杨滨，钢铁共性技术协同创新中心研究员，博士生导师，国家科学技术奖励评审专家，国家留学回国人员启动基金会评专家，罗马尼亚科技项目海外评审专家，博士后基金评审专家，国家以及多省自然科学基金项目评审专家，中核集团、中广核集团、台海集团专家库成员，多种学术期刊的编委和三十余种国内外学术期刊的审稿人。1982年获南昌大学铸造专业学士学位，1989年获浙江大学金属材料学硕士学位，1998年获中国科学院金属研究所材料物理学博士学位，2001.8-2002.9丹麦技术大学物理系和丹麦Riso国家实验室访问，2009.9-2010.4美国犹他大学高级研究。主持或参加国家973计划、863计划、国家自然科学基金项目等20余项。获省部级科技进步一等奖1项、自然科学奖三等奖1项。发表学术论文300余篇，授权国家发明专利40余项。出版学术专著2部。指导博士后2名，研究生70余名。
【研究方向与特色】
智能制造；先进能源结构材料；轻金属结构-功能一体化材料；新型纳米晶和高熵合金。
【近五年科研项目】
1. 北京市科委，核电蒸汽发生器热交换管和二回路管道的服役行为评价技术研发，2018/6-2020/12；
2. 钢铁研究总院，蒸汽发生器主体结构材料性能测试与组织分析，2017/8-2020/7；
3. 国家工业与信息化部新模式类项目，高端铝合金智能制造新模式，2016/6-2019/12；
4. 北京市自然科学基金，核级铸造奥氏体-铁素体不锈钢热老化诱导点蚀形成的微观机制，2016/1-2018/12；
5. 重庆理工大学，7075铝合金及其复合材料黏度测试，2016/1-2017/12；
6. 国家自然科学基金，具有成分梯度界面层的铜/金刚石复合材料的导热性能研究，2013/1-2016/12；
7. 国家863计划重大项目，AP1000压水堆主管道材料与成形关键技术，2012/1-2015/12；
8. 江西省铜钨新材料重点实验室，高导热率铜/金刚石复合材料研究，2013/1-2016/12；
9. 国家973计划，高温高压水中的材料微动损伤的规律和机制研究，2010/1-2015/12；
10. 北京市自然科学基金，微量添加Sn、Nb和辐照对ZrCuFeAl大块非晶性能的影响，2012/01-2014/12；
11. 教育部和创新团队发展计划，块体非晶合金的原子结构、本征特性与应用潜力的基础研究，2011/01-2013/12；
12. 科技部重点专项，核电站设备老化和寿命管理软件研发先进技术研究，2010/01-2014/12；
13. 国家863计划重点项目，大型压水堆核电站关键结构材料与工程应用技术，2008/12-2011/6。
【近五年在学术期刊上发表的论文】
1. Ye You, Yuefeng Chen, Bin Yang, Passive film properties of Z3CN20.09M duplex stainless steel aged for different times, Materials and Corrosion, 2018, 69(1): 1~13.
2. Yunzhu Shi, Liam Collins, Rui Feng, Chuan Zhang, Nina Balke, Peter K.Liaw, Bin Yang, Homogenization of Al_xCoCrFeNi high-entropy alloys with improved corrosion resistance, Corrosion Science, 2018, 133: 120~131.
3. Yunzhu Shi, Liam Collins, Nina Balke, Peter K. Liaw, Bin Yang, In-situ electrochemical-AFM study of localized corrosion of Al_xCoCrFeNi high-entropy alloys in chloride solution, Applied Surface Science, 2018, 43(9): 533~544.
4. Yuefeng Chen, Bo Chen, Fang Dong, Bin Yang, Shilei Li, Xiaoyi Yu, Pitting behavior of thermally aged Z3CN20.09M cast stainless steel for primary coolant pipe of nuclear power plant, Engineering Failure Analysis, 2018, 83:1~8.
5. Yunzhu Shi, Bin Yang, Xie Xie, Jamieson Brechtl, Karin A. Dahmen, Peter K. Liaw, Corrosion of Al_xCoCrFeNi high-entropy alloys: Al-content andpotential scan-rate dependent pitting behavior, Corrosion Science, 2017, 119(1): 33~45.
6. Lingyun Chen, Hao Lan, Chuanbing Huang, Bin Yang, Lingzhong Du, Weigang Zhang, Hot corrosion of Ni, Cr, and 80Ni20Cr in the presence of NaCl and water vapor at 750 °C, Materials and Corrosion, 2017, 68(10):1172~1179.
7. Lingyun Chen, Hao Lan, Chuanbing Huang, Bin Yang, Lingzhong Du, Weigang Zhang, Hot corrosion behavior of porous nickel-based alloys containing molybdenum in the presence of NaCl at 750°C, Engineering Failure Analysis, 2017, 79: 245~252.
8. Yunzhu Shi, Bin Yang, Peter K. Liaw, Corrosion-Resistant High-Entropy Alloys: A Review, Metals, 2017, 7: 1~18.
9. Huanchun Wu, Bin Yang, Yuefeng Chen, Xudong Chen, Effect of oxidation on the fatigue crack propagation behavior of Z3CN20.09M duplex stainless steel in high temperature water, Nuclear Engineering & Technology, 2017, 49:744~751.
