二维码（扫一下试试看！） | | 工艺参数优化下连杆摆动副衬套结构强度研究 | | Study on Structure Strength of Bushing in Swinging Pair of Connecting Rod Based on Optimization of Process Parameters | | 投稿时间：2020-09-21 | | DOI：10.15918/j.tbit1001-0645.2020.150 | | 中文关键词:衬套强力旋压残余应力参数优化结构强度 | | English Keywords:bushingpower spinningresidual stressparameter optimizationstructural strength | | 基金项目:国家自然科学基金资助项目（51575045） | | | 摘要点击次数:104 | | 全文下载次数:109 | | 中文摘要: | | 文中运用有限元法仿真了强力旋压下衬套中产生的残余应力，并基于温度等效模拟法获得了考虑残余应力下的连杆摆动副结构强度特性，进而开展了针对连杆摆动副衬套刚强度特性受减薄率、进给比和热处理温度等衬套工艺参数的规律分析和优化计算.结果表明，减薄率、主轴转速、进给比对残余应力值影响不大，残余应力值沿轴向呈对称分布，且两端较大；在连杆摆动副中，残余应力会使连杆摆动副工作中的应力与变形增大，残余应力较大处增幅明显，而对接触压力影响较小；由响应面优化该型衬套的应力和变形下的最优工艺参数为减薄率28.37%、进给比0.154和热处理温度261.73℃. | | English Summary: | | In this paper, the residual stress produced in bushing under strong spinning was simulated by finite element method, and the structure strength characteristics of the swinging pair of connecting rod with residual stress were analyzed based on temperature equivalent simulation method. Furthermore, the law analysis and optimization calculation of bushing process parameters such as thinning rate, feed ratio and heat treatment temperature were carried out according to the stiffness and strength characteristics of the bushing in swinging pair of connecting rod. The results show that the thinning rate, spindle speed and feed ratio have little effect on the value of residual stress. The residual stress is distributed symmetrically along the axial direction and is larger at both ends. In the swinging pair working of connecting rod, the residual stress can make the maximum stress and maximum deformation increase, and where the residual stress is larger, the larger of the increase. But the residual stress has a little effect on the contact pressure. Using the response model, the optimal process parameters got based on the stress and deformation of this type of bushing are the thinning rate 28.37%, the feed ratio 0.154 and the heat treatment temperature 261.73 ℃. | | 查看全文查看/发表评论下载PDF阅读器 | |
魏巍,杨印阳,孔令兴,王睿,闫清东.液力缓速器放液支路先导比例电磁阀瞬态特性优化[J].北京理工大学学报（自然科学版）,2019,39(1):14~21.WEIWei,YANGYin-yang,KONGLing-xing,WANGRui,YANQing-dong.TransientCharacter ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21江维,王杰,陈伟,余联庆,李红军,吴功平.半结构环境中电力作业机器人机械手鲁棒轨迹跟踪控制[J].北京理工大学学报（自然科学版）,2019,39(4):391~398.JIANGWei,WANGJie,CHENWei,YULian-qing,LIHong-jun,WUGong-ping.Manipu ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21吕天佟,王登峰,王传青.隐式参数化白车身多目标协同优化设计[J].北京理工大学学报（自然科学版）,2019,39(5):447~453.LTian-tong,WANGDeng-feng,WANGChuan-qing.Multi-ObjectiveLightweightCollaborativeOpt ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21黄万友,王广灿,于明进,李彦桦,张吉诚.基于田口鲁棒优化的电动汽车驱动控制策略研究[J].北京理工大学学报（自然科学版）,2019,39(5):497~501.HUANGWan-you,WANGGuang-can,YUMing-jin,LIYan-hua,ZHANGJi-cheng.Research ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21江维,周志远,陈伟,余联庆,李红军,吴功平.高压电缆移动作业机器人机械手双闭环自主定位控制[J].北京理工大学学报（自然科学版）,2019,39(6):589~596.JIANGWei,ZHOUZhi-yuan,CHENWei,YULian-qing,LIHong-jun,WUGong-Ping.M ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21严保康,周凤星,徐波.基于GST的变速机械故障信号稀疏特征提取方法[J].北京理工大学学报（自然科学版）,2019,39(6):603~608.YANBao-kang,ZHOUFeng-xing,XUBo.SparseFeatureExtractionforVariableSpeedMachiner ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21陈德海,华铭,邹争明,任永昌.优化分级T-S模糊控制动态估计纯电动汽车电池健康状态[J].北京理工大学学报（自然科学版）,2019,39(6):609~614.CHENDe-hai,HUAMing,ZOUZheng-ming,RENYong-chang.DynamicPredictionofPure ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21陈潇凯,雷浩,刘佳辉,李孟强.控制学科在环的主动悬架多学科设计优化[J].北京理工大学学报（自然科学版）,2019,39(7):683~687.CHENXiao-kai,LEIHao,LIUJia-hui,LIMeng-qiang.MultidisciplinaryDesignOptimizatio ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21郭智蔷,吴维,刘洋,李博,苑士华.车辆最佳动力性泛函表达及数值解法[J].北京理工大学学报（自然科学版）,2019,39(7):688~693.GUOZhi-qiang,WUWei,LIUYang,LIBo,YUANShi-hua.ObjectiveFunctionalandNumericalSol ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21张栋良,李帅位,黄昕宇,陈璞.VMD参数优化及其在轴承故障特征提取中的应用[J].北京理工大学学报（自然科学版）,2019,39(8):846~851.ZHANGDong-liang,LIShuai-wei,HUANGXin-yu,CHENPu.OptimizationofVMDParameters ... 北京理工大学科研学术 本站小编 Free考研考试 2021-12-21
|
