更新日期：2018年8月31日
姓 名 倪军 性 别 男
出生年月 1961年11月 籍贯
民 族 汉族 政治面貌 群众
最后学历 博士研究生 最后学位 工学博士
技术职称 教授 导师类别 博、硕导
行政职务Email junni@umich.edu
工作单位 吴贤铭智能工程学院 邮政编码 510640
通讯地址 吴贤铭智能工程学院
单位电话


个人简介
倪军教授，制造工程专家、密西根大学机械机械工程系教授、美国国家科学基金会智能维护系统中心（IMS Center）主任 、密西根大学吴贤铭制造科学冠名教授、吴贤铭制造研究中心主任，上海交通大学校长特聘顾问、密西根学院院长、美国机械工程师学会会士 。曾获美国国家科学基金会总统教师奖、美国机械工程师学会William T. Ennor最高制造技术奖、国际制造工程师学会金奖、上海市政府海外科学家杰出贡献白玉兰金奖、北美中国工程师学会卓越服务奖、中国教育部高等教育教学成果项目国家级一等奖等奖项，任世界经济论坛先进制造全球议事委员会副主席。
工作经历
Academic Positions:
Shien-Ming (Sam) Wu Collegiate Professor of Manufacturing Science, 2006 - present
Professor of Mechanical Engineering, 1997 - present
Associate Professor of Mechanical Engineering, 1993 - 1997
Assistant Research Scientist, 1989 - 1992
Research Fellow, 1987 - 1989
Administrative Positions:
Dean, UM-SJTU Joint Institute, 2006 - 2014
Director, S. M. Wu Manufacturing Research Center (1992 - present)
Co-Director, Multi-Campus National Science Foundation Center for Intelligent Maintenance Systems (2001-present)
Deputy Director, US-China Clean Energy Research Consortium-Clean Vehicles Center (2010 – present)
Deputy Director, NSF-Engineering Research Center for Reconfigurable Manufacturing Systems (2003- 2006, 2013- present)
Director of Laboratory and Space, Mechanical Engineering, (2003- 2006)
Graduate Program Chair, Mechanical Engineering (2002/2003)
Chair, International Program Committee, College of Engineering, (2002-2003)
Director, National Science Foundation funded Center for Dimensional Measurement and Control in Manufacturing (1993 - 1998)
Associate Director, NSF-Engineering Research Center for Reconfigurable Machining Systems, (1996 - 2002)
教育经历
Ph.D., University of Wisconsin-Madison, 1987
M.S., University of Wisconsin-Madison, 1984
B.S., Shanghai Jiaotong University, China, 1982
获奖、荣誉称号
Honors and Awards
- Stephen S. Attwood Excellence in Engineering Award, 2015, the highest honor awarded by the College of Engineering, the University of Michigan
- Best Paper Award, 2014, American Society of Mechanical Engineers Manufacturing Science and Engineering Conference (MSEC).
- Best Paper Award, 2014, International Conference on Frontiers of Design and Manufacturing.
- 2014 IIE Andrew Heiskell Award for Innovation in International Education, Institute of International Education.
- 2014 Alexander Schwarzkopf Award for Technology Innovation, by NSF IUCRC Association
- 2013 International Science and Technology Cooperation Award, by the President of the People’s Republic of China
- 2013 SME Gold Medal Award, by Society of Manufacturing Engineers
- 2013 S. M. Wu Research Implementation Award, by Society of Manufacturing Engineers and North American Manufacturing Research Institute
- 2013 International Science and Technology Cooperation Award, by Shanghai Municipal Government
- Fellow, elected in 2012 by International Society of Engineering Asset Management (ISEAM)
- Fellow, elected in 2011 by International Society for Nanomanufacturing (ISNM)
- University Distinguished Professor, Shanghai Jiao Tong University, 2011-2013
- Distinguished Service Award, 2010, Chinese Institute of Engineers-USA
- Magnolia Gold Medal, 2010, awarded by Shanghai Municipal Government for Outstanding Contribution by Oversea Scientist
- Outstanding Achievement Award, 2010, Oversea Chinese Office, State Council, People’s Republic of China
- Best Paper Award, 2010, International Conference on Frontiers of Design and Manufacturing
- First Prize of National Higher Education Award, 2009, Ministry of Education, People’s Republic of China.
- Best Paper Award, 2009, American Society of Mechanical Engineering Manufacturing Science and Engineering Conference (MSEC).
