physics Letters, 2006,23(10):2863-2866.
Tan C, Cai W, Zhu J. First-principles study on the elastic properties and electronic structure of TiNi-based ternary shape memory alloys[J]. Physica Status Solidi b-BASIC SOLID STATE PHYSICS, 2006,243(11).DOI:10.1002/pssb.**.
Chu C L, Xue X Y, Zhu J C, et al. In vivo study on biocompatibility and bonding strength of hydroxyapatite-20vol%Ti composite with bone tissues in the rabbit[J]. Bio-medical materials and engineering, 2006,16(3):203.DOI:10.1016/j.msea.2006.03.099.
Chu C, Xue X, Zhu J, et al. In vivo study on biocompatibility and bonding strength of Ti/Ti-20 vol.% HA/Ti-40 vol.% HA functionally graded biomaterial with bone tissues in the rabbit[J]. Materials Science and Engineering A, 2006,429(1-2):18-24.DOI:10.1016/j.msea.2006.03.099.
Cheng H R, Zhu J C, Jeon J H, et al. Effect of sintering process on dielectric properties of B2O3-doped graded ceramics[J]. Journal of Inorganic Materials, 2005,20(5):1145-1152.
Lai Z, Zhu J, Jeon J, et al. Fabricate of Mo-Si-N anti-oxidation coating for C/C composites[J]. Rare Metal Materials and Engineering, 2005,34(11):1794-1797.
Cheng H R, Zhu J C, Wu S Y, et al. Fabrication and sintering densification behavior of (Sr1_xPbx) TiO3 nano-powder[J]. Material Science and Technology, 2005,13(1):108-112.
Wang Y, Zhu J C, Lai Z H, et al. Hot compressive deformation behaviour and microstructural variation of TA15 titanium alloy[J]. Materials Science and Technology, 2005,21(12):1466-1470.DOI:10.1179/**X71756.
Liu Y, Yin Z D, Zhu J C, et al. Influence of processing factors on stress relaxation behavior of TC4 alloy[J]. Journal of Materials Engineering, 2005(4):38-41.
Lai Z H, Zhu J C, Jeon J H, et al. Optimum compositions of Si3N4-MoSi2/Si-SiC anti-oxidation coating for C/C composites[J]. Material Science and Technology, 2005,13(5):462-465.
Liu Y, Zhu J, Yin Z. Stress relaxation behavior and related mechanism of Ti-6Al-4V alloy with Widmanstatten microstructure[J]. Rare Metal Materials and Engineering, 2005,34(11):1766-1769.
Li M, Yin Z, Zhu J. An investigation on the properties of ZrO2 suspensions[J]. Powder Metallurgy Technology, 2004,22(3):142-146.DOI:10.19591/j.cnki.cn11-1974/tf.2004.03.004.
Zhu J C, Cheng H R, Wu S Y, et al. Constitutional design and dielectric properties of BST graded ceramics[J]. Transactions of Materials and Heat Treatment, 2004,25(5):130-133.
Cheng H R, Zhu J C, Jeon J H, et al. Densification and dielectric property of B2O3-doped Ba1-xSrxTiO3 graded ceramics[J]. Journal of Inorganic Materials, 2004,19(5):1018-1024.
Liu Y, Zhu J, Yin Z, et al. Effect of triple annealing treatment on stress relaxation of Ti-6Al-4V alloy[J]. Journal of Materials Science and Technology, 2004,20(3):292-294.
Chu C, Xue X, Zhu J, et al. Mechanical and biological properties of hydroxyapatite reinforced with 40 vol. %titanium particles for use as hard tissue replacement[J]. Journal of Materials Science: Materials in Medicine, 2004,15(6):665-670.DOI:10.1023/B:JMSM.**.16887.f2.
Chu C L, Lin P H, Dong Y S, et al. Microstructure of titanium component in hydroxyapatite-Ti asymmetrical functionally graded biomaterial[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2004,14(1):25-28.
Li M, Zeng G, Zhu J, et al. Processing of ZrO2-MoSi2/Ni-Si-Mo FGM by dip-coating[J]. Powder Metallurgy Technology, 2004,22(5):284-288.DOI:10.19591/j.cnki.cn11-1974/tf.2004.05.006.
Li M, Yin Z, Zhu J. Analyses of residual thermal microstresses of ZrO2/Ni FGM[J]. Rare Metal Materials and Engineering, 2003,32(4):255-257.
Liu Y, Zhu J, Yin Z. Bending stress relaxation behavior of as-quenched in ? and aged Ti-6Al-4V alloy[J]. Rare Metal Materials and Engineering, 2003,32(10).
