职称
教授/博导


联系方式
办公电话


Email


研究所
测试测量与仪器

联系地址


研究方向
无缺陷连铸坯控制技术、钢液中有害元素脱除方法等

学习工作经历
1980.09～1984.07重庆大学化学冶金专业学习，获工学学士学位
1987.09～1990.01重庆大学钢铁冶金专业学习，获工学硕士学位
1992.09～1996.12重庆大学钢铁冶金专业学习，获工学博士学位
1993.12晋升为副教授
2000.12晋升为教授
2002.04批准为冶金工程学科博士生导师
2006.11～2007.10在美国卡内基梅隆大学（Carnegie Mellon University）钢铁研究中心（CISR）作访问****
其余时间、至今在重庆大学工作；曾任连铸研究室主任和冶金系主任，中国金属学会青年工作委员会委员。



社会兼职
《炼钢》杂志编委
重庆市金属学会理事



学术专长
1）利用物理与数值模拟方法对中间包控流装置、结晶器（包括双锟薄带熔池）伸入式水口设计、评估以及如中包起旋高度、拉速与水口吹氩流量的关系等工艺参数的设计。合作单位有：国家自然科学基金委、西安重型机械研究所、宝钢、武钢、攀钢、马钢、成钢、邯钢、太钢、济钢、重钢、昆钢、南钢、沙钢、维苏威高级陶瓷（苏州）有限公司等企业。
2）连铸结晶器保护渣。该研究方向得到国家自然科学基金四次资助，提出的含钛无氟连铸保护渣理论已得到发明专利授权。合作单位有：宝钢、马钢、重钢、南钢、梅钢、沙钢、珠钢等钢铁企业。与国内连铸保护渣龙头企业—河南西峡保护材料集团公司十年合作，研发的各种机型、拉速、钢种的结晶器连铸保护渣不仅应用在国内所有大中型钢铁企业，而且在海外市场也占一定分额。
3）连铸二冷制度的优化及建立。合作单位有：宝钢、邯钢、太钢、重钢、马钢、南钢等钢铁企业。研发的板坯连铸二冷制度仿真软件应用方便、可靠，得到企业认可。研发的连铸喷嘴性能测试装置，克服了传统检测方法的缺点，有着操作性和维护性强的优点。获国家发明专利。马钢、涟钢、河北理工大学及数家喷嘴生产厂家相继购置了该设备。
4）铸坯质量控制研究，尤其是铸坯角部横裂纹的控制，获国家自然科学基金资助。主要合作单位有宝钢、新疆八钢、攀钢、马钢、梅钢、太钢、重钢、南钢、沙钢等企业。
5）连铸结晶器保护渣性能检测及保护渣使用标准的建立。合作单位有：南钢、宝钢、马钢、梅钢、武钢、河北理工大学、美国卡内基梅隆大学等企业和学校。



主要研究方向
无缺陷连铸坯控制技术
钢液中有害元素脱除方法
结晶器保护渣
冶金过程固体废弃物综合利用



科研项目
负责国家自然科学基金项目3项、主研3项、参研2项；负责十一五国家支撑计划子项目1项，重大专项子课题1项，国家留学回国人员基金和重庆市自然科学基金各1项，近100项企业合作项目。近五年负责科研项目实到经费750万元。



