钢铁共性技术协同创新中心能源用钢团队首席科学家。1989年和1996年分别于北京科技大学并获学士和博士学位，2000-2001年在瑞典Chalmers理工大学访问，2001-2005年在瑞典金属所（Swerea-KIMAB）担任高级研究员。2005年起任北京科技大学教授。长期从事高强钢和电子封装材料方面的研究。教育部新世纪人才，科技部高品质特殊钢总体专家组成员，仪表功能材料学会副理事长，电力行业核电标准化委员会委员。

【研究方向与特色】
研究方向：先进能源用钢
研究特色：为了满足我国核电快速发展和安全运行的需求，近十年来开展了核电站关键装备用钢的应用基础研究，在百万千瓦压水堆主管道材料、工艺及服役性能方面开展了系统深入的研究。与中广核、台海核电等企业紧密合作，完成了第二代、第三代压水堆主管道的研制开发，产品应用于二十几个新建核电机组。

【科研项目】
部分代表性项目：
1.AP1000主管道材料与成形关键技术开发，863计划重大课题，2012-2015
2.海洋建筑结构用不锈钢筋材料开发，863计划项目，2015-2018
3.新一代高导热复合材料界面设计与制备技术研究，国家国际科技合作项目，2014-2017

【近五年科研成果】
在ScriptaMaterialia、Corrosion Science、Journal of Nuclear Materials等学术期刊发表学术论文150余篇。授权发明专利6项。
代表论文：
1. ZifanChe, Jianwei Li, Luhua Wang, Yingxu Qi, Yang Zhang, HailongZhang, Xitao Wang, Jinguo Wang,Moon J Kim, Effect of diamond surface chemistry and structure on the interfacial microstructure andproperties of Al/diamond composites, RSC Advances, 2016, v.6, 67252-67259.
2. Shilei Li, Yanli Wang, Xianyuan Dai, Fang Liu, Jinyu Li, Xitao Wang, Evaluation of hardening behaviors inion-irradiated Fe–9Cr and Fe–20Cr alloys by nanoindentation technique, Journal of Nuclear Materials, 2016,v.478, 50–55.
3. Shilei Li, Yanli Wang, Hui Wang, ChangshengXin, Xitao Wang, Effects of long-term thermal aging on thestress corrosion cracking behavior of cast austenitic stainless steels in simulated PWR primary water,Journal of Nuclear Materials, 2016, v.469, 262–268.
4. Congfeng Wu, Shilei Li, Changhua Zhang, Xitao Wang, Microstructural evolution in 316LN austeniticstainless steel during solidification process under different cooling rates, Journal of Materials Science, 2016,v.51(5), 2529–2539.
5. ZifanChe, Yang Zhang, Jianwei Li, Hailong Zhang, Xitao Wang, Ce Sun, Jinguo Wang, Moon J. Kim,Nucleation and growth mechanisms of interfacial Al4C3 in Al/diamond composites, Journal of Alloys andCompounds, 2016, v.657, 81–89.
6. Jianwei Li, Hailong Zhang, Yang Zhang, ZifanChe, Xitao Wang, Microstructure and thermal conductivity ofCu/diamond composites with Ti-coated diamond particles produced by gas pressure infiltration, Journal ofAlloys and Compounds, 2015, v.647, 941-946.
7. Jianwei Li, Xitao Wang, Yi Qiao, Yang Zhang, Zhanbing He, Hailong Zhang, High thermal conductivitythrough interfacial layer optimization in diamond particles dispersed Zr-alloyed Cu matrix composites,ScriptaMaterialia, 2015, v.109, 72–75.
8. Yang Zhang, Jianwei Li, Lili Zhao, Xitao Wang, Optimisation of high thermal conductivity Al/diamondcomposites produced by gas pressure infiltration by controlling infiltration temperature and pressure,Journal of Materials Science, 2015, v50(2), 688-696.
9. Shilei Li, Yanli Wang, Xitao Wang, Effects of Ni content on the microstructures, mechanical properties andthermal aging embrittlement behaviors of Fe–20Cr–xNi alloys, Materials Science and Engineering A, 2015,v.639, 640-646.
10. Shilei Li, Yanli Wang, Xitao Wang, Effects of ferrite content on the mechanical properties of thermal agedduplex stainless steels, Materials Science and Engineering A, 2015, v.625, 186-193.