Zhu J, Chu C, Yin Z. Bonding strength of hydroxyapatite/Ti FGM implant to bone[J]. Rare Metal Materials and Engineering, 2003,32(6).
Zhu J, Wu S, Cheng H, et al. Characterization of (Ba,Sr)TiO3 functionally graded dielectric ceramics fabricated from chemical coprecipitated nano-particles[J]. Materials Science Forum, 2003,423-425:417-422.DOI:10.4028/www.scientific.net/MSF.423-425.417.
Liu Y, Yin Z, Zhu J, et al. Effect of microstructure on stress relaxation behavior of TC4 alloy[J]. Rare Metal Materials and Engineering, 2003,32(7):514-517.
Liu Y, Yin Z, Zhu J. Effects of temperature, stress and grain size on stress relaxation in the alloy TC4[J]. Rare Metal Materials and Engineering, 2003,32(8).
Li M, Zhu J, Yin Z, et al. Fabrication of ZrO2/Mo-Si/Ni functionally graded material by dip-coating[J]. Journal of Materials Science and Technology, 2003,19(1):63-65.
Jeon J H, Lai Z H, Zhu J C, et al. Microstructure and oxidation resistance of carbon/carbon composites coated with Si3N4-Si/MoSi2-SiC multi-layers by slurry coating and post heat-treatment process[J]. Materials Science Forum, 2003,423-425:223-226.DOI:10.4028/www.scientific.net/MSF.423-425.223.
Chu C, Zhu J, Yin Z, et al. Optimal design and fabrication of hydroxyapatite-Ti asymmetrical functionally graded biomaterial[J]. Materials Science and Engineering A, 2003,348(1-2):244-250.DOI:10.1016/S0921-5093(02)00738-4.
Lai Z H, Zhu J C, Wang L Y, et al. Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites[J]. Material Science and Technology, 2003,11(3):248-250.
Cheng H, Zhu J, Yin Z, et al. Preparation and dielectric property of strontium-lead titanate functionally graded ceramics[J]. Materials Science Forum, 2003,423-425:411-416.DOI:10.4028/www.scientific.net/MSF.423-425.411.
Jiang Y, Yin Z, Zhu J, et al. Quantitative analysis on effect of alloying elements on Ms temperature of maraging stainless steel[J]. Teshugang/Special Steel, 2003,24(6).
Liu Y, Yin Z D, Zhu J C, et al. Stress relaxation behavior of Ti-6Al-4V alloy[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2003,13(4):881-884.
Li M, Zhu J, Yin Z, et al. TG analysis of non-isothermal oxidation behaviors of Ni in PSZ-Ni composites[J]. Rare Metal Materials and Engineering, 2003,32(3):194-196.
Fang H T, Jeon J H, Zhu J C, et al. Inhibition of liquid Si infiltration into carbon-carbon composites by the addition of Al to the Si slurry pre-coating: Mechanism analysis[J]. Carbon, 2002,40(14):2559-2565.DOI:10.1016/S0008-6223(02)00171-9.
Zhu J C, Lai Z H, Wang L Y, et al. Mo-Si compound composites synthesized by in situ reaction[J]. Acta Physico - Chimica Sinica, 2002,18(1):66-69.
Liu Y, Zhu J C, Yin Z D. Phase particle coarsening dynamics and pattern change in Ti-6Al-4V alloy[J]. Heat Treatment of Metals, 2002,27(2).DOI:10.13251/j.issn.0254-6051.2002.02.010.
Fang H T, Zhu J C, Yin Z D, et al. A Si-Mo fused slurry coating for oxidation protection of carbon-carbon composites[J]. Journal of Materials Science Letters, 2001,20(2):175-177.DOI:10.1023/A:**37.
Li M W, Zhu J C, Yin Z D. Analysis of effective thermal conductivity of particle dispersive composites[J]. Journal of Functional Materials, 2001,32(4):397-398.
Chu C L, Yin Z D, Zhu J C, et al. Dislocation substructure in pure titanium fabricated by powder metallurgy with hot pressing at 1100 ?C under a pressure of 20 MPa[J]. Journal of Materials Science Letters, 2001,20(11):1005-1007.DOI:10.1023/A:**95.
Fang H T, Yin Z D, Zhu J C, et al. Effect of Al additive in Si slurry coating on liquid Si infiltration into carbon-carbon composites[J]. Carbon, 2001,39(13):2035-2041.DOI:10.1016/S0008-6223(01)00016-1.
Zhu J, Lai Z, Yin Z, et al. Fabrication of ZrO2-NiCr functionally graded material by powder metallurgy[J]. Materials Chemistry and Physics, 2001,68(1-3):130-135.DOI:10.1016/S0254-0584(00)00355-2.