10. Yuefeng Chen, Xudong Chen, Xin Dai, Ye You, Bin Yang, Effect of spinodal decomposition on the pitting corrosion resistance of Z3CN20.09M duplex stainless steel, Materials and Corrosion, 2017, 68(9): 1~9.
11. Guisheng Gan, Bin Yang, Qian Gao, Yiping Wu, Mingbo Yang, Microstructure and viscosity of particles reinforced 7075 Al matrix composites, Materials Transactions, 2017, 57: 1296~1299.
12. Guisheng Gan, Bin Yang, Bo Zhang, Xin Jiang, Yunlong Shi, Yiping Wu, Refining mechanism of 7075 Al alloy by in-situ TiB₂ particles, Materials, 2017, 132: 1~11.
13. Shenglong Wang, Yanhui Sun, Bin Yang, Mingxian Zhang, Grain size control method for the nozzles of AP1000 primary coolant pipes, Nuclear Engineering & Design, 2017, 314: 121~130.
14. 陈凌云，兰昊，黄传兵，杨滨，房师阁，张伟刚，多孔NiCr在750℃ NaCl沉积盐中的热腐蚀机理研究，航空制造技术，2017, 527(8):32-36.
15. Huanchun Wu, Bin Yang, Shenglong Wang, Minxian Zhang, Yunzhu Shi, Yuefeng Chen, Yanhui Sun, Effect of thermal aging on corrosion fatigue of Z3CN20.09M duplex stainless steel in high temperature water, Materials Science and Engineering A, 2016, 655: 183~192.
16. Shenglong Wang, Xiaoyi Yu, Bin Yang, Mingxian Zhang, Huanchun Wu, FEM analysis and experimental verification of the integral forging process for AP1000 primary coolant pipe, Metallurgical and Materials Transactions A, 2016, 47: 5114~5124.
17. Shenglong Wang, Mingxian Zhang, Huanchun Wu, Bin Yang, Study on the dynamic recrystallization model and mechanism of nuclear grade 316LN austenitic stainless steel, Materials Characterization, 2016, 118: 92~101.
18. Shenglong Wang, Bin Yang, Minxian Zhang, Huanchun Wu, Jintao Peng, Yang Gao, Numerical simulation and experimentalverification of microstructure evolution in large forged pipe used for AP1000nuclear power plants, Annals of Nuclear Energy, 2016, 87(1): 176~185.
19. Shenglong Wang, Bin Yang, Mingxian Zhang, Huanchun Wu, The establishment and application of 316LN stainless steel database for AP1000 primary coolant Pipes, Materials Science Forum, 2016, 850:341-347.
20. Mingxian Zhang, Bin Yang, Shenglong Wang, Huanchun Wu, Mechanisms of thermo-mechanical process on grain boundary character distribution of 316L austenitic stainless steel, Materials Science Forum, 2016, 850:965-970.
21. Qian Gao, Bin Yang, Han Mei, Huanchun Wu, Microstructure and Wear Resistance of Semisolid TiB₂/7050 Composites Produced by Serpentine Tube Pouring TechniqueMaterials and Manufacturing Processes, 2016, 31: 1029~1036.
22. 张铭显，杨滨，王胜龙，武焕春，形变热处理对316L 奥氏体不锈钢晶界特征分布的影响，2016, 41(4):55~58.
23. 王胜龙，杨滨，张铭显，武焕春，周国华，316LN 不锈钢大型锻件镦粗过程中侧表面裂纹的预测，热加工工艺，2016, 45(1):86~89.
24. 王鹏，杨滨，王胜龙，赵天明，AP1000主管道冷弯壁厚减薄，工程科学学报，2016, 38(8) : 1160~1167.
25. Huanchun Wu, Bin Yang, Shenglong Wang, Minxian Zhang, Yunzhu Shi,Yanhui Sun, Effect of thermal aging on corrosion fatigue of Z3CN20.09M duplex stainless steel in high temperature water, Materials Science and Engineering A, 2015, 655: 183~192.
26. Minxian Zhang, Bin Yang, Parametric optimization of DL-EPR technique for evaluating IGC susceptibility of 316LN type stainless steel using the Taguchi method, Materials and Corrosion, 2015, 67: 271~276.
27. Huanchun Wu, Bin Yang, Shenglong Wang, Minxian Zhang, Effect of oxidation behavior on the corrosion fatigue crack initiation and propagation of 316LN austenitic stainless steel in high temperature water, Materials Science and Engineering A, 2015, 633: 176~183.
28. Huanchun Wu, Bin Yang, Yunzhu Shi, Qian Gao, Yongqiang Wang, Crack Initiation Mechanism of Z3CN20.09M Duplex Stainless Steel during Corrosion Fatigue in Water and Air at 290 °C , Journal of Materials Science & Technology, 2015, 31(11): 1144~1150.
