关键词: 油滴/
油膜层/
气泡破裂/
数值模拟
English Abstract
Numerical simulation of deformation and rupture process of bubble in an oil film impacted by an oil droplet
Zhou Jian-Hong1,Tong Bao-Hong1,
Wang Wei2,
Su Jia-Lei1
1.School of Mechanical Engineering, Anhui University of Technology, Maanshan 243032, China;
2.Institute of Tribology, Hefei University of Technology, Heifei 230009, China
Fund Project:Project supported by the National Natural Science Foundation of China (Grant No. 51475135), the Tribology Science Fund of State Key Laboratory of Tribology, Tsinghua University, China (Grant No. SKLTKF17B01), and the Graduate Innovation Foundation of Anhui University of Technology, China (Grant No. 2015040).Received Date:18 January 2018
Accepted Date:23 February 2018
Published Online:05 June 2018
Abstract:Impact of oil droplet on oil film usually takes place in the lubrication process of rotating mechanical parts and machinery which can easily lead to bubble entrainment. Bubbles have important influences on the motion process of the oil droplet impacting on the oil film and also on the formation quality of the oil film layer. An oil droplet impacting on the oil film which contains a bubble is simulated numerically based on the coupled level set and the method of determining volume fraction. The bubble deformation process in the oil film during an oil droplet impacting on the oil film is investigated by the simulation method. The influences of the bubble size and the bubble position on the bubble deformation characteristic are also analyzed. The dynamic mechanism of the bubble rupture is discussed. The numerical results show that as the oil droplet impacts on the oil film, the bubble may rupture on the free surface, presenting stable deformation, or rupture in the oil film, which is greatly influenced by the bubble size. When the bubble diameter is in a range between 10 m and 20 m, the bubble deformation becomes more serious with the increase of bubble diameter, and the rupture of bubble on the free surface may occur over time. When the bubble diameters are in a range between 20 m and 30 m, the bubble rupture occurs in a short time after the bubble has reached a maximum deformation, and there is no obvious relationship between the maximum bubble deformation and the bubble diameter. The diameter of 20 m is a critical value for a bubble to rupture on a free surface or inside an oil film, with which a bubble can keep stable in an oil film layer. As the bubble position changes, the bubble deformation process changes correspondingly. Under the same impact conditions, bubbles at the top of the oil film are more likely to deform than those in the center of the oil film. Bubbles at the bottom of the oil film have the smallest total deformation and finally attach to the wall. The bubble rupture is caused by the instability of the gas-liquid interface and the surface tension. The viscous shear force also plays an important role when the bubble rupture takes place in the oil film.
Keywords: oil droplet/
oil film/
bubble rupture/
numerical simulation
