基本信息ResearchPublicationsOpennings(招生)
基本信息
主要从事金属及其复合材料的设计、制备和先进表征等研究工作，针对金属及其复合材料的“”强度—塑性/韧性“”的倒置问题，采用电子显微分析、同步辐射、中子衍射等先进表征技术原位揭示金属材料结构设计与力学特性的关系。

主持国家自然科学基金2项，主持国家重点研发计划子课题1项，参与973项目1项，发表SCI论文50余篇，其中第一和通讯作者论文40余篇，申请国家发明专利18项，授权7项。

学习经历
2004/09-2009/04，哈尔滨工业大学，材料科学与工程学院，硕士，博士（连读）

2000/09-2004/07，中国矿业大学，金属材料及工艺系，本科/学士





研究工作经历
2016/04-至今，哈尔滨工业大学，材料科学与工程学院，博士生导师

2013/12-至今，哈尔滨工业大学，材料科学与工程学院，副教授

2012/06-2013/06，丹麦技术大学，Riso国家实验室，访问学者

2009/07-2016/04，哈尔滨工业大学，材料科学与工程学院，硕士生导师

2009/07-2013/12，哈尔滨工业大学，材料科学与工程学院，讲师

2009/07-2009/10，德国亚琛大学，IMM金属所，访问学者

2008/09-2008/12，德国亚琛大学，IMM金属所，访问学者




讲授课程
透射电子显微学(Transmission Electron Microscopy)，学科专业课，面向对象：硕士研究生材料微结构表征与分析，学科专业课，面向对象：博士研究生材料分析测试方法，专业必修课，面向对象：本科生


研究方向
1. 金属复合材料的构型强韧化设计与制备

强化金属材料是材料研究者不懈追求的目标，大多数情况下，随强度升高，塑性和韧性下降，强度-塑性（韧性）呈倒置关系。针对这一问题，本研究通过层状、梯度等构型设计提高复合材料的强韧性。

层状TiAl复合材料的设计、制备与强韧化机制研究
层状金属结构材料的制备与强韧化机制研究

2. 金属材料形变特性的定量化可视化表征

金属结构材料塑性变形过程中形变微结构与局域应变分布特性是决定金属材料力学特性的关键因素，形变微结构与局域应变分布的定量化与可视化表征研究是实现金属材料强韧化的核心科学问题。