论文及专著
在《Metall. and Mater. Trans.B》、《ISIJ International》、《Ironmaking & Steelmaking》、《Steel Research International》、《Journal of Non-Crystalline Solids》、《Journal of Iron and Steel Research International》、《Journal of University of Science and Technology Beijing》(English Edition)、《钢铁》、《金属学报》、《中国有色金属学报》、《钢铁研究学报》、《工程力学》、《应用力学学报》等国内外刊物和会议上发表论文180余篇，其中被SCI收录论文45篇（他引100余次），EI收录论文60篇。SCI收录论文如下：
45、Li, J;Wen, GH; Tang, P; Zhu, MM; Gao, JJ; Liu, HL，Fluid Flow and Inclusion Motion in a Multi-Heat Teeming Tundish for Heavy Steel Ingot，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: NOV 2012 ，卷: 19 期: 11 页: 19-26
44、Wen, GH; Tang, P; Yang, B; Zhu, XB，Simulation and Characterization on Heat Transfer through Mould Slag Film，ISIJ INTERNATIONAL，出版年: 2012，卷: 52 期: 7 页: 1179-11185
43、Li, J; Wen, GH; Zhu, MM; Tang, P，A NEW APPLICATION OF TURBULATOR IN REMOVING INCLUSIONS BY INJECTING GAS FROM THE SHROUD，METALURGIA INTERNATIONAL，出版年:2012， 卷:17 期:7 页:57-62
42、Wen, GH; Huang, YF; Tang, P; Zhu, MM，Improvement of tundish shape and optimization of flow control devices for sequence casting heavy steel ingots, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 出版年: JAN 2012，卷: 19 期: 1 页: 15-20
41、Li, J;Wen, GH; Tang, P; Zhu, MM，Study on geometric dimension design of multiheat teeming tundish for heavy steel ingots，IRONMAKING & STEELMAKING，出版年: FEB 2012，卷: 39 期: 2 页: 140-146
40、Luo, W; Yan, B; Xiong, YX ;Wen, GH;Xu, HL，Improvement to secondary cooling scheme for beam blank continuous casting，IRONMAKING & STEELMAKING，出版年: FEB 2012，卷: 39 期: 2 页: 125-132
39、Li, J ; Wen, GH；Tang, P ; Zhu, MM，Modeling study of the influence of flow control devices on metallurgical effects in a large-capacity and deep bath tundish，Applied Mechanics and Materials，出版年: 2011，卷: 71-78 页: 4411-4415
38、Wen, GH; Zhu, XB; Tang, P ; Yang, B; Yu, X，Influence of Raw Material Type on Heat Transfer and Structure of Mould Slag，ISIJ INTERNATIONAL，出版年: 2011，卷: 51 期: 7 页: 1028-1032
37、Wang, H ; Tang, P; Wen, GH; Yu, X，Effect of Na(2)O on crystallisation behaviour and heat transfer of high Al steel mould fluxes，IRONMAKING & STEELMAKING，出版年: JUL 2011，卷: 38 期: 5 页: 369-373
36、Zhang, ZT; Wen, GH; Zhang, YY，Crystallization behavior of F-free mold fluxes，INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS ，出版年: APR 2011， 卷: 18 期: 2 页: 150-158
35、Ma, FJ; Wen, GH; Tang, P; Xu, GD; Mei, F; Wang, WL，Effect of Cooling Rate on the Precipitation Behavior of Carbonitride in Microalloyed Steel Slab，METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE，出版年: FEB 2011，卷: 42 期: 1 页: 81-86
34、Zhu, MM; Wen, GH; Tang, P，PHYSICAL AND MATHEMATICAL MODEL ON FLUID FLOW CHARACTERISTICS IN A POOL FOR TWIN ROLL STRIP CASTER，METALURGIA INTERNATIONAL ， 出版年: 2011，卷: 16 期: 10 页: 48-53
33、Zhu, MM; Wen, GH; Tang, P; Chen, YQ，ANALYTICAL METHOD FOR FLOW PATTERN IN MULTI-STRAND TUNDISH，METALURGIA INTERNATIONAL，出版年: 2011， 卷: 16 期: 6 页: 29-32
32、Yu, X; Wen, GH; Tang, P; Ma, FJ; Wang, H，Behavior of Mold Slag Used for 20Mn23Al Nonmagnetic Steel During Casting，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL， 出版年: JAN 2011，卷: 18 期: 1 页: 20-25
31、Zhu, MM; Wen, GH; Tang, P，PHYSICAL AND NUMERICAL SIMULATION ON FLUID FLOW AND HEAT TRANSFER IN A FOUR-STRAND BLOOM TUNDISH，METALURGIA INTERNATIONAL， 出版年: 2011， 卷: 16 期: 2 页: 11-15