- William T. Ennor Manufacturing Technology Award, American Society of Mechanical Engineering and Society of Manufacturing Engineering, 2009
- “1000 Talent” Award, Chinese Government, 2008
- Best Paper Award, 2007 SRC TECHCON
- 2006-2007 Education Excellence Award, College of Engineering, The University of Michigan
- Shien-Ming (Sam) Wu Collegiate Professor of Manufacturing Science, University of Michigan, 2006 – present
- Best Paper Award, 2005 SRC TECHCON
- Best Paper Award, 2004, International Conference on Frontiers of Design and Manufacturing
- Fellow, Elected in 2004 by the American Society of Mechanical Engineering
- Magnolia Silver Medal, awarded by Shanghai Municipal Government for Outstanding Contribution by Oversea Scientist, 2003
- Elected Member of Advisory Board, Ministry of Science & Technology, China, 2003 – present
- Member of External Review Board, Chinese Academy of Sciences, 2002 - present
- Best Paper Award, 2002, International Conference on Frontiers of Design and Manufacturing
- Fellow, Elected in 2002 by the Society of Manufacturing Engineers
- 2001-02 Research Excellence Award, College of Engineering, The University of Michigan
- Best Paper Award, 2001 North American Manufacturing Research Conference, NAMRI/SME
- Best Paper Award Finalist, 2000 North American Manufacturing Research Conference, NAMRI/SME
- Distinguished Visiting Chair Professor, Hong Kong Polytechnic University, 2001-2002
- 2000-01 Robert M. Caddell Memorial Award for Outstanding Faculty Achievement, Department of Mechanical Engineering, The University of Michigan
- Advisory Professor, Xi’an Jiao Tong University, 2000 – 2003
- Advisory Professor, Dalian University of Technology, 1999 - 2002
- Changjiang Endowed Chair Professorship, Ministry of Education, China, 1999-2002
- 1999 Outstanding Oversea Scientist Award with a discretionary grant of RMB ￥400,000, National Natural Science Foundation, China
- Advisory Member, Shanghai Pudong Science and Technology Commission, 1998 - 2003
- Member, Advisory Board, Mechanical Industrial Research Lab (MIRL), Industrial Technology Research Institute (ITRI), Taiwan, 1995 – 1998, 2004 - 2011
- Advisory Professor, Tsinghua University, 1998 – 2001, 2003 - 2006
- Advisory Professor, Shanghai Jiao Tong University, China, 1996 – present
- Advisory Professor, Jilin University of Technology, China, 1995- 1998
- Advisory Professor, Huazhong University of Science and Technology, China, 1994 – 1997
- Guest Research Scientist, Chinese Academy of Machinery Science and Technology, Ministry of Machinery Industry, 1995 – 1999, 2003 - present
- 1995 Excellence in Research Award, Department of Mechanical Engineering and Applied Mechanics, University of Michigan
- 1994 Presidential Faculty Fellow Awards with $500,000 grant, named by President W. J. Clinton, funded through the National Science Foundation
- 1991 Outstanding Young Manufacturing Engineer Award, Society of Manufacturing Engineers
社会、学会及学术兼职
University Distinguished Professor, Shanghai Jiao Tong University, 2011-2013
“1000” Scholar, Ministry of Organization Development, China, 2009-2012
Special Counsel to President, Shanghai Jiao Tong University, 2009-2013
Distinguished Endowed Visiting Professorship, Ministry of Education, China, 2003- 2005
Endowed Professorship, Ministry of Education, China, 1999 – 2002,
Distinguished Visiting Chair Professor, Hong Kong Polytechnic University, 2001-2002, 2003-2004
DaimlerChrysler Summer Professorship, 2002, 2003, 2005
Research Assistant, University of Wisconsin-Madison, 1983-1987
Assistant Lecturer, Shanghai Jiaotong University, China, 1982-1983
科研项目
1. “Modeling and Experimental Investigation of Friction Stir Resistance Spot Welding of Dissimilar Materials,” NSF, $300,000, 9/1/2015-8/31/2018
2. “A Customized Consultation System for Remote Fault Diagnosis,” China State Shipbuilding Corporation, $166,000, 5/1/2014-8/31/2015,
3. “Intelligent Maintenance Systems,” Samsung, $40,000, 10/1/2014-9/30, 2015
4. “Development and Implementation of Multi-Stage Modeling, Analysis and Validation for P&G Diaper Production Systems,” P&G, $100,000, 1/1/2015-12/31/2015
5. “Developing a Framework for Intelligent Maintenance Systems for Manufacturing Equipment and Processes – Methodology, Metrics, and Best Practices,” National Institute of Standards and Technology (NIST), $52,000, 9/1/2014-8/31/2015
6. “Collaborative Research on Event-based Analytics for Enhancing Prognostics Design in a Big Data Environment,” NSF, $99,310, 8/1/2013-7/31/2015
7. “Investigation of Electro-Plastic Effect on Advanced High Strength Steels and Its Application in Friction Stir Joining of Dissimilar Materials,” NSF, $199,662, 9/1/2013-8/31/2016
8. “Virtual Climate Control Simulation,” Perh, Inc., $300,000, 5/1/2013-4/30/2016
9. “NSF-Industry/University Cooperative Research Center on Intelligent Maintenance Systems,” National Science Foundation (EEC-**), $75,000, 10/1/11-9/30/2016
10. “NSF-Industry/University Cooperative Research Center,” $100,000, 9/1/2014-8/31/2015, Zhejiang Yunxia Ltd.