11. An He, GanlinXie, Xiaoya Yang, Xitao Wang, Hailong Zhang, A physically-based constitutive model for anitrogen alloyed ultralow carbon stainless steel, Computational Materials Science, 2015, v.98, 64-69.
12. Tao Li, Hailong Zhang, Yong He, Xitao Wang, Comparison of corrosion behavior of Mg-1.5Zn-0.6Zr andAZ91D alloys in a NaCl solution, Materials and Corrosion, 2015, 66(1), 7-15.
13. Yang Zhang, Jianwei Li, Lili Zhao, Hailong Zhang, Xitao Wang, Effect of metalloid silicon addition ondensification, microstructure and thermal-physical properties of Al/diamond composites consolidated byspark plasma sintering, Materials and Design, 2014, v.63, 838-847.
14. XumingLv, Shilei Li, Xitao Wang, Yanli Wang, Zhaoxi Wang, FeiXue, Hailong Zhang, Effect of thermalaging on the leak-before-break analysis of nuclear primary pipes, Nuclear Engineering and Design, 2014,v.280, 493-500.
15. Shilei Li, Yanli Wang, Xitao Wang, FeiXue, G-phase precipitation in duplex stainless steels after long-termthermal aging: A high-resolution transmission electron microscopy study, Journal of Nuclear Materials,2014, v.452(1-3), 382-388.
16. An He, GanlinXie, Hailong Zhang, Xitao Wang, A modified Zerilli-Armstrong constitutive model to predicthot deformation behavior of 20CrMo alloy steel, Materials and Design, 2014, v.56, 122-127.
17. J. H. Wu, H. L. Zhang, Y. Zhang, J. W. Li, and X. T. Wang, The role of Ti coating in enhancing tensile strengthof Al/diamond composites, Materials Science and Engineering A, 2013, v.565, 33-37.
18. S. L. Li, Y. L. Wang, H. L. Zhang, S. X. Li, K. Zheng, F. Xue, and X. T. Wang, Microstructure evolution andimpact fracture behaviors of Z3CN20-09M stainless steels after long-term thermal aging, Journal ofNuclear Materials, 2013, v.433(1-3), 41-49.
19. Shilei Li, Yanli Wang, Hailong Zhang, Shuxiao Li, Genqi Wang, XitaoWang, Effects of prior solutiontreatment on thermal aging behavior of duplex stainless steels, Journal of Nuclear Materials, 2013,v.441(1-3), 337-342.
20. Shilei Li, Yanli Wang, Shuxiao Li, Hailong Zhang, FeiXue, Xitao Wang, Microstructures and mechanicalproperties of cast austenite stainless steels after long-term thermal aging at low temperature, Materialsand Design, 2013, v.50, 886-892.
21. An He, GanlinXie, Hailong Zhang, Xitao Wang, A comparative study on Johnson-Cook, modifiedJohnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in20CrMo alloy steel, Materials and Design, 2013, v.52, 677-685.
22. Weijia Gong, Hailong Zhang, Congfeng Wu, Hang Tian, Xitao Wang, The role of alloying elements in theinitiation of nanoscale porosity in oxide films formed on zirconium alloys, Corrosion Science, 2013, v.77,391-396.
23. Weijia Gong, Hailong Zhang, Yi Qiao, Hang Tian, Xiaodong Ni, Zhongkui Li, Xitao Wang, Grain morphologyand crystal structure of pre-transition oxides formed on Zircaloy-4, Corrosion Science, 2013, v.74, 323-331.
24. Zifan Che, Qingxiao Wang, Luhua Wang, Jianwei Li, Hailong Zhang, Yang Zhang, Xitao Wang, Jinguo Wang, Moon J Kim, Interfacial structure evolution of Ti-coated diamond particle reinforced Al matrix composite produced by gas pressure infiltration, Composites Part B: Engineering, 2017, v.113, 285-290.