刘永信2,,,
张杰3,
范陈清3
1.内蒙古大学计算机学院 呼和浩特 010021
2.内蒙古大学电子信息工程学院 呼和浩特 010021
3.自然资源部第一海洋研究所 青岛 266061
基金项目:国家重点研发计划(2017YFC1405600)，自然资源部海洋遥测工程技术研究中心创新青年基金项目(2017002)
详细信息
作者简介:王朝霞：男，1985年生，博士生，研究方向为3维高度成像技术、卫星组网观测技术等
刘永信：男，1955年生，博士，教授，博士生导师，研究方向为雷达成像技术、图像处理、信息融合等
张杰：男，1963年生，博士，研究员，博士生导师，研究方向为海洋遥感遥测技术等
范陈清：男，1983年生，副研究员，研究方向为高度遥感技术、微波雷达成像等
通讯作者:刘永信 yxliu@imu.edu.cn
中图分类号:TN911.7; TP751.1计量
文章访问数:350
HTML全文浏览量:140
PDF下载量:25
被引次数:0
出版历程
收稿日期:2020-01-28
修回日期:2020-12-15
网络出版日期:2021-01-05
刊出日期:2021-06-18
Interference Phase Unwrapping Method Using JVC Algorithm to Generate Branch Cuts
Zhaoxia WANG1,Yongxin LIU2,,,
Jie ZHANG3,
Chenqing FAN3
1. College of Computer Science, Inner Mongolia University, Hohhot 010021, China
2. College of Electronic Information Engineering, Inner Mongolia University, Hohhot 010021, China
3. First Institute of Oceanography, Ministry of Natural Resources, Qingdao 266061, China
Funds:The National Key R&D Plan (2017YFC1405600), The Youth Innovation Fund Project in Marine Telemetry Engineering Technology Research Center of Ministry of Natural Resources (2017002)
摘要
摘要:海面高程3维成像是随着天宫二号发射而实现的技术，相位解缠是3维成像高度计高程反演的关键步骤。为改进Goldstein枝切法，缩短干涉相位图中枝切线的总长度，提升相位解缠的精确性，该文提出一种基于JVC全局最优线性分配算法生成枝切线的相位解缠方法。首先找出干涉相位图中的所有残差点并计算每一对异号残差点之间的距离；通过对比每对残差点之间的距离和各自与最近边界的距离和，确定采用JVC算法放置枝切线还是在残差点与边界之间直接放置枝切线，使得平衡枝切线的总长度最短。通过对3维成像高度计海面高程仿真干涉相位图和Etna火山地区干涉图像进行解缠实验并与其他3种算法进行对比，表明该算法的解缠结果与真实相位值误差相对较小，而且能够有效避免“孤岛现象”的产生。
关键词:相位解缠/
3维成像高度计/
Jonker-Volgenant-Castanon算法/
枝切线
Abstract:Three-dimensional imaging of sea surface altitude is a technology realized with the launch of Tiangong-2. Phase unwrapping is a key step in elevation inversion of three-dimensional radar imaging altimeter. In order to improve the branch cut algorithm proposed by Goldstein, shorten the total length of branch cuts in interferogram and advance the accuracy of phase unwrapping, a method that based on Jonker-Volgenant-Castanon (JVC) global optimal linear assignment algorithm to generate branch cuts is proposed in this paper. At first, all residual points in the interferogram are found out, and the distance between all opposite polarity pairs is calculated. Then, by comparing the distance between each pair of residual points and the distance sum between both of them and the nearest boundary, it is determined whether to place the branch cuts directly between the residual points and the boundaries or to use JVC algorithm. So, the shortest total length of the balanced branch cuts is obtained. The experiments of unwrapping are carried out by using the interferogram both of simulated three-dimensional imaging altimeter sea surface elevation and Etna volcano area. By comparison with the other three algorithms, it shows that the error between the unwrapping result of the proposed algorithm and the real phase value is relatively small. Also, it can void the “islanding phenomenon” effectively.
Key words:Phase unwrapping/
Three-dimensional imaging altimeter/
Jonker-Volgenant-Castanon(JVC) algorithm/
Branch cuts
PDF全文下载地址:
https://jeit.ac.cn/article/exportPdf?id=e4fa395c-8dbc-4efe-a38a-193edb14f987