11. “NSF-Industry/University Cooperative Research Center,” $70,000, 1/1/2015 – 12/31/2015, Lippo Group
12. “NSF-Industry/University Cooperative Research Center, $40,000, 9/1/2014-8/31/2015, Shenzhou Aerospace Software Company
13. “US-China Clean Energy Research Consortium-CVC,” Department of Energy, $12,500,000 (PI- Assanis, Co-PI: Ni, Peng, and 10 others), 10/1/2010-9/30/2015
14. “Research Collaboration and Technical Training”, Sany, $230,400, 12/1/2011 – open ended
发表论文
1) S.M. Wu and J. Ni, 1989, "Precision Machining without Precise Machinery", Annals of CIRP , Vol.38/1, pp.533-536
2) F. Shen, J. Ni and S.M. Wu, 1989, "Design and Implementation of a Modular Multi-Processor System for Machine Monitoring and Diagnostics", Transaction of NAMRI , Vol. 17, pp.319-324
3) H. Zhang, J. Ni and S.M. Wu, 1990, "Simulation Study of An Improved Scheme for Forecasting Compensatory Control", Transaction of NAMRI , Vol. 18, pp.329-333
4) J. Ni, P.S. Huang and S.M. Wu, 1992, "A Multi-Degree-of-Freedom Measuring System for CMM Geometric Errors," ASME Transaction, Journal of Engineering for Industry, August, Vol. 114, No. 3, pp.362-369, and also presented at 1991 ASME winter annual meeting.
5) J.S. Chen, J.X. Yuan, J. Ni and S.M. Wu, 1992, "Compensation of Non-rigid Body Kinematic Effect on a Machining Center", Transaction of NAMRI, Vol. 20, pp.325-329
6) J. Ni and S.M.Wu, 1993, "An On-Line Measurement Technique for Machine Volumetric Error Compensation", ASME Transaction, Journal of Engineering for Industry, Feb., Vol. 115, No.1, pp.85-92 (6)
7) Y.D.Chen, J. Ni and S.M. Wu, 1993, "Real-time CNC Tool Path Generation for Machining IGES Surfaces," ASME Transaction, Journal of Engineering for Industry, Vol. 115, No. 4, pp480-486, and Proceedings of ASME winter annual meeting, 1991 (10)
8) Y.D. Chen and J. Ni, 1993, "Dynamic Calibration and Compensation of a 3D Laser Radar Scanning System", IEEE Transaction on Robotics and Automation, Vol. 9, No. 3, pp.318-323, also in Proceedings of the IEEE International Conference on Robotics and Automation, Atlanta, GA, Vol.3, pp.652-658, 1993
9) J.S. Chen, J.X. Yuan, J. Ni and S.M. Wu, 1993, "Real-time compensation for Time-variant Volumetric Error on a Machining Center", ASME Transaction, Journal of Engineering for Industry, Vol. 115, No. 4, pp472-479, and Proceedings of ASME Winter Annual Meeting, 1991 (13)
10) S. Y. Hong, J. Ni, and S. M. Wu, 1994, "Preventive Diagnosis of Minor Machine Failure by DDS Spectrum Analysis", ASME Transaction, Journal of Engineering for Industry, , Vol.116, No.1, pp.130-133, also in Proceedings of the USA-Japan Symposium on Flexible Automation , San Francisco, CA 1992
11) H. Lo, J. X. Yuan, and J. Ni, 1994, "Error Link Metrology and Synthesis Method for Machine Quasi-Static Errors", Transaction of NAMRI, Vol.22, pp.267-273
12) E. Lu, J. Ni and S.M. Wu, 1994, "An Algorithm for the Generation of an Optimum CMM Inspection Path", ASME Transaction, Journal of Dynamic Systems, Measurement and Control, Vol. 116, No.3, pp.396-404 (8)
13) Y.D. Chen, X.J. Tang, J. Ni, and S.M. Wu, 1994, "Automatic Digitization of Free-Form Curve by Coordinate Measuring Machines", International Journal of Production Research, Vol. 32, No. 11, pp.2603-2612, also in Proceedings of ASME WAM, Anaheim, CA 1992 (5)
14) P.S. Huang, and J. Ni, 1995, "On-line error compensation of coordinate measuring machines", International Journal of Machine Tools and Manufacture, Vol. 35, No. 5 , pp. 725-738.
