姓 名：庄可佳
性 别：男
出生年月：1988.01
职 称：副教授
学 历：研究生学历
学 位：博士学位
邮 箱：zhuangkj@whut.edu.cn
个人简历：
2006.09～2010.06 华中科技大学机电科学与工程学院本科
2010.09～2016.03 华中科技大学机电科学与工程学院硕博连读
2016.04～至今 武汉理工大学机电工程学院

主要研究方向：
数控加工过程物理仿真及其表面完整性
数据驱动的制造可靠性及工艺调控

在研项目：
1.国家自然科学基金（青年基金） 基于激光加热辅助的高温合金高效铣削界面热影响规律及实验研究 2018-2020 负责人
2.湖北省青年基金 压气机叶片机器人磨抛机理与关键技术研究 2017-2018 负责人
3.数字制造装备与技术国家重点实验室开放基金 难加工复杂叶片预热辅助切削加工工艺及机理研究 2017.03-2019.03 负责人
4.武汉理工大学自主创新基金等

主要成果简述：
1.Zhuang KJ, Zhu DH, Zhang XM*, Ding H (2014) Notch wear prediction model in turning of Inconel 718 with ceramic tools considering the influence of work hardened layer. Wear 313 (1):63-74 (SCI, Q1)
2.Zhuang KJ, Zhang XM*, Zhang D, Ding H (2013) On cutting parameters selection for plunge milling of heat-resistant-super-alloys based on precise cutting geometry. Journal of Materials Processing Technology 213 (8):1378-1386 (SCI, Q1)
3.Zhuang KJ, Weng J, Zhu DH*, Ding H (2018) Analytical modeling and experimental validation of cutting forces considering edge effects and size effects with round chamfered ceramic tools. ASME-Journal of Manufacturing Science and Engineering 140 (8):081012-081012-081016. doi:10.1115/1.** (SCI, Q1)
4.Zhuang KJ, Zhu DH*, Ding H, (2018) An analytical cutting force model for plunge milling of Ti6Al4V considering cutter runout. The International Journal of Advanced Manufacturing Technology 94 (9-12):3841-3852. doi:10.1007/s00170-017-1078-3 (SCI, Q2)
5.Zhuang KJ, Zhang XM*, Zhu DH, Ding H (2015) Employing preheating-and cooling-assisted technologies in machining of Inconel 718 with ceramic cutting tools: towards reducing tool wear and improving surface integrity. The International Journal of Advanced Manufacturing Technology 80 (9-12):1815-1822 (SCI, Q2)
6. Weng J, Zhuang KJ*, Hu C, Zhu D, Guo SS, Ding H (2018). A novel approach to thermal modeling based on three-dimensional analysis in turning Inconel 718 with round insert. Journal of Materials Processing Technology 266:588-598.
7.Weng J, Zhuang KJ*, Zhu DH, Guo SS, Ding H (2018) An analytical model for the prediction of force distribution of round insert considering edge effect and size effect. International Journal of Mechanical Sciences 138-139:86-98. doi:https://doi.org/10.1016/ j.ijmecsci.2018.01.024 (SCI, Q1)
8.Zhu DH, Xu XH, Yang Z, Zhuang KJ*, Yan SJ, Ding H (2018) Analysis and assessment of robotic belt grinding mechanisms by force modeling and force control experiments. Tribology International 120:93-98. doi:https://doi.org/10.1016/j.triboint.2017.12.043 (SCI, Q1)
9.Weng J, Zhuang KJ*, Chen D, Guo SS, Ding H (2017) An analytical force prediction model for turning operation by round insert considering edge effect. International Journal of Mechanical Sciences 128:168-180 (SCI, Q1)

对研究生的要求：
良好的数学与英文基础、勤奋好学