基本信息科学研究教育教学论文
基本情况
1990-2000在哈尔滨工业大学获得学士、硕士和博士学位。先进焊接与连接国家重点实验室 教授、博士生导师。

学术兼职
中国焊接学会计算机辅助焊接工程专业委员会副主任；

中国电工学会电焊技术专委会常务委员；

中国焊接学会青委会副主任

《电焊机》编委

《焊管》编委

研究方向
高效化焊接及过程质量控制：

主要研究内容包括：

高效电弧焊技术及工艺；

电弧钎焊技术及工艺；

焊接过程智能控制；

电弧增材制造

科研项目
科研项目：

多元气体窄间隙气保焊。。。。
国家自然科学基金
2018-2021
负责

超声复合
国家自然基金重点
2015-2019
参与

全位置双丝窄间隙GMA熔滴过渡和熔池行为研究
国家自然科学基金，2013-
负责人

超声-MIG
国家自然科学基金，2013-
参与

微量元素对铝/钢异种金属TIG熔钎焊金属间化合物影响机理研究
国家自然科学基金，2009-2011
负责人

超声-TIG电弧复合焊的电弧物理机制及金属熔化行为研究
国家自然科学基金，2010-2012
参与

奖项成果
搅拌摩擦焊作用机理研究
黑龙江省自然科学二等奖，2007焊接自动化
国家科技进步二等奖，2012VPPA焊接
国家科技进步二等奖，2015


出版教材

出版物名称电弧焊基础

作者杨春利，林三宝

出版时间,完成时间2003-02-01

出版社哈尔滨工业大学出版社



出版物名称高效化焊接方法

作者林三宝，范成磊，杨春利

出版时间,完成时间2012-03-01

出版社机械工业出版社



讲授课程
《电弧焊基础》：本科生专业必修课《高效化焊接方法》：本科生专业课


招生信息
硕士招生: 2 人/年
博士招生:1 人/年
--------------------------------------------

近三年发表的论文
2018年度：

序号

论文名称

作者

刊物名称

年,卷,期,页
1

Microstructure and mechanical properties of simulated unaltered coarse grained heat affected zones of 10CrNi3MoV steel by double-sided double arc welding

Kang Peng*, Chunli Yang, Chenglei Fan, Sanbao Lin

Journal of Materials Processing Technology,

2018,251 :225-231
3

Thermal processes, microstructure, and mechanical properties near weld toe in double-sided double gas tungsten arc backing welding joint of 10CrNi3MoV steel

Kang Peng*, Chunli Yang, Chenglei Fan, Sanbao Lin

The International Journal of Advanced Manufacturing Technology

2018, 96, 677–684
7

In situ observation and electron backscattered diffraction analysis of granular bainite in simulated heat-affected zone of high-strength low-alloy steel

Kang Peng*, Chunli Yang, Chenglei Fan, Sanbao Lin

Science and Technology of Welding & Joining

2017, 23(2):1-6.
2

Effect of ultrasonic pattern on weld appearance and droplet transfer in ultrasonic assisted MIG welding process

Chao Chen*, Chenglei Fan,Sanbao Lin, Xiaoyu Cai,Lei Zhou*,Sanfeng Ye*,Chunli Yang

Journal of Manufacturing Processes

2018, 35: 368-372.
5

Feasibility analysis of pulsed ultrasonic for controlling the GMAW process and weld appearance

Chao Chen*, Sanbao Lin, Chenglei Fan, Chunli Yang ,Lei Zhou*

The International Journal of Advanced Manufacturing Technology

2018: 97,（9-12）：3619-3624
6

A new discovery of arc shape in pulsed ultrasonic wave assisted TIG welding

Chao Chen*, Chenglei Fan, Sanbao Lin,Lei Zhou*, Chunli Yang

Physics of Plasmas

2018, 25：080703
4

Optimization of shielding gas composition in narrow gap GMA welding based on response surface methodology.

Cai X Y, Fan C L, Lin S B, Ji X R*, Yang C L

International Journal of Advanced Manufacturing Technology

2018, 95: 2405-2412.
8

Influence of helium content on a ternary-gas-shielded GMA welding process.

Cai X Y, Lin S B, Murphy A B#, Dong B L*, Fan C L, Yang C L.

Welding in the World

2018,62: 973-984.
9

氦弧与氩弧电弧特性对比研究

赵红星, 王国庆#, 宋建岭#, 刘宪力#,周政*, 杨春利

机械工程学报

2018,54(08):137-143.
10

2219铝合金不同气氛下TIG焊焊接接头组织性能

周政*, 王国庆#, 宋建岭#, 赵红星*,杨春利

焊接学报

2018,39(07):47-50+131
11

Numerical Analysis on Stress Evolution During GTA-Additive Manufacturing of Thin-Walled Aluminum Alloys

Zhida Ni*, Bolun Dong*, Sanbao Lin, Chunli Yang, Chenlei Fan, Jianxing Shi*

Journal of Physics: Conference Series. IOP Publishing

2018, 1063(1): 012083.
12

Arc character and droplet transfer of pulsed ultrasonic wave-assisted GMAW

Fan Chenglei; Zhou Lei*; Liu Zeng*; Yang Chunli; Lin Sanbao; Xie Weifeng; Tong He*

International Journal of Advanced Manufacturing Technology

2018,95(5-8):2219-2226
12

超声在电弧焊接中的应用

范成磊,陈琪昊*,林三宝,杨春利.

