二维码（扫一下试试看！） | | 活塞隔热性能有限元分析及试验验证 | | Finite Element Analysis and Experimental Verification of Heat Insulation Performance of Piston | | 投稿时间：2020-06-17 | | DOI：10.15918/j.tbit1001-0645.2020.101 | | 中文关键词:柴油机活塞隔热热流分配 | | English Keywords:diesel enginepistonheat insulationheat flux distribution | | 基金项目: | | | 摘要点击次数:345 | | 全文下载次数:210 | | 中文摘要: | | 采用有限元计算方法和试验验证相结合对某复合隔热结构活塞的隔热性能进行了研究.首先基于性能仿真计算及经验公式确定了活塞换热边界条件，然后利用有限元热分析方法得到了该活塞的温度场及热流分配模型，并探讨了复合隔热结构活塞热流分配模型发生变化的原因.最后通过复合隔热结构活塞温度场模拟试验对活塞的隔热性能进行了试验验证.研究结果表明，隔热垫、气隙等隔热结构提高了活塞的热、机载荷承载能力，活塞隔热度超过了60%；复合隔热结构活塞温度场模拟试验结果与有限元计算结果之间误差在5%以内，说明有限元计算结果具有很高的工程参考价值. | | English Summary: | | The heat insulation performance of a new heat insulated piston was studied based on finite element analysis and experimental verification. Firstly, the heat exchange coefficient of the piston was determined by means of performance simulation calculation and empirical equations. Secondly, the temperature field and the heat flux distribution model were obtained using finite element thermal analysis. And the changes of heat flux distribution model were also discussed for the piston with compound heat insulation structure. Finally, the heat insulation performance of the piston was verified by the temperature field simulation test. The results show that the heat insulation structures, such as heat insulation pad and air gap, can greatly improve the heat and load carrying capacity of the piston. And the heat insulation degree of the piston can exceed 60%. The error between the simulation results and the finite element calculation results is within 5%, which indicates that the finite element calculation results have high engineering reference value. | | 查看全文查看/发表评论下载PDF阅读器 | |
王建中,游玉,王鹤.变结构陆空机器人自主跨域越障技术研究[J].北京理工大学学报（自然科学版）,2021,41(8):840~846.WANGJianzhong,YOUYu,WANGHe.AutonomousCross-DomainObstacleNegotiationResearchofaVari ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21刘检华,任策,夏焕雄,敖晓辉,林圣享.基于仿真的选区激光熔化工艺结构变形补偿设计优化[J].北京理工大学学报（自然科学版）,2021,41(9):911~917.LIUJianhua,RENCe,XIAHuanxiong,AOXiaohui,LINShengxiang.Simulation-Base ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21曾祥,刘彦,许泽建,黄风雷.爆炸载荷作用下玻璃钢/硬质聚氨酯泡沫夹层结构抗冲击性能实验研究[J].北京理工大学学报（自然科学版）,2021,41(11):1145~1153.ZENGXiang,LIUYan,XUZejian,HUANGFenglei.ExperimentalStudyonImpac ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21胡宇辉,王旭,胡家铭,龚建伟,王克,李桂鹏,梅程.越野环境下无人驾驶车辆技术研究综述[J].北京理工大学学报（自然科学版）,2021,41(11):1137~1144.HUYuhui,WANGXu,HUJiaming,GONGJianwei,WANGKe,LIGuipeng,MEICheng.AnO ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21向建华,刘健,钟乘龙,魏满晖,王宇江,张利敏.工艺参数优化下连杆摆动副衬套结构强度研究[J].北京理工大学学报（自然科学版）,2021,41(11):1154~1161.XIANGJianhua,LIUJian,ZHONGChenglong,WEIManhui,WANGYujiang,ZHANGLi ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21卢炽华,陈弯,刘志恩,杜松泽.微穿孔板简化仿真方法在双层微穿孔结构中的应用[J].北京理工大学学报（自然科学版）,2019,39(1):1~6.LUChi-hua,CHENWan,LIUZhi-en,DUSong-ze.ASimplifiedSimulationMethodforMicro-Perf ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21李延骁,左正兴,冯慧华,旷年玲,杨君.同结构活塞在FPE与CE两种工作模式下应力变形差异[J].北京理工大学学报（自然科学版）,2019,39(3):228~234.LIYan-xiao,ZUOZheng-xing,FENGHui-hua,KUANGNian-ling,YANGJun.PistonS ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21张鹏,王志军,赵鹏铎,张磊,刘瀚,徐豫新.聚脲弹性体涂覆结构抗侵性能与层间作用机制研究[J].北京理工大学学报（自然科学版）,2019,39(4):337~342,358.ZHANGPeng,WANGZhi-jun,ZHAOPeng-duo,ZHANGLei,LIUHan,XUYu-xin.Pene ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21江维,王杰,陈伟,余联庆,李红军,吴功平.半结构环境中电力作业机器人机械手鲁棒轨迹跟踪控制[J].北京理工大学学报（自然科学版）,2019,39(4):391~398.JIANGWei,WANGJie,CHENWei,YULian-qing,LIHong-jun,WUGong-ping.Manipu ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21王鹏,芦浩,王子元,刘金枝,薛茜男.新型折线形共面EBG电源层结构的噪声抑制特性验证与分析[J].北京理工大学学报（自然科学版）,2019,39(5):514~519.WANGPeng,LUHao,WANGZi-yuan,LIUJin-zhi,XUEQian-nan.AnalysisofSSNSup ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21
| |
