删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

CFRP/Al胶接接头形貌特征对连接性能影响

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
CFRP/Al胶接接头形貌特征对连接性能影响
The Effect of Morphology Characteristics of CFRP/Al Single Lap Joints on Bonding Properties
投稿时间:2019-06-11
DOI:10.15918/j.tbit1001-0645.2019.066
中文关键词:异质材料连接碳纤维复合材料单搭接接头胶接结构设计
English Keywords:heterogeneous material connectioncarbon fiber reinforced plastic (CFRP)single lap jointsbonded jointsstructure design
基金项目:国家重点研发计划项目(2016YFB0101606);国家自然科学基金资助项目(51675044)
作者单位
陈潇凯北京理工大学 机械与车辆学院, 北京 100081
符东北京理工大学 机械与车辆学院, 北京 100081
孙凌玉北京航空航天大学 交通科学与工程学院, 北京 100191
李孟强北京新能源汽车股份有限公司, 北京 100176
摘要点击次数:1882
全文下载次数:1233
中文摘要:
为解决汽车轻量化设计与制造中的异质材料间的连接问题,基于内聚力模型模型,对碳纤维增强复合材料(CFRP)/铝合金单搭接胶接接头,建立了接头有限元分析模型,并对有限元模型的有效性进行了试验验证.构建了3种具有不同形貌特征的CFRP/Al胶接接头结构方案,以单向拉伸载荷下的极限破坏载荷和破坏吸能量作为性能指标.结果表明:相对于普通单搭接接头,弧形接头破坏载荷和吸能量分别降低11.3%和9.88%;矩形槽接头失效载荷虽有所降低,但由于能更有效地发挥胶层中部区域的作用,在接头吸能特性方面有较大提升,接头抗冲击性能提升了91.63%.
English Summary:
The multi-material structures is one of the effective technical approaches to realize vehicle weight reduction, and the technical difficulty is the connection between heterogeneous materials. For the CFRP/Al single-lap joints, based on the cohesive force model, one finite element analysis model was established, and the effectiveness of the finite element model was verified through experiments. Three CFRP/Al adhesive joints with different morphological features were constructed, and the ultimate failure load and failure energy absorption under uniaxial tensile load were used as performance indicators. The results show that compared with the ordinary single lap joints, the arc joint damage load and energy absorption are reduced by 11.3% and 9.88%, respectively. Although the failure load of rectangular slot joints has been reduced, but due to the more effective use of the middle region of the adhesive layer, the joint energy absorption characteristics have been greatly improved, and the joint impact resistance performance has increased by 91.63%.
查看全文查看/发表评论下载PDF阅读器
相关话题/北京 北京理工大学 机械 车辆 汽车