删除或更新信息,请邮件至freekaoyan#163.com(#换成@)

闭孔泡沫铝压缩力学性能的实验和三维有限元模拟

本站小编 Free考研考试/2021-12-21

本文二维码信息
二维码(扫一下试试看!)
闭孔泡沫铝压缩力学性能的实验和三维有限元模拟
Experiments and Three-Dimensional Finite Element Simulations on the Compressive Mechanical Properties of Closed-Cell Aluminum Foam
投稿时间:2020-05-07
DOI:10.15918/j.tbit1001-0645.2020.075
中文关键词:闭孔泡沫铝CT图像有限元模型力学性能数值模拟
English Keywords:closed-cell aluminum foamCT imagefinite element modelmechanical propertynumerical simulation
基金项目:装备预研领域基金资助项目(61407200204)
作者单位
戴开达北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
吴东旭北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
张志成北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
陈鹏万北京理工大学 爆炸科学与技术国家重点实验室, 北京 100081
摘要点击次数:477
全文下载次数:305
中文摘要:
基于X射线电子计算机断层扫描技术,建立了反映闭孔泡沫铝真实结构的三维有限元模型.对闭孔泡沫铝准静态和动态压缩力学性能进行了实验和数值模拟,分析了闭孔泡沫铝的变形特性及力学性能,验证了模型的可靠性.结果表明,准静态压缩下,试件主要沿加载轴45°方向产生塑性变形.压缩速率为低速时,其变形模式与准静态相同.闭孔泡沫铝试件截面上结构薄弱处首先出现应力集中,材料达到塑性屈服.在高速压缩下,试件加载端首先达到塑性屈服.比较闭孔泡沫铝不同应变率下的屈服强度,动态压缩下的屈服强度远高于准静态压缩下的.应变率280~700 s-1下,其屈服强度变化不明显,应变率继续升高至2 000 s-1,屈服强度略微提高.
English Summary:
Based on X-ray electronic computed tomography technology,a three-dimensional finite element model was established to reflect the true structure of closed-cell aluminum foam.Firstly,the quasi-static and dynamic compressive mechanical properties of closed-cell aluminum foam were analyzed based on experiments and numerical simulations.Then the deformation characteristics and mechanical properties of closed-cell aluminum foam were analyzed.Finally,the reliability of the model was verified.The results show that a long platform stage appears on the stress-strain curve of closed-cell aluminum foam under quasi-static and dynamic loading.Under quasi-static compression,the specimens exhibit local plastic deformation mainly along the loading axis at 45°.At low compression rate,the deformation mode is the same as under quasi-static compression,stress concentration occurs first in the structural weakness of the closed-cell aluminum foam specimen,until material plasticity bend.Under high-speed compression,the loading end of the specimen first reaches the yield stress.Comparing the yield strength at different strain rates,the yield strength of closed-cell aluminum foam under dynamic compression is higher than that of quasi-static compression.When the strain rate of closed-cell aluminum foam specimen is 280~700 s-1,the change of yield strength is not obvious.The strain rate increases to 2 000 s-1,and the yield strength increases slightly.
查看全文查看/发表评论下载PDF阅读器
相关话题/技术 北京理工大学 科学 实验室 北京