金属复合材料形变微结构定量表征（TEM与EBSD）

金属复合材料形变过程的局域应力、应变可视化研究（同步辐射成像、微束衍射、白光劳厄衍射、中子衍射、DIC、AFM等）




科研项目

项目名称基于局域应变分布分析的Ti/Al层状金属复合材料变形特性与强韧化机制研究

项目来源国家自然科学基金 面上项目

开始时间2016.01

结束时间2019.12

项目经费74.12万

担任角色负责
项目类别纵向项目
项目状态进行中


项目名称层状结构Ti5Si3/TiAl复合材料板材的合成理论与力学特性

项目来源国家自然科学基金 面上项目

开始时间2016.01

结束时间2019.12

项目经费35/74.2万

担任角色参与
项目类别纵向项目
项目状态进行中


项目名称可调控增强体/基体界面的铝基复合材料的形变与断裂行为原位观察

项目来源上海光源开放课题

开始时间2015.09

结束时间2016.12

项目经费96机时

担任角色负责
项目类别纵向项目
项目状态进行中


项目名称Strain？gradient？measurements？near？interfaces？in？laminated？Ti-Al？composites？

项目来源美国APS光源开放课题

开始时间2015.10

结束时间2017.12

项目经费2周机时

担任角色负责
项目类别纵向项目
项目状态进行中

期刊论文
K. S. Miao, D. Y. Li, G. Z. Tang*, C. Xu,L. Geng, J. Zhang, X. S. Leng, H. J. Kang, T. W. Wang, S. Yan, H. L. Xie, T. Q. Xiao, G. H. Fan*. High elongation achieved by band-like distribution of reinforcements in aluminum matrix composites, Materials Characterization, in press.
M. Huang, C. Xu, G. H. Fan*, E. Maawad, W. M. Gan, L. Geng, F. X. Lin, G. Z. Tang, H. Wu, Y. Du, D. Y. Li, K. S. Miao, T. T. Zhang, X. S. Yang, Y. P. Xia. Role of layered structure in ductility improvement of layered Ti-Al metal composite, Acta Materialia, 153, 235-249, 2018.
T. T. Zhang, X. S. Yang, K. S. Miao, D. Y. Li, S. Chen, X. P. Cui, M. Huang, G. H. Fan*, L. Geng. Microstructure evolution and brazing mechanism of Ti₅Si₃/Ti₃Al composite and Ni-based superalloy joints using Ti-Zr-Cu-Ni filler alloy, Materials Science and Engineering A, 713,28-34, 2018.
T. T. Zhang, G. H. Fan*, H. Wu, X. P. Cui, M. Huang, K. S. Miao, L. Geng.Atomic-scale analysis of early-stage precipitation in Ti(Al,Si)₃ alloy, Materials & Design. 134, 244-249, 2017.
T. T. Zhang, G. H. Fan*, K. S. Miao, K. Chen, Z. H. Pan, S. Chen, X. P. Cui, M. Huang, L. Geng. Bimodal laminated Ti₃Al matrix composite achieved by in situ formed Ti₅Si₃ reinforcements. Materials Science and Engineering A, 707, 419-425, 2017.
H. Wu,L. Geng, G. H. Fan*, X. Y. Teng, H. L. Qi. Nanoscale strain characterization of Ti₃Al precipitate-reinforced Ti alloys. Materials Letters, 209, 182-184, 2017.
M. Huang, J. S. Chen, H. Wu, G. H. Fan*, L. Geng. Strengthening and toughening of layered Ti-Al metal composites by controlling local strain contribution. IOP Conference Series: Materials Science and Engineering, 219, 012028, 2017.
S. S. Wang, J. T. Jiang, G. H. Fan, A. M. Panindre, G. S. Frankel, L. Zhen. Accelerated precipitation and growth of phases in an Al-Zn-Mg-Cu alloy processed by surface abrasion. Acta Materialia, 131, 233-245, 2017.
G. H. Fan*, H. Wu, L. Geng, Z. Z. Zheng, X. P. Cui, D. Hu. Influence of plastic strain localisation on the mechanical properties of metal matrix composites. Philosophical Magazine Letters, 97, 241-248, 2017.
G. H. Fan*, L. Geng, H. Wu*, K. S. Miao, X. P. Cui, H. J. Kang, T. M. Wang, H. L. Xie, T. Q. Xiao. Improving the tensile ductility of metal matrix composites by laminated structure: A coupled X-ray tomography and digital image correlation study. Scripta Materialia, 135, 63-67, 2017.
H. Wu, G. H. Fan*, M. Huang, L. Geng, X. P. Cui, H. L. Xie. Deformation behavior of brittle/ductile multilayered composites under interface constraint effect. International Journal of Plasticity, 89: 96-109, 2017.
M. Huang, G. H. Fan*, L. Geng, G. J. Cao, Y. Du, H. Wu, T. T. Zhang, H. J. Kang, T. M. Wang, G. H. Du, H. L. Xie. Revealing extraordinary tensile plasticity in layered Ti-Al metal composite. Scientific Reports, 20, 6, 38461, 2016.
H. Wu, G. H. Fan*, L. Geng, X. P. Cui, M. Huang. Nanoscale origins of the oriented precipitation of Ti₃Al in Ti-Al systems. Scripta Materialia, 125, 34-38, 2016.
H. Wu, G. H. Fan*, M. Huang, L. Geng, X. P. Cui, R. C. Chen, G. Y. Peng. Fracture behavior and strain evolution of laminated composites. Composite Structures, 163, 123-128, 2016.
X. Cui, G. Fan*, L. Huang, J. Gong, H. Wu, T. Zhang, L. Geng, S. Meng, Preparation of a novel layer-structured Ti₃Al matrix composite sheet by liquid-solid reaction between Al foils and TiB/Ti composite foils, Materials & Design, 101, 181-187, 2016.
Y. Du, G. Fan*, L. Geng, A study on the orientation inheritance in laminated NiAl produced by in situ reaction annealing, Micron, 83, 42-47, 2016.
H. Wu, G. Fan*, B. C. Jin, L. Geng, X. Cui, M. Huang, Fabrication and mechanical properties of TiB_w/Ti-Ti(Al) laminated composites, Materials & Design, 89, 697-702, 2016.
H. Wu, G. Fan*, B. C. Jin, L. Geng, X. Cui, M. Huang, X. Li, S. Nutt, Enhanced fracture toughness of TiB_w/Ti₃Al composites with a layered reinforcement distribution, Materials Science and Engineering A, 670, 233-239, 2016.Y. Du, G. H. Fan*, T. Yu, N. Hansen, L. Geng, X. Huang, Effects of interface roughness on the annealing behaviour of laminated Ti-Al composite deformed by hot rolling, IOP Conference Series: Materials Science and Engineering, 89, 012021, 2015.