15) C. H. Lo, J. X. Yuan, and J. Ni, 1995, "An Application of Real-time Error Compensation on a Turning Center," International Journal of Machine Tools and Manufacture, Vol. 35, No. 12, , pp. 1669-1682. (36)
16) H. Y. Zhang, and J. Ni, 1995, "Phase Difference and Its Sensitivity Analysis for a Nonlinear Difference-differential Machining Chatter Model," Transaction of NAMRI, Vol. 23, pp.131-136. (3)
17) D. Khorzad, J. Shi, S. J. Hu, J. Ni, E. Zussman, and G. Seliger, 1995, "Optimization of Multiple Panel Fitting in Automobile Assembly," Transaction of NAMRI, Vol. 23, pp.241-146.
18) P.S. Huang, and J. Ni, 1995, "Angle measurement based on the internal-reflection effect and the use of right-angle prisms," Applied Optics, Vol. 34, No. 22, pp. 4976-4981. (16)
19) E. Lu, J. Ni, and S.M. Wu, 1996, "An Integrated Lattice Filter Adaptive Control System for Time-Varying CMM Structural Vibration Control, Part I: Theory and Simulation", ASME Transaction, Journal of Engineering for Industry, Vol. 118, No.1, p 67-76, and also presented at 1992 ASME WAM (1)
20) E. Lu, J. Ni, Z.G. Huang, and S.M. Wu, 1996, "An Integrated Lattice Filter Adaptive Control System for Time-Varying CMM Structural Vibration Control, Part II: Experimental Implementation", ASME Transaction, Journal of Engineering for Industry, , Vol. 118, No.1, p 77-87, and also presented at 1992 ASME WAM
科研创新
1) "Multi-Degree-of-Freedom Geometric Error Measurement System," (with co-inventor: P. S. Huang), US Patent Number: 5,418,611, (Filed June 14, 1993), Date of Patent: May 23, 1995
2) “A Novel Machining Chatter Prevention Technique Through Random Multi-Level Spindle Speed Variation,” (with co-inventors: Alpay Yilmaz, and Emad Al-Regib), disclosure filed, 4/1996
3) “A Roll Measurement Principle and System,” (with co-inventor: Jian He), disclosure filed, 4/1996
4) “High-Speed, Ultra Precision Manufacturing Station That Combines Direct Metal Deposition and EDM,” (with co-inventors: J. Mazumder, and A. Shih), US Patent Number: US2007/** (September 6, 2007)
5) “A Novel Design of an Integrated Bipolar Plate for PEM Fuel Cells,” (co-inventors: Xinmin Lai, Shuhuai Lan, Jun Ni, Zhong-Qin Lin, Linfa Peng, Dongan Liu), Chinese Patent Number: CN **, Filed on July 27, 2006 and Approved on June 4, 2008
6) “A Novel Fabrication Method for PEM Fuel Cell Metal Bipolar Plate Based on Roll Forming,” (co-inventors: Jun Ni, Xinmin Lai, Shuhuai Lan, Zhong-Qin Lin, Linfa Peng, Dongan Liu), Chinese Patent Number: CN **9.2, Filed on Nov 30, 2006 and Approved on Oct 1, 2008
7) “Fabrication of PEM Fuel Cell Bipolar Plates Using Precision Thin-Sheet Forming,” (co-inventors: Xinmin Lai, Jun Ni, Linfa Peng, Peng Hu, Zhong-Qin Lin, Guanlong Chen), Chinese Patent Number: CN **9.9, Filed on Aug 2, 2007 and Approved on Mar 4, 2009
8) “A Novel Fabrication Method for PEM Fuel Cell Stacks,” (co-inventors: Xinmin Lai, Peiyun Yi, Jun Ni, Zhong-Qin Lin, Linfa Peng, Dongan Liu, Shuhuai Lan, Peng Hu), Chinese Patent Application Number: CN**, Filed on July 5, 2007 and Approved on May 27, 2009