Chu C L, Yin Z D, Lin P H, et al. Microband substructure in pure titanium fabricated by powder metallurgical process with hot pressing at 1100 ?C under a pressure of 20 MPa[J]. Journal of Materials Science Letters, 2001,20(20):1869-1872.DOI:10.1023/A:**49.
Zhu J, Yin Z, Luo H, et al. New cyclic phase transformation technology for grain refinement of 18Ni maraging steel[J]. Iron and Steel, 2001,36(6):52-55.DOI:10.13228/j.boyuan.issn0449-749x.2001.06.014.
Fang H T, Zhu J C, Yin Z D, et al. Preparation and microstructure of a Si-Mo fused slurry coating on carbon/carbon composites for oxidation protection[J]. Journal of Materials Science and Technology, 2001,17(1):57-58.
Chu C, Zhu J, Yin Z, et al. Structure optimization and properties of hydroxyapatite-Ti symmetrical functionally graded biomaterial[J]. Materials Science and Engineering A, 2001,316(1-2):205-210.DOI:10.1016/S0921-5093(01)01239-4.
Li M W, Zhu J C, Yin Z D, et al. Synthesis of MoSi2 by mechanical alloying[J]. Journal of Materials Science and Technology, 2001,17(1):15-16.
Zhu J C, Lai Z H, Yin Z D, et al. Thermal shock and thermal fatigue behaviors of ZrO2-Ni functionally graded material[J]. Material Science and Technology, 2001,9(4):387-392.
Xiang X, Chen K, Liu Z, et al. Compositional distribution and mechanical properties of plasma sprayed ZrO2-NiCoCrAlY graded coating[J]. Acta Materiae Compositae Sinica, 2000,17(1):89-92.DOI:10.13801/j.cnki.fhclxb.2000.01.020.
Chu C L, Zhu J C, Yin Z D, et al. Hot pressing of hydroxyapatite(HA)-Ti material and stability of HA[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2000,10(4):505-510.
Luo H, Yin Z D, Zhu J C, et al. Influence of grain size on mechanical properties of 18Ni maraging steel[J]. Material Science and Technology, 2000,8(1):59-62.
Lai Z H, Zhu J C, Wang L Y, et al. Strengthening and toughening of MoSi2 and MoSi2-based materials[J]. Material Science and Technology, 2000,8(2):108-112.
Xiang X H, Yin Z D, Zhu J C, et al. Laser remelting treatment of plasma sprayed ZrO2-NiCoCrAIY graded coating[J]. Journal of the Chinese Society of Corrosion and Protection, 1999,19(3):177-178.
Chu C L, Yin Z D, Zhu J C, et al. Microstructure and thermal stress relaxation characteristics of hydroxyapatite-ti functionally graded biomaterial[J]. Journal of Inorganic Materials, 1999,14(5):781-782.
Xiang X, Zhu J, Yin Z, et al. Fabrication and microstructure of ZrO2/NiCrCoAY graded coating by plasma spraying[J]. Surface and Coatings Technology, 1997,88(1-3):66-69.DOI:10.1016/S0257-8972(95)02723-8.
Xiang X, Zhu J, Yin Z, et al. Microstructure of NiCoCrAlY component in plasma sprayed ZrO2/NiCoCrAlY graded coating[J]. Transactions of Nonferrous Metals Society of China (English Edition), 1997,7(1):106-110.
Zhu J C, Yin Z D, Lai Z H. Fabrication and microstructure of ZrO2-Ni Functional Gradient Material by powder metallurgy[J]. Journal of Materials Science, 1996,31(21):5829-5834.DOI:10.1007/BF**.
Zhu J, Yin Z, Mao J, et al. Interface structure of ZrO2-Ni functionally gradient material[J]. Acta Metallurgica Sinica, 1996,32(2).
Zhu J, Yin Z, Lai Z, et al. Microstructure and thermal stress relaxation of ZrO
Zhu J, Yin Z, Lai Z. Microstructure and mechanical properties of ZrO2-Ni functionally gradient material[J]. Journal of Materials Science and Technology, 1994,10(3):188-192.
友情链接
链接名称【朱景川教授专访】走进梯度材料与特种合金课题组
链接地址http://mp.weixin.qq.com/s/hoKR5w7s02Otoovuqfj1TA
团队成员
教师
朱景川教授刘勇 副教授来忠红教授级高工李明伟研究员
博士后
周飞
博士生
林小龙刘丽 周易 Ramesh廖名情 韩天翼 杨丹妮 曲囡
硕士生
敖日格乐江濠鹏张艺馨来乐张利芳徐泓杨进崔普昌李靖宇王子博陈懿川殷琪峰本科生
刘翔宇 王思聪孟宪航李雨桐张岩陈自谦邸雨王萨娜