精密成形工程

2018(1):57-66
13

双丝窄间隙GMAW三元保护气成分对焊缝成形的影响

林三宝，刘硕*，蔡笑宇，季相儒*

焊接

2018（02）:1-4
15

GMAW短路过渡过程的二次引弧现象

陈超*; 范成磊; 林三宝; 杨春利

焊接学报,

2018, (12):9-12
16

Experimental Investigation on Acoustic Control Droplet Transfer in Ultrasonic-Wave-Assisted Gas Metal Arc Welding

Xie Weifeng#; Fan Chenglei; Yang Chunli; Lin Sanbao

Metallurgical and Materials Transactions B

2018, 49(1):274-281
17

Effect of long-term aging on the microstructure and mechanical properties of T23 steel weld metal without post-weld heat treatment

Wang Xue#; Li Yong#; Li Huijun#; Lin Sanbao; Ren Yaoyao#

Journal of Materials Processing Technology

2018, 252(2):618-627
The Effect of Martensitic Phase Transformation Dilation on Microstructure, Strain-Stress and Mechanical Properties for Welding of High-Strength Steel

Chen Xizhang#; Wang Pengfei#; Pan Qiuhong#; Lin Sanbao

Crystals

2018,8(7):293
Keyhole welding of AA2219 aluminum alloy with double-pulsed variable polarity gas tungsten arc welding

Wang Yipeng#; Qi Bojin#; Cong Baoqiang#; Zhu Mingjie#; Lin Sanbao

Journal of Manufacturing Processes

2018,34(8):179-186
Study on the arc behaviors under the condition of argon and helium supply alternately

*Dai Hongbin; Wang Haoran; Shen Xiuqiang; Lin Sanbao

Modern Physics Letters B

2018,32(26):**
7050铝合金搅拌摩擦焊接头腐蚀行为分析

张华#; 崔冰#; 林三宝; 石功奇#

焊接学报,

2018,(7):71-74
7050-T7451铝合金静轴肩搅拌摩擦焊接头组织与性能研究

张华#,赵常宇#,林三宝,石功奇#

焊接

2018,(9):5-9
Gas tungsten arc welding of network structured titanium matrix composite

Huang Lujun; Duan Tianbo*; An Qi*; Chen Youyou*; Bai Jiuyang*; *Geng Lin; Lin Sanbao

Science and Technology of Welding and Joining

2018, 23(5):357-364
2017年度

lXiaoyu Cai, Chenglei Fan, Sanbao Lin, Chunli Yang, Xiangru Ji & Li Hu. Effects of shielding gas composition on arc characteristics and droplet transfer in tandem narrow gap GMA welding. Science and Technology of Welding and Joining. 2017,22(5):446-453

lXiaoyu Cai, Chenglei Fan, Sanbao Lin, Xiangru Ji, Chunli Yang, Wenxuan Guo. Effects of shielding gas composition on arc properties and wire melting characteristics in narrow gap MAG welding. Journal of Materials Processing Technology. 2017,244(6):225-230

lJ.Y. Bai, C.L. Fan, S.B. Lin, C.L. Yang, and B.L. Dong. Mechanical Properties and Fracture Behaviors of GTA-Additive Manufactured 2219-Al After an Especial Heat Treatment. Journal of Materials Engineering and Performance. 2017, 26, (4) :1808–1816

lQihao Chen, Sanbao Lin, Chunli Yang？, Chenglei Fan, Hongliang Ge. Grain fragmentation in ultrasonic-assisted TIG weld of pure aluminum. Ultrasonics - Sonochemistry. 2017,29(11): 403–413

lXiaoyu CaiChenglei FanSanbao Lin, Chunli YangLi HuXiangru Ji. Effects of shielding gas composition on arc behaviors and weld formation in narrow gap tandem GMAW. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-017-9990-0

l赵红星， 陈琪昊， 杨春利， 林三宝. 超声冲击对Al-Cu合金TIG焊缝微观组织演变的影响. 焊接学报. 2017，38 (2), 79-82

l徐望辉， 林三宝， 杨春利， 范成磊. 摆动电弧窄间隙GMAW熔滴过渡规律. 焊接学报. 2017,38 (2), 109-114

lQihao Chen, Hongliang Ge, Chunli Yang *, Sanbao Lin and Chenglei Fan. Study on Pores in Ultrasonic‐Assisted TIG Weld of Aluminum Alloy. Metals. 2017, 7(2), 53