9) “Stamped Metal Bipolar Plates for PEM Fuel Cells,” (co-inventors: Jun Ni, Dongan Liu, Linfa Peng, Xinmin Lai, Zhong-Qin Lin, Peng Hu, Jianmin Mai), Chinese Patent Application Number: CN**, Filed on Dec 13, 2007 and Approved on March 24, 2010
10) “A Novel Serpentine Flow Channel Design for PEM Fuel Cells,” (co-inventors: Jun Ni, Linfa Peng, Xinmin Lai, Zhong-Qin Lin, Jianmin Mai), Chinese Patent Application Number: CN**, Filed on Jan 15, 2009 and Approved on Nov 3, 2010
11) “Electrolytic Electric Spark Cutting Composite Micromachining Device and Method,” (co-inventors: Chengjun Wei, Jun Ni, Kaizhou Xu, Dejin Hu, and Limin Xu), Chinese Patent Application Number: CN**4, Filed on Sep 22, 2010, and Approved on Aug 22, 2012
12) “Miniature Metal-Based Grinding Wheel On-Line Electrolytic Electric Spark Dressing Device and Method,” (co-inventors: Chengjun Wei, Jun Ni, Dejin Hu, Kaizhou Xu, and Limin Xu), Chinese Patent Application Number: CN **1, Filed on Oct 15, 2010, and Approved on Aug 22, 2012
13) “Method of Compositely Manufacturing Proton Exchange Membrance Fuel Cell Bipolar Plate and Membrane Electrode Assembly,” (co-inventors: Jun Ni, Linfa Peng, Peiyun Yi, Ximin Lai, and Zhong-qin Lin), Chinese Patent Application Number: CN**, Filed on April 9, 2009 and Approved on Dec 29, 2010
14) “Metal Gas Diffusion Layer Used for Fuel Cell and Preparation Method Thereof,” (co-inventors: Peiyun Yi, Xinmin Lai, Linfa Peng, Diankai Qiu, and Jun Ni), Chinese Patent Application Number: CN**, Filed on Dec 24, 2010 and Approved on Jun 19, 2013
15) “Fuel Cell Auxiliary Current Ultra Thin Metal Bipolar Plate Bonding Device and Method,” (co-inventors: Xinmin Lai, Zhutian Xu, Linfa Peng, Zhongqin Lin, and Jun Ni), Chinese Patent Application Number CN**6, Filed on Oct 30, 2010, Approved on July 2, 2014
16) “Full-hydraulic Driving Roll Fin Impress Device,” (co-inventors: Linfa Peng, Zhaoyang Gao, Peiyun Yi, Jun Ni, and Xinmin Lai), Chinese Patent Application Number CN **5, Filed on Feb 28, 2012 and Published on July 25, 2012
17) “Device and Method for Processing Polymer Film Surface Microstructure Based on Roll-to-Roll Hot Rolling,” (co-inventors: Yujun Deng, Peiyun Yi, Linfa Peng, Xinmin Lai and Jun Ni), Chinese Patent Application Number: CN**, Filed on Aug 16, 2012, and Published on Dec 5, 20124
18) “Hybrid Friction Stir Welding for Dissimilar Materials Through Electro-Plastic Effect,” (co-inventors: Xun Liu, Shuhuai Lan, and Jun Ni), Invention Disclosure, filed to UM on December 2012.
教学活动
New Courses Introduced at U of M
Developed a new course MFG502/ME499 on “Manufacturing Systems Design”, which was initially offered in Fall 2000.
Substantially revised ME 563/IOE 565. Added many case studies of time series analysis applications and introduced student term projects that have received very favorable evaluations from students.
Developed a new course on “Dimensional Metrology in Manufacturing” (ME599), which was initially offered in Winter 1997.