30、Xu, HL; Wen, GH;Sun, W; Wang, KZ; Yan, B，Analysis of Thermal Behavior for Beam Blank Continuous Casting Mold，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: DEC 2010 ，卷: 17 期: 12 页: 17-22
29、Chen, ZP; Wen, GH; Jiang, ZK，Mould Powder Characteristics of High Speed for CC Low Carbon Steel Slab，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL 出版年: DEC 2010， 卷: 17 增刊: 2 页: 73-77
28、Zhang, ZT; Wen, GH; Liao, JL; Sridhar, S，Observations of Crystallization in Mold Slags with Varying Al(2)O(3)/SiO(2) Ratio，STEEL RESEARCH INTERNATIONAL，出版年: JUL 2010，卷: 81 期: 7 页: 516-528
27、Xu, HL; Wen, GH; Sun, W; Wang, KZ; Yan, B; Luo, W，Thermal behaviour of moulds with different water channels and their influence on quality in continuous casting of beam blanks，IRONMAKING & STEELMAKING，出版年: JUL 2010， 卷: 37 期: 5 页: 380-386
26、Qi, X; Wen, GH; Tang, P，Viscosity and Viscosity Estimate Model of Fluoride-Free and Titanium-Bearing Mold Fluxes，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: JUN 2010， 卷: 17 期: 6 页: 6-10
25、Yu, X; Wen, GH; Tang, P; Yang, B，Characteristics of Heat Flux Through Slag Film of Mold Slag Used for High Al-TRIP Steel Casting，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: MAY 2010，卷: 17 期: 5 页: 11-16
24、Ma, FJ; Wen, GH; Tang, P; Yu, X; Li, JY; Xu, GD; Mei, F，In situ observation and investigation of effect of cooling rate on slab surface microstructure evolution in microalloyed steel，IRONMAKING & STEELMAKING，出版年: APR 2010， 卷: 37 期: 3 页: 211-218
23、Ryu, HG; Zhang, ZT; Cho, JW; Wen, GH; Sridhar, S，Crystallization Behaviors of Slags through a Heat Flux Simulator，ISIJ INTERNATIONAL， 出版年: 2010， 卷: 50 期: 8 页: 1142-1150
22、Ma, FJ; Wen, GH; Tang, P; Yu, X; Li, JY; Xu, GD; Mei, F，Causes of transverse corner cracks in microalloyed steel in vertical bending continuous slab casters，IRONMAKING & STEELMAKING，出版年: JAN 2010，卷: 37 期: 1 页: 73-79
21、Yu, X; Wen, GH; Tang, P; Wang, H，Investigation on viscosity of mould fluxes during continuous casting of aluminium containing TRIP steels ，IRONMAKING & STEELMAKING，出版年: NOV 2009，卷: 36 期: 8 页: 623-630
20、Niu, YQ; Liu, YH; Zhang, ZK; Wang, P; Luo, BP; Tang, P; Wen, GH，Development and Application of Medium Carbon Steel Mold Powder of CSP CC，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: MAY 2009，卷: 16 页: 241-245
19、Liu, H; Wen, GH; Tang, P，Crystallization Behaviors of Mold Fluxes Containing Li(2)O Using Single Hot Thermocouple Technique ，ISIJ INTERNATIONAL，出版年: 2009，卷: 49 期: 6 页: 843-850
18、Qi, X; Wen, GH; Tang, P，Investigation on heat transfer performance of fluoride-free and titanium-bearing mold fluxes，JOURNAL OF NON-CRYSTALLINE SOLIDS，出版年: DEC 15 2008，卷: 354 期: 52-54 页: 5444-5452
17、Zhao, YH; Tang, P; Wen, GH; Ba, JT，Effect of Mold Slag Film Structure on Heat Transfer，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15 页: 747-752
16、Ba, JT; Wen, GH; Tang, P; Zhao, YH; Qi, X; Ma, FJ，Study on Measuring Method About Horizontal Heat Transfer of Mold Slag Film，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15 页: 767-772
15、Liu, H; Wen, GH; Tang, P，Crystallization Behavior of Quarternary Mold Slag Using the Single Hot Thermocouple Technique，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15 页: 773-777