H. Wu, B. C. Jin, L. Geng, G. H. Fan*, X. P. Cui, M. Huang, R.M. Hicks, S. Nutt, Ductile-phase toughening in TiB_w/Ti-Ti₃Al metallic-intermetallic laminate composites, Metallurgical and Materials Transaction A, 46A, 3803-3807, 2015.
G.H. Fan*, Q.W. Wang, Y. Du, L. Geng, W. Hu, X. Zhang, Y. D. Huang, Producing laminated NiAl with bimodal distribution of grain size by solid–liquid reaction treatment, Materials Science and Engineering A, 590, 318-322, 2014.
X. P. Cui, G.H. Fan*, L. Geng, H. Wu, J. C. Pang, J.X. Gong, Influence of raw material selection and fabrication parameters on microstructure and properties of micro-laminated TiB₂-TiAl composite sheets, Materials Science and Engineering A, 589, 83-88, 2014.
H. Wu, G. H. Fan*, X. P. Cui, L. Geng, S. H. Qin, M. Huang, A novel approach to accelerate the reaction between Ti and Al, Micron, 56, 49-53, 2014.
G. H. Fan, Y. B. Zhang, J. H. Driver, D. Juul Jensen*, Oriented growth during recrystallization revisited in three dimensions, Scripta Materialia, 72-73, 9-12, 2014.
Q. W. Wang, G. H. Fan*, L. Geng, J. Zhang, Y. Z. Zhang, X. P. Cui, Formation of intermetallic compound layer in multi-laminated Ni-(TiB₂/Al) composite sheets during annealing treatment, Micron, 45, 150-154, 2013.
Q. W. Wang, G. H. Fan*, L. Geng, J. Zhang, X. P. Cui, J. C. Pang, S. H. Qin, Y. Du, A novel fabrication route to microlaminated TiB₂-NiAl composite sheet with {111}<μνω> texture by roll bonding and annealing treatment, Intermetallics, 37, 46-51, 2013.
G. S. Wang, G. H. Fan*, L. Geng, W. Hu, Y. D. Huang, Microstructure evolution and mechanical properties of TiB₂/Cu composites processed by equal channel angular pressing at elevated temperature, Material Science and Engineering A, 571, 144-149, 2013.
H. Wu, X. P. Cui, L. Geng, G. H. Fan*, J. C. Pang, L. S. Wei, Fabrication and characterization of in-situ TiAl matrix composite with controlled microlaminated architecture based on SiC/Al and Ti system, Intermetallics, 43, 8-15, 2013.
J. C. Pang, X. P. Cui, A. B. Li, G. H. Fan*, L. Geng, Z. Z. Zheng, Q. W. Wang, Effect of solid solution of Si on mechanical properties of TiAl₃ based on the multi-laminated Ti-(SiC_P/Al) composite system, Materials Science and Engineering A, 579, 57-63, 2013.
J. C. Pang, G. H. Fan*, X. P. Cui, A. B. Li, L. Geng, Z. Z. Zheng, Q. W. Wang, Mechanical properties of Ti-(SiC_P/Al) laminated composite with nano-sized TiAl₃ interfacial layer synthesized by roll bonding, Materials Science and Engineering A, 582, 294-298, 2013.
H. Wu, G.H. Fan*, X. P. Cui, L. Geng, F. Yuan, J. C. Pang, L. S. Wei, M. Huang, Mechanical properties of (Ti₂AlC+Ti₃AlC)-TiAl ceramic-intermetallic laminate (CIL) composites. Materials Science and Engineering A, 585, 439-443, 2013.
J. C. Pang, G. H. Fan*, X. P. Cui, A.B. Li, L. Geng, Z. Z. Zheng, Q. W. Wang, Microstructure evolution of in situ (Ti₃AlC + Ti₅Si₃)/Ti₃Al composite sheet with a novel quasi-continuous chain reinforcement distribution architecture prepared by using roll bonding and reaction annealing, Journal of Materials Science & Technology, 29(12), 1191-1196, 2013.
Q. W. Wang, G. H. Fan*, L. Geng, J. Zhang, Y. Z. Zhang, Wide stacking fault of aluminum for multilayered TiB₂/Al-Ni composite by roll bonding process, Materials Science and Engineering A, 534, 609-613, 2012.
X. P. Cui, G. H. Fan*, L. Geng, Y. Wang, H. W. Zhang, H. X. Peng, Fabrication of fully dense TiAl-based composite sheets with a novel microlaminated microstructure, Scripta Materialia, 66, 276-279, 2012.
X. P. Cui, G. H. Fan*, L. Geng, Y. Wang, L. J. Huang, H. X. Peng, Growth kinetics of TiAl₃ layer in multi-laminated Ti-(TiB₂/Al) composite sheets during annealing treatment, Materials Science and Engineering A, 539, 337-343, 2012.
G. H. Fan*, Q. W. Wang, L. Geng, G. S. Wang, Y. C. Feng, Preparation and characterization of aluminum matrix composites based on Al-WO₃ system, Journal of Alloys and Compounds, 545, 130-134, 2012.
G. H. Fan, L. Geng*, Z. Z. Zheng, G. S. Wang, The effect of an interfacial layer containing nanosized Pb particles on the damping behavior in Al₁₈B₄O₃₃/Al composite, Scripta Materialia, 59(5), 534-537, 2008.
G. H. Fan, L. Geng*, Z. Z. Zheng, G. S. Wang, Y. C. Feng, Hot extrusion deformation behavior of BaPbO₃/2024Al composite containing a small volume of liquid phase, Materials Science and Engineering A, 496, 281–284, 2008.
G. H. Fan, L. Geng*, Z. Z. Zheng, G. S. Wang, P. Q. Zheng, Preparation and characterization of Al₁₈B₄O₃₃+BaPbO₃/Al hybrid composite, Materials Letters, 62, 2670–2672, 2008.