lKang Peng, Chunli Yang, Sanbao Lin, Chenglei Fan. Effect of arc distance on HAZ thermal cycles and microstructural evolution 10CrNi3MoV steel. International Journal of Advanced Manufacturing Technology. 2017,90(9):3387-3395

l陈琪昊; 林三宝; 杨春利; 范成磊. 周期超声对铝合金TIG焊缝成形影响机制分析. 焊接学报. 2017, 38(3): 9-12

l赵红星; 陈琪昊; 杨春利; 林三宝. 超声冲击对Al-Cu合金TIG焊缝微观组织演变的影响. 焊接学报. 2017, 38(2): 79-82

l徐望辉; 林三宝; 杨春利; 范成磊. 摆动电弧窄间隙GMAW熔滴过渡规律. 焊接学报. 2017, 38(2): 109

2016年度

Weifeng Xie*, Chenglei Fan, Chunli Yang, Sanbao Lin. Effect of acoustic field parameters on arc acoustic binding during ultrasonic wave-assisted arc welding. Ultrasonics Sonochemistry, 2016,29:476-484

Xiaoyu Cai*, Sanbao Lin, Chenglei Fan, Chunli Yang, Wei Zhang#, Yaowei Wang#. Molten pool behaviour and weld forming mechanism of tandem narrow gap vertical GMAW. Science and Technology of Welding and Joining. 2016,21 (2):124-130.

Jiuyang Bai*, Chunli Yang, Sanbao Lin， Bolun Dong*，Chenglei Fan. Mechanical properties of 2219-Al components produced by additive manufacturing with TIG. Internal Journal of Advanced Manufacturing Technology. 2016,86(1):479–485

Jiuyang Bai*, Chenglei Fan, Sanbao Lin, Chunli Yang, Bolun Dong*. Effects of thermal cycles on microstructure evolution of 2219-Al during GTA-additive manufacturing. Internal Journal of Advanced Manufacturing Technology. 2016,87(9):2615–2623

Xiaoyu Cai*, Chenglei Fan, Sanbao Lin, Chunli Yang, Jiuyang Bai. Molten pool behaviors and weld forming characteristics of all-position tandem narrow gap GMA. International Journal of Advanced Manufacturing Technology. 2016,87(5):2437-2444

Weifeng Xie*, Chenglei Fan, Chunli Yang, Sanbao Lin. Pulsed ultrasonic wave assisted GMAW of 7A52 aluminum alloy. Welding Journal. 2016,95(7):239-247

Qihao Chen*, Sanbao Lin, Chunli Yang, Chenglei Fan. Effect of Ultrasonic Impact on the Microstructure of Welded Joint of 2195Al-Li alloy. Acta Metallurgica Sinica-English Letters. 2016,29(4):367？372

Qihao Chen*, Sanbao Lin, Chunli Yang, Chenglei Fan， Hongliang Ge*. Effect of Ultrasound on Heterogeneous Nucleation in TIG Welding of Al-Li Alloy. Acta Metallurgica Sinica-English Letters. 2016,29(12):1081-1088.

柏久阳*, 范成磊，林三宝，杨春利. 基板散热作用对电弧堆焊成形中熔宽调控的影响. 焊接学报. 2016, 37(3):115-119

柏久阳*，范成磊，杨雨晨#，徐艳利#, 李瑞#，林三宝，王计辉*. 2219铝合金TIG填丝堆焊成型薄壁试样组织特征. 焊接学报. 2016, 37(6):124-128

柏久阳*, 王计辉*, 林三宝, 杨春利, 范成磊. 电弧増材制造厚壁结构焊道间距计算策略. 机械工程学报. 2016.52(10):97-102

谢伟峰*，范成磊，杨春利，林三宝，陶波*. 超声辅助MIG焊接中超声作用特性研究. 机械工程学报. 2016,52(2):19-25

陈琪昊*，林三宝，杨春利，范成磊. 随焊超声施加方法对铝合金TIG焊缝成形影响. 焊接学报. 2016,37(11):67-70

陈琪昊*，林三宝，杨春利, 范成磊，曲宏韬*. 随焊超声冲击对2A14铝合金TIG焊接接头显微组织和力学性能的影响. 中国有色金属学报. 2016,26(10):2071-2077

董博伦*, 柏久阳*, 林三宝, 范成磊，杨雨晨#，徐艳利#，李瑞#，侯兆滨#. 激光/电弧增材制造金属的热处理工艺研究现状与发展. 焊接. 2016,(4):17-22

范成磊; 姚庆泰; 杨春利; 林三宝; 寇毅. 超声-MIG焊接铝合金熔滴过渡行为. 焊接学报. 2016,37(6):35-39

彭康;杨春利;林三宝;范成磊;韩永庆. 10CrNi3MoV钢双面双弧焊接头组织与性能研究. 焊接. 2016,(1):11-15

董博伦;柏久阳;林三宝;范成磊;杨雨晨. 激光/电弧增材制造金属的热处理工艺研究现状与发展. 焊接. 2016,(4):17-22