29. 高倩，杨滨，甘贵生，蛇形管浇注制备TiB₂/7075半固态浆料及数值模拟，特种铸造及有色合金，2015, 35(9):936~940.
30. 高倩，杨滨，7075及TiB₂/7075 复合材料流变压铸数值模拟，热加工工艺，2015, 44(17):72~75.
31. 杨滨，李鑫，罗文东，李宇翔，微量添加Sn和Nb对Zr-Cu-Fe-Al块体非晶合金热稳定性和塑性的影响，金属学报，2015, 51(4): 465~472.
32. 李晓烨，杨滨，徐仁根，张磊，新型TiB2/Si-Al 电子封装复合材料的微观组织及其导热性能，热处理技术与装备，2015, 36(6): 28-33.
33. 陈博，周文浩，尚成嘉，杨滨. 提高低碳微合金钢中残余奥氏体数量的热处理新工艺，热处理技术与装备，2015, 36(5): 56~61.
34. Qian Gao, Bin Yang, Guisheng Gan, Rheological behavior of semi-solid TiB₂/7075 composites and simulation of their rheocasting processes, Chnia Foundry, 2015, 12(5): 354~361.
35. Huanchun Wu, Bin Yang, Yongqiang Wang, Effect of sigma phase on the low cycle fatigue property of Z3CN20.09M cast duplex stainless steel in high temperature water, Materials and Corrosion, 2015, 66(7): 663~669.
36. Yunzhu Shi, Bin Yang, Minxian Zhang, Huanchun Wu, Shenglong Wang, Determination of intergranular corrosion susceptibility of Z3CN20.09M cast duplex stainless steel by a modified double loop electrochemical potentiokinetic reactivation method, Energy Materials 2014, 11:4~6.
37. Qian Gao, Bin Yang, Guisheng Gan, Huanchun Wu, Numerical simulation of filling for 7075 Alloy and TiB₂/7075 composites wheel prepared by low pressure die casting, Advanced Materials Research, 2014, 904:173~179.
38. 周国华，杨滨，王胜龙，核电站一回路主管道凸台整体锻造工艺数值模拟，热加工工艺，2014, 43(9): 106~108.
39. 王永强，董芳，杨滨，热老化对核电站主管道Z3CN20.09M不锈钢点蚀性能的影响，北京科技大学学报，2014, 36(5): 644~649.
40. 武焕春，杨滨，周国华，热变形对316LN奥氏体不锈钢微观组织和力学性能的影响，材料导报，2014, 28(8):23~36.
41. Huanchun Wu, Bin Yang, Yongqiang Wang, Effect of sigma phase on the low cycle fatigue property of Z3CN20.09M cast duplex stainless steel in high temperature water, Nuclear Materials, 2014, 12:8~12.
42. Yongqiang Wang, Jun Han, Bin Yang, Xitao Wang, Strengthening of σ phase in a Fe20Cr9Ni cast austenite stainless steel, Materials Characterization, 2013, 84: 120~125.
43. 王永强，韩军，杨滨，武焕春，王西涛，核电站主管道Z3CN20.09M不锈钢中金属间相的析出行为，金属学报，2013, 4: 415~420.
44. 赵妍冰, 杨滨，刘克明，金刚石/铜电子封装复合材料的研究状况及展望，热处理技术与装备，2013, 34(6): 31-36.
45. Lei Zhang, Bin Yang, Microstructural characterisation and thermal stability of in situ TiB₂/60Si-Al composite synthesised by displacement reactions and spray forming , Materials Science and Technology, 2013, 29(11): 1277~1282.
46. Bin Yang, Hanbin Chen, Lu Yang, Haibo Zhang, Zhigang Zak Fang, The Formation of Twins in Al-10Zn-3Mg-1.8Cu Alloy by Cryomilling , JOM, 2013, 65(8): 967~972.
47. Yongqiang Wang, Jun Han, Huanchun Wu, Bin Yang, Xitao Wang, Effect of sigma phase precipitation on the mechanical and wear properties of Z3CN20.09M cast duplex stainless steel, Nuclear Engineering and Design, 2013, 259: 1~7.
48. Yongqiang Wang, Jun Han, Bin Yang, Xitao Wang, Strengthening of sigma phase in a Fe20Cr9Ni cast austenite stainless steel, Materials Characterization, 2013, 84: 120~125.
49. Lei Zhang, Bin Yang, Microstructural characterisation and thermal stability of in situ TiB2/60Si-Al composite synthesised by displacement reactions and spray forming , Materials Science and Technology, 2013, 29(11): 1277~1282.
50. Yongqiang Wang, Jun Han, Huanchun Wu, Bin Yang, Xitao Wang, Effect of sigma phase precipitation on the mechanical and wear properties of Z3CN20.09M cast duplex stainless steel, Nuclear Engineering and Design, 2013, 259: 1~7.
51. Yongqiang Wang, Bin Yang, Jun Han, Huanchun Wu, Xitao Wang, Effect of Precipitated Phases on the Pitting Corrosion of Z3CN20.09M Cast Duplex Stainless Steel, Materials Transactions, 2013, 54(5): 839~843.