14、Xu, HL; Wen, GH; Tang, P，Study on Behavior of Slag Entrapment in Mold for Slab Caster，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15 页: 778-784
13、Liang, K; Wen, GH; Tang, P; Zhi, JJ; Yuan, W，Study on Behavior of Flow Field in Wide-Thick Slab Mold，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15 页: 93-97
12、Wen, GH; Liu, H; Tang, P，CCT and TTT diagrams to characterize crystallization behavior of mold fluxes，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: JUL 2008，卷: 15 期: 4 页: 32-37
11、Tang, P; Xu, CS; Wen, GH; Zhao, YH; Qi, X，Heat flux through slag film and its crystallization behavior，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: JUL 2008，卷: 15 期: 4 页: 7-+
10、Tang, P; Yu, YY; Wen, GH; Zhu, MM; Zhou, L; Long, YJ; Liang, Q，Study on the optimization of the combined blown converter process in Chongqing Iron and Steel Company，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING， 出版年: FEB 2008，卷: 15 期: 1 页: 5-9
9、Zhang, ZT; Wen, GH; Tang, P; Sridhar, S，The influence of Al2O3/SiO2 ratio on the viscosity of mold fluxes，ISIJ INTERNATIONAL，出版年: 2008，卷: 48 期: 6 页: 739-746
8、Wang, C; Matsuura, H; Kikuchi, N; Wen, GH; Sridhar, S，Experimental simulation of the role of Ti on transient reactions in Al-killed Fe-melts，REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES，出版年: JAN 2008，卷: 105 期: 1 页: 22-32
7、Zhu, MM; Wen, GH; Tang, P; Wang, YF，Dissymmetric flow phenomenon in a multistrand tundish，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING，出版年: DEC 2007，卷: 14 期: 6 页: 490-494
6、Wang, YF; Wen, GH; Tang, P; Zhu, MM; Chen, YQ; Song, WZ，Mathematical modeling of fluid flow, heat transfer and inclusion transport in a four strand tundish，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING，出版年: FEB 2007，卷: 14 期: 1 页: 22-26
5、Wen, GH; Sridhar, S; Tang, P; Qi, X; Liu, YQ，Development of fluoride-free mold powders for peritectic steel slab casting，ISIJ INTERNATIONAL，出版年: 2007，卷: 47 期: 8 页: 1117-1125
4、Matsuura, H; Wang, C; Wen, GH; Sridhar, S，The transient stages of inclusion evolution during Al and/or Ti additions to molten iron，ISIJ INTERNATIONAL，出版年: 2007，卷: 47 期: 9 页: 1265-1274
3、Wen, GH; Zhang, LF; Tang, P; Su, ZJ; Zhu, MM; Gu, W; Zhao, KW，Modeling study on fluid flow and inclusion motion in 6-strand bloom caster tundishes，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 出版年: AUG 2004, 卷: 11 期: 4 页: 310-314
2、Wen, GH; Tang, P; He, JF; Xu, CS, Behavior of liquid steel in mold for thin slab caster, JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: NOV 2003，卷: 10 期: 4 页: 18-22
1、Wen, GH; Zhu, MM; Ding, PD; He, JF，Study on level fluctuation of twin roll strip caster by water modeling，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: NOV 2002，卷: 9 期: 2 页: 10-14



专利
连铸水口接缝密封剂及其制造工艺，发明专利获权证书号：ZL 03 1 17824.3，1998
含钛高炉渣的无氟连铸保护渣及其制造工艺，发明专利获权证书号：ZL 03 1 17824.3, 2005
连铸二冷喷嘴特性检测方法及装置，发明专利获权证书号：ZL 2005 1 **.1
一种钢水复合精炼剂，发明专利获权证书号：ZL 2006 1 **.5
连铸结晶器内渣膜热流检测方法及装置，发明专利获权证书号：ZL 2006 1 **.6
一种薄板坯连铸结晶器用浸入式水口，实用新型专利获权证书号：ZL4.9
一种异型坯连铸结晶器冷却水缝，实用新型专利获权证书号：ZL4.3
一种低SiO2和Al2O3含量的LF-VD炉还原精炼渣，发明专利获权证书号：ZL 2010 1 **.3
一种低硅低锰超纯转子钢冶炼工艺方法, 发明专利获权证书号：ZL 2010 1 **.4



表彰及奖励
连铸过程流体运动的数理模拟研究及其应用，获国家教育部（原教委）科技进步二等奖，1994。