会议论文
G.H. Fan*, L.Geng, Q.C.Meng, TEM characterization and formation mechanism of nanosized insoluble intermetallic in 2024Al during ball milling and sintering. The 7th Pacific Rim International Conference on AdvancedMaterials and Processing. 2010.08.01 - 2010.08.05, Cairns Australia, 2010, Oral presentation.
J.C. Pang, L. Geng*, G.H. Fan, Microstructure evolution of SiC_P/Al-Ti foils during hot rolling and reaction annealing, 12th Joint China-Russia Symposium on Advanced Materials and Processing Technology, Oct., Khabarovsk, Russia, 2011.
X.P. Cui, G.H. Fan*, L. Geng, H.X. Peng, X.D. Zhang, Preparation and properties of TiAl composite sheets with layered structure, 33rd Ris？ International Symposium on Materials Science, 2012.09.03 - 2012.09.07, 209-215, Roskilde/Denmark, 2012, Oral presentation.
X.P. Cui*, G.H. Fan, L. Geng, L.J. Huang, H.X. Peng, Microstructure and properties of TiB₂–TiAl composite sheets prepared by foil metallurgy, the 19TH International Conference on Composite Materials, 2013.07.28 - 2013.08.02, 546-549, Montreal/Canada, 2013, Oral presentation.
H. Wu, G.H. Fan*, L. Geng, A novel route to fabricate (Ti₂AlC+Ti₃AlC) -TiAl laminate composites by hot pressing and reaction annealing, 2nd Summer School and Symposium on Nanometals, 19-23 Aug., 2013, Weihai, China, Poster.
Y. Du, G.H. Fan*, L. Geng. Microstructure and mechanical behavior of laminated NiAl fabricated by reaction synthesis. 2nd Summer School and Symposium on Nanometals. Poster. 19-23 Aug., 2013, Weihai, China, Poster.
H. Wu, G.H. Fan*, L. Geng, Microstructure evolution of SiC_P/Al-Ti sheets during hot pressing and reactive annealing, 14th Joint China-Russia Symposium on Advanced Materials and Processing Technology, 23-27 Oct., Khabarovsk, Russia, 2013.
J.C. Pang, L. Geng, G.H. Fan*, A.B. Li, J. Zhang, Z.Z. Zheng, X.P. Cui, Q.W. Wang, Microstructure and reaction mechanism of multi-laminated Ti-(SiC_P/Al) composites subjected to annealing at 1300°C, 7th International Conference on Physical and Numerical Simulation of Materials Processing, 16-19th June, pp 526-530, Oulu, Finland, 2013, published on Materials Science Forum.
范国华*, 崔喜平, 王银, 耿林, 层状TiAl基复合材料的设计、制备与表征，第五届海内外中华青年材料科学技术研讨会暨第十三届全国青年材料科学技术研讨会, 西安, 2011.10.13 - 2011.10.16, 分会场邀请报告.
范国华*, 杜岩, 王庆伟, 崔喜平, 耿林, 层状NiAl的设计、制备与表征，第二届金属间化合物学术会议, 2013.07.03 - 2013.07.07, 中国黑河, 2013, 口头报告.
范国华*, 张玉彬, J. Driver, D. Juul Jensen, 取向三晶铝的变形与再结晶的3D-EBSD表征,东北三省第16届电子显微学学术会议. 2013.07.23 - 2013.07.27, 中国丹东, 2013, 大会邀请报告.
范国华*, 孟庆昌, 甄良, 耿林, D. Juul Jensen, FIB技术在金属结构材料的变形与再结晶研究中的应用,第四届中国FIB技术与学术交流研讨会, 2013.11.21 - 2013.11.22, 中国天津, 2013, 大会邀请报告.

专利
NiAl基复合材料板材轧制成形技术，ZL**7.9一种TiAl基合金板材的制备方法， ZL**5.4辐射防护铝基复合材料及其真空热压制备方法， ZL**9.3一种Al基复合材料及利用该Al基复合材料快速制备TiAl基复合材料板材的方法，ZL**1.6ZnWO4涂覆硼酸铝晶须增强铝基复合材料及其制备方法， ZL**8.7陶瓷相增强体表面涂覆钨酸锌的方法， ZL**3.0一种球形Ti3Al/TiAl双向合金的制备方法， ZL**0.9辐射防护铝基复合材料及两级大气热压制备该材料的方法，ZL**7.8网状Ti5Si3加弥散TiC增强TiAl基复合材料的制备方法，ZL**.7层状FeAl基复合材料板材的制备方法， ZL**5.5一种TiAl基层状复合材料板的制备方法，ZL**0.1Ti3Al-TiAl层状复合材料的制备方法，ZL**2.3一种层状NiAl材料及其制备方法，ZL**1.1TiAl基复合材料板材轧制成形技术，ZL**5.5


招生信息


真诚欢迎有材料、物理、化学背景的同学来课题组攻读学士、硕士、博士学位。

本科生招生：1~2人/年

硕士生招生：1~2人/年

博士生招生：1~2人/年

往年申请 — 考核的相关要求见研究生院网站

感兴趣的同学请发送信息至 ghfan@hit.edu.cn